From: Gertjan van Wingerde <gwingerde@gmail.com>
To: <linux-wireless@vger.kernel.org>,
"John W. Linville" <linville@tuxdriver.com>
Cc: <users@rt2x00.serialmonkey.com>,
Ivo van Doorn <IvDoorn@gmail.com>,
Helmut Schaa <helmut.schaa@googlemail.com>,
Gertjan van Wingerde <gwingerde@gmail.com>,
<stable@vger.kernel.org>
Subject: [PATCH 02/14] rt2x00: Align rt2400pci GPIOCSR definition with datasheet.
Date: Thu, 30 Aug 2012 21:34:01 +0200 [thread overview]
Message-ID: <1346355248-5331-3-git-send-email-gwingerde@gmail.com> (raw)
In-Reply-To: <1346355248-5331-2-git-send-email-gwingerde@gmail.com>
Datasheet indicates additional fields to set the GPIO direction.
At the same time rename GPIOCSR_BIT<x> to GPIOCSR_VAL<x> to represent the
actual meaning better.
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Cc: <stable@vger.kernel.org>
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 8b9dbd7..94f9aa2 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -205,7 +205,7 @@ static int rt2400pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
u32 reg;
rt2x00pci_register_read(rt2x00dev, GPIOCSR, ®);
- return rt2x00_get_field32(reg, GPIOCSR_BIT0);
+ return rt2x00_get_field32(reg, GPIOCSR_VAL0);
}
#ifdef CONFIG_RT2X00_LIB_LEDS
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h
index d3a4a68..e4b07f0 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.h
+++ b/drivers/net/wireless/rt2x00/rt2400pci.h
@@ -660,16 +660,26 @@
/*
* GPIOCSR: GPIO control register.
+ * GPIOCSR_VALx: Actual GPIO pin x value
+ * GPIOCSR_DIRx: GPIO direction: 0 = output; 1 = input
*/
#define GPIOCSR 0x0120
-#define GPIOCSR_BIT0 FIELD32(0x00000001)
-#define GPIOCSR_BIT1 FIELD32(0x00000002)
-#define GPIOCSR_BIT2 FIELD32(0x00000004)
-#define GPIOCSR_BIT3 FIELD32(0x00000008)
-#define GPIOCSR_BIT4 FIELD32(0x00000010)
-#define GPIOCSR_BIT5 FIELD32(0x00000020)
-#define GPIOCSR_BIT6 FIELD32(0x00000040)
-#define GPIOCSR_BIT7 FIELD32(0x00000080)
+#define GPIOCSR_VAL0 FIELD32(0x00000001)
+#define GPIOCSR_VAL1 FIELD32(0x00000002)
+#define GPIOCSR_VAL2 FIELD32(0x00000004)
+#define GPIOCSR_VAL3 FIELD32(0x00000008)
+#define GPIOCSR_VAL4 FIELD32(0x00000010)
+#define GPIOCSR_VAL5 FIELD32(0x00000020)
+#define GPIOCSR_VAL6 FIELD32(0x00000040)
+#define GPIOCSR_VAL7 FIELD32(0x00000080)
+#define GPIOCSR_DIR0 FIELD32(0x00000100)
+#define GPIOCSR_DIR1 FIELD32(0x00000200)
+#define GPIOCSR_DIR2 FIELD32(0x00000400)
+#define GPIOCSR_DIR3 FIELD32(0x00000800)
+#define GPIOCSR_DIR4 FIELD32(0x00001000)
+#define GPIOCSR_DIR5 FIELD32(0x00002000)
+#define GPIOCSR_DIR6 FIELD32(0x00004000)
+#define GPIOCSR_DIR7 FIELD32(0x00008000)
/*
* BBPPCSR: BBP Pin control register.
