From: Gertjan van Wingerde <gwingerde@gmail.com>
To: <linux-wireless@vger.kernel.org>,
"John W. Linville" <linville@tuxdriver.com>
Cc: <users@rt2x00.serialmonkey.com>,
Ivo van Doorn <IvDoorn@gmail.com>,
Helmut Schaa <helmut.schaa@googlemail.com>,
Gertjan van Wingerde <gwingerde@gmail.com>,
<stable@vger.kernel.org>
Subject: [PATCH 08/14] rt2x00: Align rt61pci MAC_CSR13 definition with datasheet.
Date: Thu, 30 Aug 2012 21:34:07 +0200 [thread overview]
Message-ID: <1346355248-5331-9-git-send-email-gwingerde@gmail.com> (raw)
In-Reply-To: <1346355248-5331-8-git-send-email-gwingerde@gmail.com>
Rename MAC_CSR13_BIT<x> to MAC_CSR13_VAL<x> and MAC_CSR13_DIR<x> to
represent the actual meaning better.
Clean up list to only mention the active GPIO pins, not just all bits.
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Cc: <stable@vger.kernel.org>
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 3f7bc5c..d84b17f 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -243,7 +243,7 @@ static int rt61pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
u32 reg;
rt2x00pci_register_read(rt2x00dev, MAC_CSR13, ®);
- return rt2x00_get_field32(reg, MAC_CSR13_BIT5);
+ return rt2x00_get_field32(reg, MAC_CSR13_VAL5);
}
#ifdef CONFIG_RT2X00_LIB_LEDS
@@ -715,11 +715,11 @@ static void rt61pci_config_antenna_2529_rx(struct rt2x00_dev *rt2x00dev,
rt2x00pci_register_read(rt2x00dev, MAC_CSR13, ®);
- rt2x00_set_field32(®, MAC_CSR13_BIT4, p1);
- rt2x00_set_field32(®, MAC_CSR13_BIT12, 0);
+ rt2x00_set_field32(®, MAC_CSR13_DIR4, 0);
+ rt2x00_set_field32(®, MAC_CSR13_VAL4, p1);
- rt2x00_set_field32(®, MAC_CSR13_BIT3, !p2);
- rt2x00_set_field32(®, MAC_CSR13_BIT11, 0);
+ rt2x00_set_field32(®, MAC_CSR13_DIR3, 0);
+ rt2x00_set_field32(®, MAC_CSR13_VAL3, !p2);
rt2x00pci_register_write(rt2x00dev, MAC_CSR13, reg);
}
diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h
index e3cd6db..9bc6b60 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.h
+++ b/drivers/net/wireless/rt2x00/rt61pci.h
@@ -357,21 +357,22 @@ struct hw_pairwise_ta_entry {
/*
* MAC_CSR13: GPIO.
+ * MAC_CSR13_VALx: GPIO value
+ * MAC_CSR13_DIRx: GPIO direction: 0 = output; 1 = input
*/
#define MAC_CSR13 0x3034
-#define MAC_CSR13_BIT0 FIELD32(0x00000001)
-#define MAC_CSR13_BIT1 FIELD32(0x00000002)
-#define MAC_CSR13_BIT2 FIELD32(0x00000004)
-#define MAC_CSR13_BIT3 FIELD32(0x00000008)
-#define MAC_CSR13_BIT4 FIELD32(0x00000010)
-#define MAC_CSR13_BIT5 FIELD32(0x00000020)
-#define MAC_CSR13_BIT6 FIELD32(0x00000040)
-#define MAC_CSR13_BIT7 FIELD32(0x00000080)
-#define MAC_CSR13_BIT8 FIELD32(0x00000100)
-#define MAC_CSR13_BIT9 FIELD32(0x00000200)
-#define MAC_CSR13_BIT10 FIELD32(0x00000400)
-#define MAC_CSR13_BIT11 FIELD32(0x00000800)
-#define MAC_CSR13_BIT12 FIELD32(0x00001000)
+#define MAC_CSR13_VAL0 FIELD32(0x00000001)
+#define MAC_CSR13_VAL1 FIELD32(0x00000002)
+#define MAC_CSR13_VAL2 FIELD32(0x00000004)
+#define MAC_CSR13_VAL3 FIELD32(0x00000008)
+#define MAC_CSR13_VAL4 FIELD32(0x00000010)
+#define MAC_CSR13_VAL5 FIELD32(0x00000020)
+#define MAC_CSR13_DIR0 FIELD32(0x00000100)
+#define MAC_CSR13_DIR1 FIELD32(0x00000200)
+#define MAC_CSR13_DIR2 FIELD32(0x00000400)
+#define MAC_CSR13_DIR3 FIELD32(0x00000800)
+#define MAC_CSR13_DIR4 FIELD32(0x00001000)
+#define MAC_CSR13_DIR5 FIELD32(0x00002000)
/*
* MAC_CSR14: LED control register.
