All of lore.kernel.org
 help / color / mirror / Atom feed
From: Archit Taneja <archit@ti.com>
To: tomi.valkeinen@ti.com
Cc: linux-fbdev@vger.kernel.org, linux-omap@vger.kernel.org,
	sumit.semwal@ti.com, rob@ti.com, Archit Taneja <archit@ti.com>
Subject: [RFC 08/17] OMAPDSS: DSI: Maintain own copy of timings in driver data
Date: Wed, 01 Aug 2012 10:43:19 +0000	[thread overview]
Message-ID: <1343817088-29645-9-git-send-email-archit@ti.com> (raw)
In-Reply-To: <1343817088-29645-1-git-send-email-archit@ti.com>

The DSI driver currently relies on the timings in omap_dss_device struct to
configure the DISPC and DSI blocks accordingly. This makes the DSI interface
driver dependent on the omap_dss_device struct.

Make the DPI driver data maintain it's own timings field. The panel driver is
expected to call omapdss_dsi_set_timings() to set these timings before the panel
is enabled.

Signed-off-by: Archit Taneja <archit@ti.com>d
---
 drivers/video/omap2/displays/panel-taal.c |    2 ++
 drivers/video/omap2/dss/dsi.c             |   27 ++++++++++++++++++++++-----
 include/video/omapdss.h                   |    2 ++
 3 files changed, 26 insertions(+), 5 deletions(-)

diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index 3f5acc7..4775580 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -1060,6 +1060,8 @@ static int taal_power_on(struct omap_dss_device *dssdev)
 		goto err0;
 	};
 
+	omapdss_dsi_set_timings(dssdev, &td->panel_config->timings);
+
 	r = omapdss_dsi_display_enable(dssdev);
 	if (r) {
 		dev_err(&dssdev->dev, "failed to enable DSI\n");
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 27c27c4..598d965 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -333,6 +333,7 @@ struct dsi_data {
 	unsigned scp_clk_refcount;
 
 	struct dss_lcd_mgr_config mgr_config;
+	struct omap_video_timings timings;
 };
 
 struct dsi_packet_sent_handler_data {
@@ -3607,9 +3608,10 @@ static void dsi_config_vp_num_line_buffers(struct omap_dss_device *dssdev)
 	int num_line_buffers;
 
 	if (dssdev->panel.dsi_mode = OMAP_DSS_DSI_VIDEO_MODE) {
+		struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 		int bpp = dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt);
 		unsigned line_buf_size = dsi_get_line_buf_size(dsidev);
-		struct omap_video_timings *timings = &dssdev->panel.timings;
+		struct omap_video_timings *timings = &dsi->timings;
 		/*
 		 * Don't use line buffers if width is greater than the video
 		 * port's line buffer size
@@ -3738,7 +3740,7 @@ static void dsi_config_cmd_mode_interleaving(struct omap_dss_device *dssdev)
 	int ddr_clk_pre, ddr_clk_post, enter_hs_mode_lat, exit_hs_mode_lat;
 	int tclk_trail, ths_exit, exiths_clk;
 	bool ddr_alwon;
-	struct omap_video_timings *timings = &dssdev->panel.timings;
+	struct omap_video_timings *timings = &dsi->timings;
 	int bpp = dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt);
 	int ndl = dsi->num_lanes_used - 1;
 	const struct omapdss_clock_config *clks;
@@ -3996,7 +3998,7 @@ static void dsi_proto_timings(struct omap_dss_device *dssdev)
 		int vbp = dssdev->panel.dsi_vm_data.vbp;
 		int window_sync = dssdev->panel.dsi_vm_data.window_sync;
 		bool hsync_end = dssdev->panel.dsi_vm_data.vp_hsync_end;
-		struct omap_video_timings *timings = &dssdev->panel.timings;
+		struct omap_video_timings *timings = &dsi->timings;
 		int bpp = dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt);
 		int tl, t_he, width_bytes;
 
@@ -4105,6 +4107,7 @@ EXPORT_SYMBOL(omapdss_dsi_configure_pins);
 int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
+	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 	int bpp = dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt);
 	u8 data_type;
 	u16 word_count;
@@ -4135,7 +4138,7 @@ int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel)
 		/* MODE, 1 = video mode */
 		REG_FLD_MOD(dsidev, DSI_VC_CTRL(channel), 1, 4, 4);
 
