From: Avi Kivity <avi@redhat.com>
To: Marcelo Tosatti <mtosatti@redhat.com>
Cc: kvm@vger.kernel.org, Andi Kleen <ak@linux.intel.com>
Subject: [PATCH 3/3] KVM: SVM: Make use of asm.h
Date: Sun, 16 Sep 2012 15:10:59 +0300 [thread overview]
Message-ID: <1347797459-7183-4-git-send-email-avi@redhat.com> (raw)
In-Reply-To: <1347797459-7183-1-git-send-email-avi@redhat.com>
Use macros for bitness-insensitive register names, instead of
rolling our own.
Signed-off-by: Avi Kivity <avi@redhat.com>
---
arch/x86/kvm/svm.c | 46 ++++++++++++++++++++--------------------------
1 file changed, 20 insertions(+), 26 deletions(-)
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 611c728..818fceb 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -3782,12 +3782,6 @@ static void svm_cancel_injection(struct kvm_vcpu *vcpu)
svm_complete_interrupts(svm);
}
-#ifdef CONFIG_X86_64
-#define R "r"
-#else
-#define R "e"
-#endif
-
static void svm_vcpu_run(struct kvm_vcpu *vcpu)
{
struct vcpu_svm *svm = to_svm(vcpu);
@@ -3814,13 +3808,13 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu)
local_irq_enable();
asm volatile (
- "push %%"R"bp; \n\t"
- "mov %c[rbx](%[svm]), %%"R"bx \n\t"
- "mov %c[rcx](%[svm]), %%"R"cx \n\t"
- "mov %c[rdx](%[svm]), %%"R"dx \n\t"
- "mov %c[rsi](%[svm]), %%"R"si \n\t"
- "mov %c[rdi](%[svm]), %%"R"di \n\t"
- "mov %c[rbp](%[svm]), %%"R"bp \n\t"
+ "push %%" _ASM_BP "; \n\t"
+ "mov %c[rbx](%[svm]), %%" _ASM_BX " \n\t"
+ "mov %c[rcx](%[svm]), %%" _ASM_CX " \n\t"
+ "mov %c[rdx](%[svm]), %%" _ASM_DX " \n\t"
+ "mov %c[rsi](%[svm]), %%" _ASM_SI " \n\t"
+ "mov %c[rdi](%[svm]), %%" _ASM_DI " \n\t"
+ "mov %c[rbp](%[svm]), %%" _ASM_BP " \n\t"
#ifdef CONFIG_X86_64
"mov %c[r8](%[svm]), %%r8 \n\t"
"mov %c[r9](%[svm]), %%r9 \n\t"
@@ -3833,20 +3827,20 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu)
#endif
/* Enter guest mode */
- "push %%"R"ax \n\t"
- "mov %c[vmcb](%[svm]), %%"R"ax \n\t"
+ "push %%" _ASM_AX " \n\t"
+ "mov %c[vmcb](%[svm]), %%" _ASM_AX " \n\t"
__ex(SVM_VMLOAD) "\n\t"
__ex(SVM_VMRUN) "\n\t"
__ex(SVM_VMSAVE) "\n\t"
- "pop %%"R"ax \n\t"
+ "pop %%" _ASM_AX " \n\t"
/* Save guest registers, load host registers */
- "mov %%"R"bx, %c[rbx](%[svm]) \n\t"
- "mov %%"R"cx, %c[rcx](%[svm]) \n\t"
- "mov %%"R"dx, %c[rdx](%[svm]) \n\t"
- "mov %%"R"si, %c[rsi](%[svm]) \n\t"
- "mov %%"R"di, %c[rdi](%[svm]) \n\t"
- "mov %%"R"bp, %c[rbp](%[svm]) \n\t"
+ "mov %%" _ASM_BX ", %c[rbx](%[svm]) \n\t"
+ "mov %%" _ASM_CX ", %c[rcx](%[svm]) \n\t"
+ "mov %%" _ASM_DX ", %c[rdx](%[svm]) \n\t"
+ "mov %%" _ASM_SI ", %c[rsi](%[svm]) \n\t"
+ "mov %%" _ASM_DI ", %c[rdi](%[svm]) \n\t"
+ "mov %%" _ASM_BP ", %c[rbp](%[svm]) \n\t"
#ifdef CONFIG_X86_64
"mov %%r8, %c[r8](%[svm]) \n\t"
"mov %%r9, %c[r9](%[svm]) \n\t"
@@ -3857,7 +3851,7 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu)
"mov %%r14, %c[r14](%[svm]) \n\t"
"mov %%r15, %c[r15](%[svm]) \n\t"
#endif
- "pop %%"R"bp"
+ "pop %%" _ASM_BP
:
: [svm]"a"(svm),
[vmcb]"i"(offsetof(struct vcpu_svm, vmcb_pa)),
@@ -3878,9 +3872,11 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu)
[r15]"i"(offsetof(struct vcpu_svm, vcpu.arch.regs[VCPU_REGS_R15]))
#endif
: "cc", "memory"
- , R"bx", R"cx", R"dx", R"si", R"di"
#ifdef CONFIG_X86_64
+ , "rbx", "rcx", "rdx", "rsi", "rdi"
, "r8", "r9", "r10", "r11" , "r12", "r13", "r14", "r15"
+#else
+ , "ebx", "ecx", "edx", "esi", "edi"
#endif
);
@@ -3940,8 +3936,6 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu)
mark_all_clean(svm->vmcb);
}
-#undef R
-
static void svm_set_cr3(struct kvm_vcpu *vcpu, unsigned long root)
{
struct vcpu_svm *svm = to_svm(vcpu);
--
1.7.12
next prev parent reply other threads:[~2012-09-16 12:11 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-16 12:10 [PATCH 0/3] Prepare kvm for lto Avi Kivity
2012-09-16 12:10 ` [PATCH 1/3] KVM: VMX: Make lto-friendly Avi Kivity
2012-09-16 12:10 ` [PATCH 2/3] KVM: VMX: Make use of asm.h Avi Kivity
2012-09-16 12:10 ` Avi Kivity [this message]
2012-09-17 13:38 ` [PATCH 0/3] Prepare kvm for lto Marcelo Tosatti
-- strict thread matches above, loose matches on Subject: below --
2012-09-12 14:50 Avi Kivity
2012-09-12 14:50 ` [PATCH 3/3] KVM: SVM: Make use of asm.h Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1347797459-7183-4-git-send-email-avi@redhat.com \
--to=avi@redhat.com \
--cc=ak@linux.intel.com \
--cc=kvm@vger.kernel.org \
--cc=mtosatti@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.