--
1.7.11.1
next prev parent reply other threads:[~2012-08-30 19:40 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-30 19:33 [PATCH 00/14] rt2x00: Fixes and cleanups Gertjan van Wingerde
2012-08-30 19:34 ` [PATCH 01/14] rt2x00: Identify ASUS USB-N53 device Gertjan van Wingerde
2012-08-30 19:34 ` [PATCH 02/14] rt2x00: Align rt2400pci GPIOCSR definition with datasheet Gertjan van Wingerde
2012-08-30 19:34 ` [PATCH 03/14] rt2x00: Fix rt2400pci rfkill polling prior to interface start Gertjan van Wingerde
2012-08-30 19:34 ` [PATCH 04/14] rt2x00: Align rt2500pci GPIOCSR definition with datasheet Gertjan van Wingerde
2012-08-30 19:34 ` [PATCH 05/14] rt2x00: Fix rt2500pci rfkill polling prior to interface start Gertjan van Wingerde
2012-08-30 19:34 ` [PATCH 06/14] rt2x00: Align rt2500usb MAC_CSR19 definition with datasheet Gertjan van Wingerde
2012-08-30 19:34 ` [PATCH 07/14] rt2x00: Fix rt2500usb rfkill polling prior to interface start Gertjan van Wingerde
2012-08-30 19:34 ` Gertjan van Wingerde [this message]
2012-08-30 19:34 ` [PATCH 09/14] rt2x00: Fix rt61pci " Gertjan van Wingerde
2012-08-30 21:04 ` [PATCH 10/14] rt2x00: Align rt73usb MAC_CSR13 definition with datasheet Gertjan van Wingerde
2012-08-30 21:04 ` [PATCH 10/17] rt2x00: Fix rt2500usb rfkill polling prior to interface start Gertjan van Wingerde
2012-08-30 21:04 ` [PATCH 11/17] rt2x00: Align rt61pci MAC_CSR13 definition with datasheet Gertjan van Wingerde
2012-08-30 21:04 ` [PATCH 11/14] rt2x00: Fix rt73usb rfkill polling prior to interface start Gertjan van Wingerde
2012-08-30 21:04 ` [PATCH 12/14] rt2x00: Align rt2800 GPIO_CTRL definition with datasheet Gertjan van Wingerde
2012-08-30 21:04 ` [PATCH 12/17] rt2x00: Fix rt61pci rfkill polling prior to interface start Gertjan van Wingerde
2012-08-30 21:04 ` [PATCH 13/17] rt2x00: Align rt73usb MAC_CSR13 definition with datasheet Gertjan van Wingerde
2012-08-30 21:04 ` [PATCH 13/14] rt2x00: Fix rt2800 rfkill polling prior to interface start Gertjan van Wingerde
2012-08-30 21:04 ` [PATCH 14/17] rt2x00: Fix rt73usb " Gertjan van Wingerde
2012-08-30 21:04 ` [PATCH 14/14] rt2x00: rt2800 - Make probe_hw function common between PCI and USB Gertjan van Wingerde
2012-08-30 21:04 ` [PATCH 15/17] rt2x00: Align rt2800 GPIO_CTRL definition with datasheet Gertjan van Wingerde
2012-08-30 21:04 ` [PATCH 16/17] rt2x00: Fix rt2800 rfkill polling prior to interface start Gertjan van Wingerde
2012-08-30 21:04 ` [PATCH 17/17] rt2x00: rt2800 - Make probe_hw function common between PCI and USB Gertjan van Wingerde
2012-08-30 21:14 ` [PATCH 10/17] rt2x00: Fix rt2500usb rfkill polling prior to interface start Gertjan van Wingerde
2012-08-30 21:06 ` [PATCH 04/14] rt2x00: Align rt2500pci GPIOCSR definition with datasheet Jonathan Nieder
2012-08-30 21:05 ` [PATCH 02/14] rt2x00: Align rt2400pci " Jonathan Nieder
2012-08-30 21:08 ` Gertjan van Wingerde
2012-08-31 2:21 ` Jonathan Nieder
2012-08-31 11:14 ` Gertjan van Wingerde
2012-08-31 20:59 ` Jonathan Nieder
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1346355248-5331-9-git-send-email-gwingerde@gmail.com \
--to=gwingerde@gmail.com \
--cc=IvDoorn@gmail.com \
--cc=helmut.schaa@googlemail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=stable@vger.kernel.org \
--cc=users@rt2x00.serialmonkey.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.