-		word_count = DIV_ROUND_UP(dssdev->panel.timings.x_res * bpp, 8);
+		word_count = DIV_ROUND_UP(dsi->timings.x_res * bpp, 8);
 
 		dsi_vc_write_long_header(dsidev, channel, data_type,
 				word_count, 0);
@@ -4401,7 +4404,7 @@ static int dsi_display_init_dispc(struct omap_dss_device *dssdev)
 		dsi->mgr_config.stallmode = true;
 		dsi->mgr_config.fifohandcheck = true;
 	} else {
-		timings = dssdev->panel.timings;
+		timings = dsi->timings;
 
 		dsi->mgr_config.stallmode = false;
 		dsi->mgr_config.fifohandcheck = false;
@@ -4688,6 +4691,20 @@ int omapdss_dsi_enable_te(struct omap_dss_device *dssdev, bool enable)
 }
 EXPORT_SYMBOL(omapdss_dsi_enable_te);
 
+void omapdss_dsi_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
+	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+
+	mutex_lock(&dsi->lock);
+
+	dsi->timings = *timings;
+
+	mutex_unlock(&dsi->lock);
+}
+EXPORT_SYMBOL(omapdss_dsi_set_timings);
+
 static int __init dsi_init_display(struct omap_dss_device *dssdev)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
diff --git a/include/video/omapdss.h b/include/video/omapdss.h
index ebf2ebd..a2cd133 100644
--- a/include/video/omapdss.h
+++ b/include/video/omapdss.h
@@ -736,6 +736,8 @@ int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask,
 void omapdss_dsi_vc_enable_hs(struct omap_dss_device *dssdev, int channel,
 		bool enable);
 int omapdss_dsi_enable_te(struct omap_dss_device *dssdev, bool enable);
+void omapdss_dsi_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings);
 
 int omap_dsi_update(struct omap_dss_device *dssdev, int channel,
 		void (*callback)(int, void *), void *data);
-- 
1.7.9.5


WARNING: multiple messages have this Message-ID (diff)
From: Archit Taneja <archit@ti.com>
To: tomi.valkeinen@ti.com
Cc: linux-fbdev@vger.kernel.org, linux-omap@vger.kernel.org,
	sumit.semwal@ti.com, rob@ti.com, Archit Taneja <archit@ti.com>
Subject: [RFC 08/17] OMAPDSS: DSI: Maintain own copy of timings in driver data
Date: Wed, 1 Aug 2012 16:01:19 +0530	[thread overview]
Message-ID: <1343817088-29645-9-git-send-email-archit@ti.com> (raw)
In-Reply-To: <1343817088-29645-1-git-send-email-archit@ti.com>

The DSI driver currently relies on the timings in omap_dss_device struct to
configure the DISPC and DSI blocks accordingly. This makes the DSI interface
driver dependent on the omap_dss_device struct.

Make the DPI driver data maintain it's own timings field. The panel driver is
expected to call omapdss_dsi_set_timings() to set these timings before the panel
is enabled.

Signed-off-by: Archit Taneja <archit@ti.com>d
---
 drivers/video/omap2/displays/panel-taal.c |    2 ++
 drivers/video/omap2/dss/dsi.c             |   27 ++++++++++++++++++++++-----
 include/video/omapdss.h                   |    2 ++
 3 files changed, 26 insertions(+), 5 deletions(-)

diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index 3f5acc7..4775580 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -1060,6 +1060,8 @@ static int taal_power_on(struct omap_dss_device *dssdev)
 		goto err0;
 	};
 
+	omapdss_dsi_set_timings(dssdev, &td->panel_config->timings);
+
 	r = omapdss_dsi_display_enable(dssdev);
 	if (r) {
 		dev_err(&dssdev->dev, "failed to enable DSI\n");
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 27c27c4..598d965 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -333,6 +333,7 @@ struct dsi_data {
 	unsigned scp_clk_refcount;
 
 	struct dss_lcd_mgr_config mgr_config;
+	struct omap_video_timings timings;
 };
 
 struct dsi_packet_sent_handler_data {
@@ -3607,9 +3608,10 @@ static void dsi_config_vp_num_line_buffers(struct omap_dss_device *dssdev)
 	int num_line_buffers;
 