--
1.7.11.1
next prev parent reply other threads:[~2012-08-30 19:40 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-30 19:33 [PATCH 00/14] rt2x00: Fixes and cleanups Gertjan van Wingerde
2012-08-30 19:34 ` [PATCH 01/14] rt2x00: Identify ASUS USB-N53 device Gertjan van Wingerde
2012-08-30 19:34 ` Gertjan van Wingerde [this message]
2012-08-30 19:34 ` [PATCH 03/14] rt2x00: Fix rt2400pci rfkill polling prior to interface start Gertjan van Wingerde
2012-08-30 19:34 ` [PATCH 04/14] rt2x00: Align rt2500pci GPIOCSR definition with datasheet Gertjan van Wingerde
2012-08-30 19:34 ` [PATCH 05/14] rt2x00: Fix rt2500pci rfkill polling prior to interface start Gertjan van Wingerde
2012-08-30 19:34 ` [PATCH 06/14] rt2x00: Align rt2500usb MAC_CSR19 definition with datasheet Gertjan van Wingerde
2012-08-30 19:34 ` [PATCH 07/14] rt2x00: Fix rt2500usb rfkill polling prior to interface start Gertjan van Wingerde
2012-08-30 19:34 ` [PATCH 08/14] rt2x00: Align rt61pci MAC_CSR13 definition with datasheet Gertjan van Wingerde
2012-08-30 19:34 ` [PATCH 09/14] rt2x00: Fix rt61pci rfkill polling prior to interface start Gertjan van Wingerde
2012-08-30 21:04 ` [PATCH 10/14] rt2x00: Align rt73usb MAC_CSR13 definition with datasheet Gertjan van Wingerde
2012-08-30 21:04 ` [PATCH 10/17] rt2x00: Fix rt2500usb rfkill polling prior to interface start Gertjan van Wingerde
2012-08-30 21:04 ` [PATCH 11/17] rt2x00: Align rt61pci MAC_CSR13 definition with datasheet Gertjan van Wingerde
2012-08-30 21:04 ` [PATCH 11/14] rt2x00: Fix rt73usb rfkill polling prior to interface start Gertjan van Wingerde
2012-08-30 21:04 ` [PATCH 12/14] rt2x00: Align rt2800 GPIO_CTRL definition with datasheet Gertjan van Wingerde
2012-08-30 21:04 ` [PATCH 12/17] rt2x00: Fix rt61pci rfkill polling prior to interface start Gertjan van Wingerde
2012-08-30 21:04 ` [PATCH 13/17] rt2x00: Align rt73usb MAC_CSR13 definition with datasheet Gertjan van Wingerde
2012-08-30 21:04 ` [PATCH 13/14] rt2x00: Fix rt2800 rfkill polling prior to interface start Gertjan van Wingerde
2012-08-30 21:04 ` [PATCH 14/17] rt2x00: Fix rt73usb " Gertjan van Wingerde
2012-08-30 21:04 ` [PATCH 14/14] rt2x00: rt2800 - Make probe_hw function common between PCI and USB Gertjan van Wingerde
2012-08-30 21:04 ` [PATCH 15/17] rt2x00: Align rt2800 GPIO_CTRL definition with datasheet Gertjan van Wingerde
2012-08-30 21:04 ` [PATCH 16/17] rt2x00: Fix rt2800 rfkill polling prior to interface start Gertjan van Wingerde
2012-08-30 21:04 ` [PATCH 17/17] rt2x00: rt2800 - Make probe_hw function common between PCI and USB Gertjan van Wingerde
2012-08-30 21:14 ` [PATCH 10/17] rt2x00: Fix rt2500usb rfkill polling prior to interface start Gertjan van Wingerde
2012-08-30 21:06 ` [PATCH 04/14] rt2x00: Align rt2500pci GPIOCSR definition with datasheet Jonathan Nieder
2012-08-30 21:05 ` [PATCH 02/14] rt2x00: Align rt2400pci " Jonathan Nieder
2012-08-30 21:08 ` Gertjan van Wingerde
2012-08-31 2:21 ` Jonathan Nieder
2012-08-31 11:14 ` Gertjan van Wingerde
2012-08-31 20:59 ` Jonathan Nieder
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1346355248-5331-3-git-send-email-gwingerde@gmail.com \
--to=gwingerde@gmail.com \
--cc=IvDoorn@gmail.com \
--cc=helmut.schaa@googlemail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=stable@vger.kernel.org \
--cc=users@rt2x00.serialmonkey.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.