From: zonque@gmail.com (Daniel Mack)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] net: davinci_mdio: add DT bindings
Date: Thu, 2 Aug 2012 21:43:36 +0200 [thread overview]
Message-ID: <1343936616-29318-2-git-send-email-zonque@gmail.com> (raw)
In-Reply-To: <1343936616-29318-1-git-send-email-zonque@gmail.com>
Signed-off-by: Daniel Mack <zonque@gmail.com>
---
.../devicetree/bindings/net/davinci_mdio.txt | 24 +++++++++++++
drivers/net/ethernet/ti/davinci_mdio.c | 39 ++++++++++++++++++++++
2 files changed, 63 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/davinci_mdio.txt
diff --git a/Documentation/devicetree/bindings/net/davinci_mdio.txt b/Documentation/devicetree/bindings/net/davinci_mdio.txt
new file mode 100644
index 0000000..03292a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/davinci_mdio.txt
@@ -0,0 +1,24 @@
+Davinci MDIO DT bindings
+
+Required properties:
+
+ - compatible : should be "ti,davinci-mdio"
+
+Optional properties:
+
+ - bus-freq : an integer to specify the bus speed
+
+Examples:
+
+ mdio: davinci_mdio at 4a101000 {
+ compatible = "ti,davinci-mdio";
+ ti,hwmods = "davinci_mdio";
+ };
+
+ or
+
+ mdio: davinci_mdio at 4a101000 {
+ compatible = "ti,davinci-mdio";
+ reg = <0x4a101000 0x100>;
+ };
+
diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c
index b4b6015..2640cae 100644
--- a/drivers/net/ethernet/ti/davinci_mdio.c
+++ b/drivers/net/ethernet/ti/davinci_mdio.c
@@ -36,6 +36,8 @@
#include <linux/io.h>
#include <linux/pm_runtime.h>
#include <linux/davinci_emac.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
/*
* This timeout definition is a worst-case ultra defensive measure against
@@ -289,6 +291,37 @@ static int davinci_mdio_write(struct mii_bus *bus, int phy_id,
return 0;
}
+#ifdef CONFIG_OF
+static const struct of_device_id davinci_mdio_dt_ids[] = {
+ { .compatible = "ti,davinci-mdio" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, davinci_mdio_dt_ids);
+
+static inline int davinci_mdio_probe_dt(struct device *dev,
+ struct mdio_platform_data *pdata)
+{
+ struct device_node *np = dev->of_node;
+ const struct of_device_id *of_id =
+ of_match_device(davinci_mdio_dt_ids, dev);
+ u32 tmp;
+
+ if (!of_id)
+ return 0;
+
+ if (of_property_read_u32(np, "bus-freq", &tmp) == 0)
+ pdata->bus_freq = tmp;
+
+ return 0;
+}
+#else
+static inline int davinci_mdio_probe_dt(struct device *dev,
+ struct mdio_platform_data *pdata)
+{
+ return 0;
+}
+#endif
+
static int __devinit davinci_mdio_probe(struct platform_device *pdev)
{
struct mdio_platform_data *pdata = pdev->dev.platform_data;
@@ -306,6 +339,10 @@ static int __devinit davinci_mdio_probe(struct platform_device *pdev)
data->pdata = pdata ? (*pdata) : default_pdata;
+ ret = davinci_mdio_probe_dt(dev, pdata);
+ if (ret < 0)
+ goto free_mem;
+
data->bus = mdiobus_alloc();
if (!data->bus) {
dev_err(dev, "failed to alloc mii bus\n");
@@ -389,6 +426,7 @@ bail_out:
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
+free_mem:
kfree(data);
return ret;
@@ -471,6 +509,7 @@ static struct platform_driver davinci_mdio_driver = {
.name = "davinci_mdio",
.owner = THIS_MODULE,
.pm = &davinci_mdio_pm_ops,
+ .of_match_table = of_match_ptr(davinci_mdio_dt_ids),
},
.probe = davinci_mdio_probe,
.remove = __devexit_p(davinci_mdio_remove),
--
1.7.11.2
WARNING: multiple messages have this Message-ID (diff)
From: Daniel Mack <zonque@gmail.com>
To: netdev@vger.kernel.org
Cc: devicetree-discuss@lists.ozlabs.org, koen@dominion.thruhere.net,
mugunthanvnm@ti.com, linux-arm-kernel@lists.infradead.org,
paul@pwsan.com, Daniel Mack <zonque@gmail.com>
Subject: [PATCH 2/2] net: davinci_mdio: add DT bindings
Date: Thu, 2 Aug 2012 21:43:36 +0200 [thread overview]
Message-ID: <1343936616-29318-2-git-send-email-zonque@gmail.com> (raw)
In-Reply-To: <1343936616-29318-1-git-send-email-zonque@gmail.com>
Signed-off-by: Daniel Mack <zonque@gmail.com>
---
.../devicetree/bindings/net/davinci_mdio.txt | 24 +++++++++++++
