From: "Michel Dänzer" <michel@daenzer.net>
To: Meelis Roos <mroos@linux.ee>
Cc: sparclinux@vger.kernel.org, dri-devel@lists.freedesktop.org
Subject: Re: PCI Radeon RV100 detection hang on sparc64
Date: Thu, 06 Sep 2012 16:55:51 +0000 [thread overview]
Message-ID: <1346950551.30263.196.camel@thor.local> (raw)
In-Reply-To: <alpine.SOC.1.00.1209061032360.371@math.ut.ee>
On Don, 2012-09-06 at 17:41 +0300, Meelis Roos wrote:
> This is with initialyy unmodified 3.6.0-rc4-00101-g0809095 kernel in
> Ultra 10 (clean, without my "Video RAM" hack that I talked in other
> sparclinux posts). When I saw that Sun XVR-100 was detected fine by the
> kernel, I compiled radeon drm driver with modesetting enabled and tried
> it:
>
> [drm] radeon defaulting to kernel modesetting.
> [drm] radeon kernel modesetting enabled.
> PCI: Enabling device: (0000:02:02.0), cmd 82
> [drm] initializing kernel modesetting (RV100 0x1002:0x5159 0x1002:0x0908).
> [drm] register mmio base: 0x10000000
> [drm] register mmio size: 32768
> [drm:radeon_device_init] *ERROR* Unable to find PCI I/O BAR
>
> And here the machine hangs. Debugging printk-s reveal that it does not
> find any active I/O port resources and then continues into initializing
> the card. Down in igp_read_bios_from_vram() it successfully ioremaps
> memory region 0 (vram_base\x1ff08000000 and size@000) and tries to read
> 2 bytes from there and hangs on reading bios[0].
Is the card initialized by OpenFirmware? E.g., does it display anything
before the kernel boots?
> With radeon.modeset=0, it boots [...]
Does X work with DRI enabled then?
--
Earthling Michel Dänzer | http://www.amd.com
Libre software enthusiast | Debian, X and DRI developer
WARNING: multiple messages have this Message-ID (diff)
From: "Michel Dänzer" <michel@daenzer.net>
To: Meelis Roos <mroos@linux.ee>
Cc: sparclinux@vger.kernel.org, dri-devel@lists.freedesktop.org
Subject: Re: PCI Radeon RV100 detection hang on sparc64
Date: Thu, 06 Sep 2012 18:55:51 +0200 [thread overview]
Message-ID: <1346950551.30263.196.camel@thor.local> (raw)
In-Reply-To: <alpine.SOC.1.00.1209061032360.371@math.ut.ee>
On Don, 2012-09-06 at 17:41 +0300, Meelis Roos wrote:
> This is with initialyy unmodified 3.6.0-rc4-00101-g0809095 kernel in
> Ultra 10 (clean, without my "Video RAM" hack that I talked in other
> sparclinux posts). When I saw that Sun XVR-100 was detected fine by the
> kernel, I compiled radeon drm driver with modesetting enabled and tried
> it:
>
> [drm] radeon defaulting to kernel modesetting.
> [drm] radeon kernel modesetting enabled.
> PCI: Enabling device: (0000:02:02.0), cmd 82
> [drm] initializing kernel modesetting (RV100 0x1002:0x5159 0x1002:0x0908).
> [drm] register mmio base: 0x10000000
> [drm] register mmio size: 32768
> [drm:radeon_device_init] *ERROR* Unable to find PCI I/O BAR
>
> And here the machine hangs. Debugging printk-s reveal that it does not
> find any active I/O port resources and then continues into initializing
> the card. Down in igp_read_bios_from_vram() it successfully ioremaps
> memory region 0 (vram_base=1ff08000000 and size=40000) and tries to read
> 2 bytes from there and hangs on reading bios[0].
Is the card initialized by OpenFirmware? E.g., does it display anything
before the kernel boots?
> With radeon.modeset=0, it boots [...]
Does X work with DRI enabled then?
--
Earthling Michel Dänzer | http://www.amd.com
Libre software enthusiast | Debian, X and DRI developer
next prev parent reply other threads:[~2012-09-06 16:55 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-06 14:41 PCI Radeon RV100 detection hang on sparc64 Meelis Roos
2012-09-06 14:41 ` Meelis Roos
2012-09-06 16:51 ` Adam Jackson
2012-09-06 16:51 ` Adam Jackson
2012-09-06 18:15 ` David Miller
2012-09-06 18:15 ` David Miller
2012-09-06 16:55 ` Michel Dänzer [this message]
2012-09-06 16:55 ` Michel Dänzer
2012-09-06 18:18 ` David Miller
2012-09-06 18:18 ` David Miller
2012-09-07 7:18 ` Dave Airlie
2012-09-07 7:18 ` Dave Airlie
2012-09-19 7:51 ` mroos
2012-09-19 7:51 ` mroos
2013-09-23 13:48 ` mroos
2013-09-23 13:48 ` mroos
2013-09-23 19:06 ` Kjetil Oftedal
2013-09-23 19:06 ` Kjetil Oftedal
2013-09-23 20:36 ` David Miller
2013-09-23 20:36 ` David Miller
2013-09-23 21:14 ` mroos
2013-09-23 21:14 ` mroos
2013-09-23 21:33 ` David Miller
2013-09-23 21:33 ` David Miller
2013-09-24 11:06 ` Meelis Roos
2013-09-24 11:06 ` Meelis Roos
2013-09-25 23:26 ` Meelis Roos
2013-09-25 23:26 ` Meelis Roos
2013-10-01 8:43 ` Meelis Roos
2013-10-01 8:43 ` Meelis Roos
2014-04-04 20:52 ` David Miller
2014-04-04 20:52 ` David Miller
2014-08-13 6:30 ` David Miller
2014-08-13 6:30 ` David Miller
2014-08-19 11:17 ` Meelis Roos
2014-08-19 11:17 ` Meelis Roos
2014-08-25 14:48 ` Meelis Roos
2014-08-25 14:48 ` Meelis Roos
2014-08-26 2:46 ` Michel Dänzer
2014-08-26 2:46 ` Michel Dänzer
2014-08-26 7:07 ` Meelis Roos
2014-08-26 7:07 ` Meelis Roos
2014-08-27 2:24 ` Michel Dänzer
2014-08-27 2:24 ` Michel Dänzer
2014-08-30 19:20 ` Kjetil Oftedal
2014-08-30 19:20 ` Kjetil Oftedal
2014-08-31 5:59 ` Meelis Roos
2014-08-31 5:59 ` Meelis Roos
2013-09-23 21:18 ` Meelis Roos
2013-09-23 21:18 ` Meelis Roos
2013-10-10 11:51 ` [PATCH] only try to find radeon IGP ROM on X86 Meelis Roos
2013-10-10 11:51 ` Meelis Roos
2013-10-10 14:38 ` Alex Deucher
2013-10-10 14:38 ` Alex Deucher
2013-10-10 15:26 ` Meelis Roos
2013-10-10 15:26 ` Meelis Roos
2013-10-10 17:02 ` David Miller
2013-10-10 17:02 ` David Miller
2013-10-10 17:10 ` Alex Deucher
2013-10-10 17:10 ` Alex Deucher
2012-09-06 18:08 ` PCI Radeon RV100 detection hang on sparc64 David Miller
2012-09-06 18:08 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1346950551.30263.196.camel@thor.local \
--to=michel@daenzer.net \
--cc=dri-devel@lists.freedesktop.org \
--cc=mroos@linux.ee \
--cc=sparclinux@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.