From: Avi Kivity <avi@redhat.com>
To: Marcelo Tosatti <mtosatti@redhat.com>
Cc: kvm@vger.kernel.org, Andi Kleen <ak@linux.intel.com>
Subject: [PATCH 2/3] KVM: VMX: Make use of asm.h
Date: Sun, 16 Sep 2012 15:10:58 +0300 [thread overview]
Message-ID: <1347797459-7183-3-git-send-email-avi@redhat.com> (raw)
In-Reply-To: <1347797459-7183-1-git-send-email-avi@redhat.com>
Use macros for bitness-insensitive register names, instead of
rolling our own.
Signed-off-by: Avi Kivity <avi@redhat.com>
---
arch/x86/kvm/vmx.c | 69 ++++++++++++++++++++++++------------------------------
1 file changed, 30 insertions(+), 39 deletions(-)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 5faf12a..30bcb95 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -6184,14 +6184,6 @@ static void atomic_switch_perf_msrs(struct vcpu_vmx *vmx)
msrs[i].host);
}
-#ifdef CONFIG_X86_64
-#define R "r"
-#define Q "q"
-#else
-#define R "e"
-#define Q "l"
-#endif
-
static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu)
{
struct vcpu_vmx *vmx = to_vmx(vcpu);
@@ -6240,30 +6232,30 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu)
vmx->__launched = vmx->loaded_vmcs->launched;
asm(
/* Store host registers */
- "push %%"R"dx; push %%"R"bp;"
- "push %%"R"cx \n\t" /* placeholder for guest rcx */
- "push %%"R"cx \n\t"
- "cmp %%"R"sp, %c[host_rsp](%0) \n\t"
+ "push %%" _ASM_DX "; push %%" _ASM_BP ";"
+ "push %%" _ASM_CX " \n\t" /* placeholder for guest rcx */
+ "push %%" _ASM_CX " \n\t"
+ "cmp %%" _ASM_SP ", %c[host_rsp](%0) \n\t"
"je 1f \n\t"
- "mov %%"R"sp, %c[host_rsp](%0) \n\t"
+ "mov %%" _ASM_SP ", %c[host_rsp](%0) \n\t"
__ex(ASM_VMX_VMWRITE_RSP_RDX) "\n\t"
"1: \n\t"
/* Reload cr2 if changed */
- "mov %c[cr2](%0), %%"R"ax \n\t"
- "mov %%cr2, %%"R"dx \n\t"
- "cmp %%"R"ax, %%"R"dx \n\t"
+ "mov %c[cr2](%0), %%" _ASM_AX " \n\t"
+ "mov %%cr2, %%" _ASM_DX " \n\t"
+ "cmp %%" _ASM_AX ", %%" _ASM_DX " \n\t"
"je 2f \n\t"
- "mov %%"R"ax, %%cr2 \n\t"
+ "mov %%" _ASM_AX", %%cr2 \n\t"
"2: \n\t"
/* Check if vmlaunch of vmresume is needed */
"cmpl $0, %c[launched](%0) \n\t"
/* Load guest registers. Don't clobber flags. */
- "mov %c[rax](%0), %%"R"ax \n\t"
- "mov %c[rbx](%0), %%"R"bx \n\t"
- "mov %c[rdx](%0), %%"R"dx \n\t"
- "mov %c[rsi](%0), %%"R"si \n\t"
- "mov %c[rdi](%0), %%"R"di \n\t"
- "mov %c[rbp](%0), %%"R"bp \n\t"
+ "mov %c[rax](%0), %%" _ASM_AX " \n\t"
+ "mov %c[rbx](%0), %%" _ASM_BX " \n\t"
+ "mov %c[rdx](%0), %%" _ASM_DX " \n\t"
+ "mov %c[rsi](%0), %%" _ASM_SI " \n\t"
+ "mov %c[rdi](%0), %%" _ASM_DI " \n\t"
+ "mov %c[rbp](%0), %%" _ASM_BP " \n\t"
#ifdef CONFIG_X86_64
"mov %c[r8](%0), %%r8 \n\t"
"mov %c[r9](%0), %%r9 \n\t"
@@ -6274,7 +6266,7 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu)
"mov %c[r14](%0), %%r14 \n\t"
"mov %c[r15](%0), %%r15 \n\t"
#endif
- "mov %c[rcx](%0), %%"R"cx \n\t" /* kills %0 (ecx) */