 	if (dssdev->panel.dsi_mode == OMAP_DSS_DSI_VIDEO_MODE) {
+		struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 		int bpp = dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt);
 		unsigned line_buf_size = dsi_get_line_buf_size(dsidev);
-		struct omap_video_timings *timings = &dssdev->panel.timings;
+		struct omap_video_timings *timings = &dsi->timings;
 		/*
 		 * Don't use line buffers if width is greater than the video
 		 * port's line buffer size
@@ -3738,7 +3740,7 @@ static void dsi_config_cmd_mode_interleaving(struct omap_dss_device *dssdev)
 	int ddr_clk_pre, ddr_clk_post, enter_hs_mode_lat, exit_hs_mode_lat;
 	int tclk_trail, ths_exit, exiths_clk;
 	bool ddr_alwon;
-	struct omap_video_timings *timings = &dssdev->panel.timings;
+	struct omap_video_timings *timings = &dsi->timings;
 	int bpp = dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt);
 	int ndl = dsi->num_lanes_used - 1;
 	const struct omapdss_clock_config *clks;
@@ -3996,7 +3998,7 @@ static void dsi_proto_timings(struct omap_dss_device *dssdev)
 		int vbp = dssdev->panel.dsi_vm_data.vbp;
 		int window_sync = dssdev->panel.dsi_vm_data.window_sync;
 		bool hsync_end = dssdev->panel.dsi_vm_data.vp_hsync_end;
-		struct omap_video_timings *timings = &dssdev->panel.timings;
+		struct omap_video_timings *timings = &dsi->timings;
 		int bpp = dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt);
 		int tl, t_he, width_bytes;
 
@@ -4105,6 +4107,7 @@ EXPORT_SYMBOL(omapdss_dsi_configure_pins);
 int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
+	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 	int bpp = dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt);
 	u8 data_type;
 	u16 word_count;
@@ -4135,7 +4138,7 @@ int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel)
 		/* MODE, 1 = video mode */
 		REG_FLD_MOD(dsidev, DSI_VC_CTRL(channel), 1, 4, 4);
 
-		word_count = DIV_ROUND_UP(dssdev->panel.timings.x_res * bpp, 8);
+		word_count = DIV_ROUND_UP(dsi->timings.x_res * bpp, 8);
 
 		dsi_vc_write_long_header(dsidev, channel, data_type,
 				word_count, 0);
@@ -4401,7 +4404,7 @@ static int dsi_display_init_dispc(struct omap_dss_device *dssdev)
 		dsi->mgr_config.stallmode = true;
 		dsi->mgr_config.fifohandcheck = true;
 	} else {
-		timings = dssdev->panel.timings;
+		timings = dsi->timings;
 
 		dsi->mgr_config.stallmode = false;
 		dsi->mgr_config.fifohandcheck = false;
@@ -4688,6 +4691,20 @@ int omapdss_dsi_enable_te(struct omap_dss_device *dssdev, bool enable)
 }
 EXPORT_SYMBOL(omapdss_dsi_enable_te);
 
+void omapdss_dsi_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
+	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+
+	mutex_lock(&dsi->lock);
+
+	dsi->timings = *timings;
+
+	mutex_unlock(&dsi->lock);
+}
+EXPORT_SYMBOL(omapdss_dsi_set_timings);
+
 static int __init dsi_init_display(struct omap_dss_device *dssdev)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
diff --git a/include/video/omapdss.h b/include/video/omapdss.h
index ebf2ebd..a2cd133 100644
--- a/include/video/omapdss.h
+++ b/include/video/omapdss.h
@@ -736,6 +736,8 @@ int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask,
 void omapdss_dsi_vc_enable_hs(struct omap_dss_device *dssdev, int channel,
 		bool enable);
 int omapdss_dsi_enable_te(struct omap_dss_device *dssdev, bool enable);
+void omapdss_dsi_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings);
 
 int omap_dsi_update(struct omap_dss_device *dssdev, int channel,
 		void (*callback)(int, void *), void *data);
-- 
1.7.9.5


  parent reply	other threads:[~2012-08-01 10:43 UTC|newest]

