From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Feng Tang <feng.tang@intel.com>,
Tomoya MORINAGA <tomoya.rohm@gmail.com>,
Grant Likely <grant.likely@secretlab.ca>,
Linus Walleij <linus.walleij@linaro.org>
Subject: [PATCH RFT 1/2] gpio: gpio-ml-ioh: Use spinlock for register access protection
Date: Sun, 29 Jul 2012 10:54:42 +0800 [thread overview]
Message-ID: <1343530482.5373.2.camel@phoenix> (raw)
gpio_chip.can_sleep is 0, but current code uses mutex in ioh_gpio_set,
ioh_gpio_get and ioh_gpio_direction_input functions.
Thus those functions are not callable from interrupt context.
This patch converts mutex into spinlock.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/gpio/gpio-ml-ioh.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/gpio/gpio-ml-ioh.c b/drivers/gpio/gpio-ml-ioh.c
index db01f15..6a29ee1 100644
--- a/drivers/gpio/gpio-ml-ioh.c
+++ b/drivers/gpio/gpio-ml-ioh.c
@@ -87,8 +87,7 @@ struct ioh_gpio_reg_data {
* @gpio_use_sel: Save GPIO_USE_SEL1~4 register for PM
* @ch: Indicate GPIO channel
* @irq_base: Save base of IRQ number for interrupt
- * @spinlock: Used for register access protection in
- * interrupt context ioh_irq_type and PM;
+ * @spinlock: Used for register access protection
*/
struct ioh_gpio {
void __iomem *base;
@@ -97,7 +96,6 @@ struct ioh_gpio {
struct gpio_chip gpio;
struct ioh_gpio_reg_data ioh_gpio_reg;
u32 gpio_use_sel;
- struct mutex lock;
int ch;
int irq_base;
spinlock_t spinlock;
@@ -109,8 +107,9 @@ static void ioh_gpio_set(struct gpio_chip *gpio, unsigned nr, int val)
{
u32 reg_val;
struct ioh_gpio *chip = container_of(gpio, struct ioh_gpio, gpio);
+ unsigned long flags;
- mutex_lock(&chip->lock);
+ spin_lock_irqsave(&chip->spinlock, flags);
reg_val = ioread32(&chip->reg->regs[chip->ch].po);
if (val)
reg_val |= (1 << nr);
@@ -118,7 +117,7 @@ static void ioh_gpio_set(struct gpio_chip *gpio, unsigned nr, int val)
reg_val &= ~(1 << nr);
iowrite32(reg_val, &chip->reg->regs[chip->ch].po);
- mutex_unlock(&chip->lock);
+ spin_unlock_irqrestore(&chip->spinlock, flags);
}
static int ioh_gpio_get(struct gpio_chip *gpio, unsigned nr)
@@ -134,8 +133,9 @@ static int ioh_gpio_direction_output(struct gpio_chip *gpio, unsigned nr,
struct ioh_gpio *chip = container_of(gpio, struct ioh_gpio, gpio);
u32 pm;
u32 reg_val;
+ unsigned long flags;
- mutex_lock(&chip->lock);
+ spin_lock_irqsave(&chip->spinlock, flags);
pm = ioread32(&chip->reg->regs[chip->ch].pm) &
((1 << num_ports[chip->ch]) - 1);
pm |= (1 << nr);
@@ -148,7 +148,7 @@ static int ioh_gpio_direction_output(struct gpio_chip *gpio, unsigned nr,
reg_val &= ~(1 << nr);
iowrite32(reg_val, &chip->reg->regs[chip->ch].po);
- mutex_unlock(&chip->lock);
+ spin_unlock_irqrestore(&chip->spinlock, flags);
return 0;
}
@@ -157,13 +157,14 @@ static int ioh_gpio_direction_input(struct gpio_chip *gpio, unsigned nr)
{
struct ioh_gpio *chip = container_of(gpio, struct ioh_gpio, gpio);
u32 pm;
+ unsigned long flags;
- mutex_lock(&chip->lock);
+ spin_lock_irqsave(&chip->spinlock, flags);
pm = ioread32(&chip->reg->regs[chip->ch].pm) &
((1 << num_ports[chip->ch]) - 1);
pm &= ~(1 << nr);
iowrite32(pm, &chip->reg->regs[chip->ch].pm);
- mutex_unlock(&chip->lock);
+ spin_unlock_irqrestore(&chip->spinlock, flags);
return 0;
}
@@ -447,7 +448,6 @@ static int __devinit ioh_gpio_probe(struct pci_dev *pdev,
chip->base = base;
chip->reg = chip->base;
chip->ch = i;
- mutex_init(&chip->lock);
spin_lock_init(&chip->spinlock);
ioh_gpio_setup(chip, num_ports[i]);
ret = gpiochip_add(&chip->gpio);
--
1.7.9.5
next reply other threads:[~2012-07-29 2:54 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-29 2:54 Axel Lin [this message]
2012-07-29 2:55 ` [PATCH RFT 2/2] gpio: gpio-pch: Use spinlock for register access protection Axel Lin
2012-08-13 12:02 ` Linus Walleij
2012-08-14 22:20 ` Linus Walleij
2012-08-13 12:01 ` [PATCH RFT 1/2] gpio: gpio-ml-ioh: " Linus Walleij
2012-08-14 1:25 ` Feng Tang
2012-08-14 22:18 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1343530482.5373.2.camel@phoenix \
--to=axel.lin@gmail.com \
--cc=feng.tang@intel.com \
--cc=grant.likely@secretlab.ca \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tomoya.rohm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.