+ "mov %c[rcx](%0), %%" _ASM_CX " \n\t" /* kills %0 (ecx) */
/* Enter guest mode */
"jne 1f \n\t"
@@ -6283,15 +6275,15 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu)
"1: " __ex(ASM_VMX_VMRESUME) "\n\t"
"2: "
/* Save guest registers, load host registers, keep flags */
- "mov %0, %c[wordsize](%%"R"sp) \n\t"
+ "mov %0, %c[wordsize](%%" _ASM_SP ") \n\t"
"pop %0 \n\t"
- "mov %%"R"ax, %c[rax](%0) \n\t"
- "mov %%"R"bx, %c[rbx](%0) \n\t"
- "pop"Q" %c[rcx](%0) \n\t"
- "mov %%"R"dx, %c[rdx](%0) \n\t"
- "mov %%"R"si, %c[rsi](%0) \n\t"
- "mov %%"R"di, %c[rdi](%0) \n\t"
- "mov %%"R"bp, %c[rbp](%0) \n\t"
+ "mov %%" _ASM_AX ", %c[rax](%0) \n\t"
+ "mov %%" _ASM_BX ", %c[rbx](%0) \n\t"
+ __ASM_SIZE(pop) " %c[rcx](%0) \n\t"
+ "mov %%" _ASM_DX ", %c[rdx](%0) \n\t"
+ "mov %%" _ASM_SI ", %c[rsi](%0) \n\t"
+ "mov %%" _ASM_DI ", %c[rdi](%0) \n\t"
+ "mov %%" _ASM_BP ", %c[rbp](%0) \n\t"
#ifdef CONFIG_X86_64
"mov %%r8, %c[r8](%0) \n\t"
"mov %%r9, %c[r9](%0) \n\t"
@@ -6302,10 +6294,10 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu)
"mov %%r14, %c[r14](%0) \n\t"
"mov %%r15, %c[r15](%0) \n\t"
#endif
- "mov %%cr2, %%"R"ax \n\t"
- "mov %%"R"ax, %c[cr2](%0) \n\t"
+ "mov %%cr2, %%" _ASM_AX " \n\t"
+ "mov %%" _ASM_AX ", %c[cr2](%0) \n\t"
- "pop %%"R"bp; pop %%"R"dx \n\t"
+ "pop %%" _ASM_BP "; pop %%" _ASM_DX " \n\t"
"setbe %c[fail](%0) \n\t"
".pushsection .rodata \n\t"
".global vmx_return \n\t"
@@ -6335,9 +6327,11 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu)
[cr2]"i"(offsetof(struct vcpu_vmx, vcpu.arch.cr2)),
[wordsize]"i"(sizeof(ulong))
: "cc", "memory"
- , R"ax", R"bx", R"di", R"si"
#ifdef CONFIG_X86_64
+ , "rax", "rbx", "rdi", "rsi"
, "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15"
+#else
+ , "eax", "ebx", "edi", "esi"
#endif
);
@@ -6389,9 +6383,6 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu)
vmx_complete_interrupts(vmx);
}
-#undef R
-#undef Q
-
static void vmx_free_vcpu(struct kvm_vcpu *vcpu)
{
struct vcpu_vmx *vmx = to_vmx(vcpu);
--
1.7.12
next prev parent reply other threads:[~2012-09-16 12:11 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-16 12:10 [PATCH 0/3] Prepare kvm for lto Avi Kivity
2012-09-16 12:10 ` [PATCH 1/3] KVM: VMX: Make lto-friendly Avi Kivity
2012-09-16 12:10 ` Avi Kivity [this message]
2012-09-16 12:10 ` [PATCH 3/3] KVM: SVM: Make use of asm.h Avi Kivity
2012-09-17 13:38 ` [PATCH 0/3] Prepare kvm for lto Marcelo Tosatti
-- strict thread matches above, loose matches on Subject: below --
2012-09-12 14:50 Avi Kivity
2012-09-12 14:50 ` [PATCH 2/3] KVM: VMX: Make use of asm.h Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1347797459-7183-3-git-send-email-avi@redhat.com \
--to=avi@redhat.com \
--cc=ak@linux.intel.com \
--cc=kvm@vger.kernel.org \
--cc=mtosatti@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.