Thread overview: 122+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-08-01 10:31 [RFC 00/17] OMAPDSS: Change way of passing timings from panel driver to interface Archit Taneja
2012-08-01 10:43 ` Archit Taneja
2012-08-01 10:31 ` [RFC 01/17] OMAPDSS: APPLY: Constify timings argument in dss_mgr_set_timings Archit Taneja
2012-08-01 10:43   ` Archit Taneja
2012-08-01 10:31 ` [RFC 02/17] OMAPDSS: DPI: Remove omap_dss_device arguments in dpi_set_dsi_clk/dpi_set_dispc_clk Archit Taneja
2012-08-01 10:43   ` Archit Taneja
2012-08-01 10:31 ` [RFC 03/17] OMAPDSS: HDMI: Remove omap_dss_device argument from hdmi_compute_pll Archit Taneja
2012-08-01 10:43   ` Archit Taneja
2012-08-01 10:31 ` [RFC 04/17] OMAPDSS: DPI: Add locking for DPI interface Archit Taneja
2012-08-01 10:43   ` Archit Taneja
2012-08-01 10:31 ` [RFC 05/17] OMAPDSS: DPI: Maintain our own timings field in driver data Archit Taneja
2012-08-01 10:43   ` Archit Taneja
2012-08-01 10:31 ` [RFC 06/17] OMAPDSS: DPI displays: Take care of panel timings in the driver itself Archit Taneja
2012-08-01 10:43   ` Archit Taneja
2012-08-01 10:31 ` [RFC 07/17] OMAPDSS: Displays: Add locking in generic DPI panel driver Archit Taneja
2012-08-01 10:43   ` Archit Taneja
2012-08-01 10:31 ` Archit Taneja [this message]
2012-08-01 10:43   ` [RFC 08/17] OMAPDSS: DSI: Maintain own copy of timings in driver data Archit Taneja
2012-08-07 14:07   ` Tomi Valkeinen
2012-08-07 14:07     ` Tomi Valkeinen
2012-08-08  5:57     ` Archit Taneja
2012-08-08  6:09       ` Archit Taneja
2012-08-08  6:15       ` Tomi Valkeinen
2012-08-08  6:15         ` Tomi Valkeinen
2012-08-08  6:29         ` Archit Taneja
2012-08-08  6:41           ` Archit Taneja
2012-08-08  7:10           ` Tomi Valkeinen
2012-08-08  7:10             ` Tomi Valkeinen
2012-08-08  7:54             ` Archit Taneja
2012-08-08  8:06               ` Archit Taneja
2012-08-01 10:31 ` [RFC 09/17] OMAPDSS: HDMI: Use our own omap_video_timings field when setting interface timings Archit Taneja
2012-08-01 10:43   ` Archit Taneja
2012-08-01 10:31 ` [RFC 10/17] OMAPDSS: HDMI: Add a get_timing function for HDMI interface Archit Taneja
2012-08-01 10:43   ` Archit Taneja
2012-08-01 10:31 ` [RFC 11/17] OMAPDSS: HDMI: Add locking for hdmi interface get/set timing functions Archit Taneja
2012-08-01 10:43   ` Archit Taneja
2012-08-01 10:31 ` [RFC 12/17] OMAPDSS: SDI: Create a separate function for timing/clock configurations Archit Taneja
2012-08-01 10:43   ` Archit Taneja
2012-08-01 10:31 ` [RFC 13/17] OMAPDSS: SDI: Create a function to set timings Archit Taneja
2012-08-01 10:43   ` Archit Taneja
2012-08-07 14:20   ` Tomi Valkeinen
2012-08-07 14:20     ` Tomi Valkeinen
2012-08-08  5:58     ` Archit Taneja
2012-08-08  6:10       ` Archit Taneja
2012-08-01 10:31 ` [RFC 14/17] OMAPDSS: SDI: Maintain our own timings field in driver data Archit Taneja
2012-08-01 10:43   ` Archit Taneja
2012-08-01 10:31 ` [RFC 15/17] OMAPDSS: VENC: Split VENC into interface and panel driver Archit Taneja
2012-08-01 10:43   ` Archit Taneja
2012-08-01 10:31 ` [RFC 16/17] OMAPDSS: VENC: Maintain our own timings field in driver data Archit Taneja
2012-08-01 10:43   ` Archit Taneja
2012-08-01 10:31 ` [RFC 17/17] OMAPDSS: VENC: Add a get_timing function for VENC interface Archit Taneja
2012-08-01 10:43   ` Archit Taneja
2012-08-01 10:35 ` [RFC 00/17] OMAPDSS: Change way of passing timings from panel driver to interface Archit Taneja
2012-08-01 10:47   ` Archit Taneja
2012-08-07 14:32 ` Tomi Valkeinen
2012-08-07 14:32   ` Tomi Valkeinen
2012-08-08  6:05   ` Archit Taneja
2012-08-08  6:17     ` Archit Taneja
2012-08-08  6:25     ` Tomi Valkeinen
2012-08-08  6:25       ` Tomi Valkeinen
2012-08-08  6:47       ` Archit Taneja
2012-08-08  6:59         ` Archit Taneja
