From: Axel Lin <axel.lin@gmail.com>
To: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Liam Girdwood <lrg@ti.com>,
linux-kernel@vger.kernel.org, Yong Shen <yong.shen@linaro.org>,
Fabio Estevam <fabio.estevam@freescale.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Arnaud Patard <arnaud.patard@rtp-net.org>
Subject: [PATCH 6/6] regulator: mc13xxx: Remove get_voltage implementation for single voltage regulators
Date: Fri, 10 Aug 2012 09:38:39 +0800 [thread overview]
Message-ID: <1344562719.2996.7.camel@phoenix> (raw)
In-Reply-To: <1344562353.2996.1.camel@phoenix>
This is not required after commit f7df20ec
"regulator: core: Use list_voltage() to read single voltage regulators"
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/regulator/mc13783-regulator.c | 1 -
drivers/regulator/mc13892-regulator.c | 1 -
drivers/regulator/mc13xxx-regulator-core.c | 11 -----------
drivers/regulator/mc13xxx.h | 1 -
4 files changed, 14 deletions(-)
diff --git a/drivers/regulator/mc13783-regulator.c b/drivers/regulator/mc13783-regulator.c
index 2587ea1..4977b19 100644
--- a/drivers/regulator/mc13783-regulator.c
+++ b/drivers/regulator/mc13783-regulator.c
@@ -324,7 +324,6 @@ static struct regulator_ops mc13783_gpo_regulator_ops = {
.is_enabled = mc13783_gpo_regulator_is_enabled,
.list_voltage = regulator_list_voltage_table,
.set_voltage = mc13xxx_fixed_regulator_set_voltage,
- .get_voltage = mc13xxx_fixed_regulator_get_voltage,
};
static int __devinit mc13783_regulator_probe(struct platform_device *pdev)
diff --git a/drivers/regulator/mc13892-regulator.c b/drivers/regulator/mc13892-regulator.c
index 09265f0..1fa6381 100644
--- a/drivers/regulator/mc13892-regulator.c
+++ b/drivers/regulator/mc13892-regulator.c
@@ -390,7 +390,6 @@ static struct regulator_ops mc13892_gpo_regulator_ops = {
.is_enabled = mc13892_gpo_regulator_is_enabled,
.list_voltage = regulator_list_voltage_table,
.set_voltage = mc13xxx_fixed_regulator_set_voltage,
- .get_voltage = mc13xxx_fixed_regulator_get_voltage,
};
static int mc13892_sw_regulator_get_voltage_sel(struct regulator_dev *rdev)
diff --git a/drivers/regulator/mc13xxx-regulator-core.c b/drivers/regulator/mc13xxx-regulator-core.c
index 8151889..88cbb83 100644
--- a/drivers/regulator/mc13xxx-regulator-core.c
+++ b/drivers/regulator/mc13xxx-regulator-core.c
@@ -152,23 +152,12 @@ int mc13xxx_fixed_regulator_set_voltage(struct regulator_dev *rdev, int min_uV,
}
EXPORT_SYMBOL_GPL(mc13xxx_fixed_regulator_set_voltage);
-int mc13xxx_fixed_regulator_get_voltage(struct regulator_dev *rdev)
-{
- int id = rdev_get_id(rdev);
-
- dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id);
-
- return rdev->desc->volt_table[0];
-}
-EXPORT_SYMBOL_GPL(mc13xxx_fixed_regulator_get_voltage);
-
struct regulator_ops mc13xxx_fixed_regulator_ops = {
.enable = mc13xxx_regulator_enable,
.disable = mc13xxx_regulator_disable,
.is_enabled = mc13xxx_regulator_is_enabled,
.list_voltage = regulator_list_voltage_table,
.set_voltage = mc13xxx_fixed_regulator_set_voltage,
- .get_voltage = mc13xxx_fixed_regulator_get_voltage,
};
EXPORT_SYMBOL_GPL(mc13xxx_fixed_regulator_ops);
diff --git a/drivers/regulator/mc13xxx.h b/drivers/regulator/mc13xxx.h
index eaff551..06c8903 100644
--- a/drivers/regulator/mc13xxx.h
+++ b/drivers/regulator/mc13xxx.h
@@ -34,7 +34,6 @@ struct mc13xxx_regulator_priv {
extern int mc13xxx_fixed_regulator_set_voltage(struct regulator_dev *rdev,
int min_uV, int max_uV, unsigned *selector);
-extern int mc13xxx_fixed_regulator_get_voltage(struct regulator_dev *rdev);
#ifdef CONFIG_OF
extern int mc13xxx_get_num_regulators_dt(struct platform_device *pdev);
--
1.7.9.5
next prev parent reply other threads:[~2012-08-10 1:38 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-10 1:32 [PATCH 1/6] regulator: core: Add checking n_voltages if using list_voltage() to read voltage regulators Axel Lin
2012-08-10 1:33 ` [PATCH 2/6] regulator: ab3100: Remove get_voltage implementation for regulator_ops_fixed Axel Lin
2012-08-13 12:31 ` Mark Brown
2012-08-10 1:34 ` [PATCH 3/6] regulator: ab8500: Remove get_voltage implementation for ab8500_regulator_fixed_ops Axel Lin
2012-08-10 1:35 ` [PATCH 4/6] regulator: isl6271a: Remove get_voltage implementation for isl_fixed_ops Axel Lin
2012-08-10 1:37 ` [PATCH 5/6] regulator: twl: Remove get_voltage implementation for single voltage regulators Axel Lin
2012-08-10 1:38 ` Axel Lin [this message]
2012-08-10 10:05 ` [PATCH 1/6] regulator: core: Add checking n_voltages if using list_voltage() to read " Mark Brown
2012-08-10 12:27 ` Axel Lin
2012-08-10 12:29 ` Mark Brown
2012-08-11 2:22 ` Axel Lin
2012-08-13 12:30 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1344562719.2996.7.camel@phoenix \
--to=axel.lin@gmail.com \
--cc=arnaud.patard@rtp-net.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=fabio.estevam@freescale.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
--cc=s.hauer@pengutronix.de \
--cc=yong.shen@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.