drivers/net/ethernet/ti/davinci_mdio.c | 39 ++++++++++++++++++++++
2 files changed, 63 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/davinci_mdio.txt
diff --git a/Documentation/devicetree/bindings/net/davinci_mdio.txt b/Documentation/devicetree/bindings/net/davinci_mdio.txt
new file mode 100644
index 0000000..03292a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/davinci_mdio.txt
@@ -0,0 +1,24 @@
+Davinci MDIO DT bindings
+
+Required properties:
+
+ - compatible : should be "ti,davinci-mdio"
+
+Optional properties:
+
+ - bus-freq : an integer to specify the bus speed
+
+Examples:
+
+ mdio: davinci_mdio@4a101000 {
+ compatible = "ti,davinci-mdio";
+ ti,hwmods = "davinci_mdio";
+ };
+
+ or
+
+ mdio: davinci_mdio@4a101000 {
+ compatible = "ti,davinci-mdio";
+ reg = <0x4a101000 0x100>;
+ };
+
diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c
index b4b6015..2640cae 100644
--- a/drivers/net/ethernet/ti/davinci_mdio.c
+++ b/drivers/net/ethernet/ti/davinci_mdio.c
@@ -36,6 +36,8 @@
#include <linux/io.h>
#include <linux/pm_runtime.h>
#include <linux/davinci_emac.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
/*
* This timeout definition is a worst-case ultra defensive measure against
@@ -289,6 +291,37 @@ static int davinci_mdio_write(struct mii_bus *bus, int phy_id,
return 0;
}
+#ifdef CONFIG_OF
+static const struct of_device_id davinci_mdio_dt_ids[] = {
+ { .compatible = "ti,davinci-mdio" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, davinci_mdio_dt_ids);
+
+static inline int davinci_mdio_probe_dt(struct device *dev,
+ struct mdio_platform_data *pdata)
+{
+ struct device_node *np = dev->of_node;
+ const struct of_device_id *of_id =
+ of_match_device(davinci_mdio_dt_ids, dev);
+ u32 tmp;
+
+ if (!of_id)
+ return 0;
+
+ if (of_property_read_u32(np, "bus-freq", &tmp) == 0)
+ pdata->bus_freq = tmp;
+
+ return 0;
+}
+#else
+static inline int davinci_mdio_probe_dt(struct device *dev,
+ struct mdio_platform_data *pdata)
+{
+ return 0;
+}
+#endif
+
static int __devinit davinci_mdio_probe(struct platform_device *pdev)
{
struct mdio_platform_data *pdata = pdev->dev.platform_data;
@@ -306,6 +339,10 @@ static int __devinit davinci_mdio_probe(struct platform_device *pdev)
data->pdata = pdata ? (*pdata) : default_pdata;
+ ret = davinci_mdio_probe_dt(dev, pdata);
+ if (ret < 0)
+ goto free_mem;
+
data->bus = mdiobus_alloc();
if (!data->bus) {
dev_err(dev, "failed to alloc mii bus\n");
@@ -389,6 +426,7 @@ bail_out:
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
+free_mem:
kfree(data);
return ret;
@@ -471,6 +509,7 @@ static struct platform_driver davinci_mdio_driver = {
.name = "davinci_mdio",
.owner = THIS_MODULE,
.pm = &davinci_mdio_pm_ops,
+ .of_match_table = of_match_ptr(davinci_mdio_dt_ids),
},
.probe = davinci_mdio_probe,
.remove = __devexit_p(davinci_mdio_remove),
--
1.7.11.2
next prev parent reply other threads:[~2012-08-02 19:43 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-02 19:43 [PATCH 1/2] net: davinci_mdio: enable and disable clock Daniel Mack
2012-08-02 19:43 ` Daniel Mack
2012-08-02 19:43 ` Daniel Mack [this message]
2012-08-02 19:43 ` [PATCH 2/2] net: davinci_mdio: add DT bindings Daniel Mack
2012-08-02 19:53 ` [PATCH 1/2] net: davinci_mdio: enable and disable clock Russell King - ARM Linux
2012-08-02 19:53 ` Russell King - ARM Linux
2012-08-02 20:17 ` Daniel Mack
2012-08-02 20:17 ` Daniel Mack
2012-08-02 20:20 ` Paul Walmsley
2012-08-02 20:20 ` Paul Walmsley
2012-08-02 20:28 ` Daniel Mack
2012-08-02 20:28 ` Daniel Mack
2012-08-03 5:16 ` Vaibhav Hiremath
2012-08-03 5:16 ` Vaibhav Hiremath
2012-08-03 5:16 ` Vaibhav Hiremath
2012-08-03 5:22 ` Daniel Mack
2012-08-03 5:22 ` Daniel Mack
2012-08-03 5:53 ` Hiremath, Vaibhav
2012-08-03 5:53 ` Hiremath, Vaibhav
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1343936616-29318-2-git-send-email-zonque@gmail.com \
--to=zonque@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.