2012-08-08  7:27         ` Tomi Valkeinen
2012-08-08  7:27           ` Tomi Valkeinen
2012-08-08  7:59           ` Archit Taneja
2012-08-08  8:11             ` Archit Taneja
2012-08-08  8:13             ` Tomi Valkeinen
2012-08-08  8:13               ` Tomi Valkeinen
2012-08-08  8:38               ` Archit Taneja
2012-08-08  8:50                 ` Archit Taneja
2012-08-08  8:48                 ` Tomi Valkeinen
2012-08-08  8:48                   ` Tomi Valkeinen
2012-08-08  9:24                   ` Archit Taneja
2012-08-08  9:36                     ` Archit Taneja
2012-08-09 11:49 ` [PATCH v2 00/13] " Archit Taneja
2012-08-09 11:55   ` Archit Taneja
2012-08-09 11:49   ` [PATCH v2 01/13] OMAPDSS: DPI: Maintain our own timings field in driver data Archit Taneja
2012-08-09 11:56     ` Archit Taneja
2012-08-09 11:49   ` [PATCH v2 02/13] OMAPDSS: DPI displays: Take care of panel timings in the driver itself Archit Taneja
2012-08-09 11:56     ` Archit Taneja
2012-08-09 11:49   ` [PATCH v2 03/13] OMAPDSS: DSI: Maintain own copy of timings in driver data Archit Taneja
2012-08-09 11:56     ` Archit Taneja
2012-08-09 11:49   ` [PATCH v2 04/13] OMAPDSS: DSI: Add function to set panel size for command mode panels Archit Taneja
2012-08-09 11:56     ` Archit Taneja
2012-08-09 11:49   ` [PATCH v2 05/13] OMAPDSS: DSI: Update manager timings on a manual update Archit Taneja
2012-08-09 11:56     ` Archit Taneja
2012-08-09 11:49   ` [PATCH v2 06/13] OMAPDSS: HDMI: Use our own omap_video_timings field when setting interface timings Archit Taneja
2012-08-09 11:56     ` Archit Taneja
2012-08-09 11:49   ` [PATCH v2 07/13] OMAPDSS: HDMI: Add a get_timing function for HDMI interface Archit Taneja
2012-08-09 11:56     ` Archit Taneja
2012-08-14 13:02     ` Tomi Valkeinen
2012-08-14 13:02       ` Tomi Valkeinen
2012-08-14 13:15       ` Archit Taneja
2012-08-14 13:27         ` Archit Taneja
2012-08-14 14:10         ` Tomi Valkeinen
2012-08-14 14:10           ` Tomi Valkeinen
2012-08-14 17:16           ` Archit Taneja
2012-08-14 17:28             ` Archit Taneja
2012-08-09 11:49   ` [PATCH v2 08/13] OMAPDSS: HDMI: Add locking for hdmi interface get/set timing functions Archit Taneja
2012-08-09 11:56     ` Archit Taneja
2012-08-09 11:49   ` [PATCH v2 09/13] OMAPDSS: SDI: Create a function to set timings Archit Taneja
2012-08-09 11:56     ` Archit Taneja
2012-08-14 13:44     ` Tomi Valkeinen
2012-08-14 13:44       ` Tomi Valkeinen
2012-08-14 16:56       ` Archit Taneja
2012-08-14 17:08         ` Archit Taneja
2012-08-14 17:33         ` Tomi Valkeinen
2012-08-14 17:33           ` Tomi Valkeinen
2012-08-14 19:08           ` Archit Taneja
2012-08-14 19:20             ` Archit Taneja
2012-08-15  6:43             ` Tomi Valkeinen
2012-08-15  6:43               ` Tomi Valkeinen
2012-08-14 19:26         ` Rob Clark
2012-08-14 19:26           ` Rob Clark
2012-08-09 11:49   ` [PATCH v2 10/13] OMAPDSS: SDI: Maintain our own timings field in driver data Archit Taneja
2012-08-09 11:56     ` Archit Taneja
2012-08-09 11:49   ` [PATCH v2 11/13] OMAPDSS: VENC: Split VENC into interface and panel driver Archit Taneja
2012-08-09 11:56     ` Archit Taneja
2012-08-09 11:49   ` [PATCH v2 12/13] OMAPDSS: VENC: Maintain our own timings field in driver data Archit Taneja
2012-08-09 11:56     ` Archit Taneja
2012-08-09 11:49   ` [PATCH v2 13/13] OMAPDSS: VENC: Add a get_timing function for VENC interface Archit Taneja
2012-08-09 11:56     ` Archit Taneja

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1343817088-29645-9-git-send-email-archit@ti.com \
    --to=archit@ti.com \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=rob@ti.com \
    --cc=sumit.semwal@ti.com \
    --cc=tomi.valkeinen@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.