From: Wei Ni <wni@nvidia.com>
To: swarren@wwwdotorg.org
Cc: krakesh@nvidia.com, ldewangan@nvidia.com,
linux-tegra@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Wei Ni <wni@nvidia.com>
Subject: [PATCH v2 2/5] ARM: dt: t20 seaboard: turn on the power for wlan
Date: Fri, 21 Sep 2012 16:54:57 +0800 [thread overview]
Message-ID: <1348217700-12309-3-git-send-email-wni@nvidia.com> (raw)
In-Reply-To: <1348217700-12309-1-git-send-email-wni@nvidia.com>
Enable the SDHCI1 controller. This is connected to the WiFi module.
Signed-off-by: Wei Ni <wni@nvidia.com>
---
arch/arm/boot/dts/tegra20-seaboard.dts | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index e60dc71..0ee474d 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -592,6 +592,12 @@
status = "okay";
};
+ sdhci@c8000000 {
+ status = "okay";
+ power-gpios = <&gpio 86 0>; /* gpio PK6 */
+ bus-width = <4>;
+ };
+
sdhci@c8000400 {
status = "okay";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
--
1.7.1
WARNING: multiple messages have this Message-ID (diff)
From: wni@nvidia.com (Wei Ni)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/5] ARM: dt: t20 seaboard: turn on the power for wlan
Date: Fri, 21 Sep 2012 16:54:57 +0800 [thread overview]
Message-ID: <1348217700-12309-3-git-send-email-wni@nvidia.com> (raw)
In-Reply-To: <1348217700-12309-1-git-send-email-wni@nvidia.com>
Enable the SDHCI1 controller. This is connected to the WiFi module.
Signed-off-by: Wei Ni <wni@nvidia.com>
---
arch/arm/boot/dts/tegra20-seaboard.dts | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index e60dc71..0ee474d 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -592,6 +592,12 @@
status = "okay";
};
+ sdhci at c8000000 {
+ status = "okay";
+ power-gpios = <&gpio 86 0>; /* gpio PK6 */
+ bus-width = <4>;
+ };
+
sdhci at c8000400 {
status = "okay";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
--
1.7.1
WARNING: multiple messages have this Message-ID (diff)
From: Wei Ni <wni@nvidia.com>
To: <swarren@wwwdotorg.org>
Cc: <krakesh@nvidia.com>, <ldewangan@nvidia.com>,
<linux-tegra@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, Wei Ni <wni@nvidia.com>
Subject: [PATCH v2 2/5] ARM: dt: t20 seaboard: turn on the power for wlan
Date: Fri, 21 Sep 2012 16:54:57 +0800 [thread overview]
Message-ID: <1348217700-12309-3-git-send-email-wni@nvidia.com> (raw)
In-Reply-To: <1348217700-12309-1-git-send-email-wni@nvidia.com>
Enable the SDHCI1 controller. This is connected to the WiFi module.
Signed-off-by: Wei Ni <wni@nvidia.com>
---
arch/arm/boot/dts/tegra20-seaboard.dts | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index e60dc71..0ee474d 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -592,6 +592,12 @@
status = "okay";
};
+ sdhci@c8000000 {
+ status = "okay";
+ power-gpios = <&gpio 86 0>; /* gpio PK6 */
+ bus-width = <4>;
+ };
+
sdhci@c8000400 {
status = "okay";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
--
1.7.1
next prev parent reply other threads:[~2012-09-21 8:54 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-21 8:54 [PATCH v2 0/5] ARM: tegra: enable wlan for t20 and t30 Wei Ni
2012-09-21 8:54 ` Wei Ni
2012-09-21 8:54 ` Wei Ni
2012-09-21 8:54 ` [PATCH v2 1/5] ARM: tegra: set up wlan clocks for tegra dt Wei Ni
2012-09-21 8:54 ` Wei Ni
2012-09-21 8:54 ` Wei Ni
2012-09-21 8:54 ` Wei Ni [this message]
2012-09-21 8:54 ` [PATCH v2 2/5] ARM: dt: t20 seaboard: turn on the power for wlan Wei Ni
2012-09-21 8:54 ` Wei Ni
2012-09-21 8:54 ` [PATCH v2 3/5] ARM: dt: t20 ventana: set pinmux and " Wei Ni
2012-09-21 8:54 ` Wei Ni
2012-09-21 8:54 ` Wei Ni
[not found] ` <1348217700-12309-1-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2012-09-21 8:54 ` [PATCH v2 4/5] ARM: dt: t30 cardhu: " Wei Ni
2012-09-21 8:54 ` Wei Ni
2012-09-21 8:54 ` Wei Ni
2012-09-21 8:55 ` [PATCH v2 5/5] ARM: tegra: enable brcmfmac in defconfig Wei Ni
2012-09-21 8:55 ` Wei Ni
2012-09-21 8:55 ` Wei Ni
[not found] ` <1348217700-12309-6-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2012-09-21 14:39 ` Arend van Spriel
2012-09-21 14:39 ` Arend van Spriel
2012-09-21 14:39 ` Arend van Spriel
[not found] ` <505C7C27.2050108-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2012-09-21 16:19 ` Stephen Warren
2012-09-21 16:19 ` Stephen Warren
2012-09-21 16:19 ` Stephen Warren
[not found] ` <505C93A1.2040801-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2012-09-21 19:05 ` Arend van Spriel
2012-09-21 19:05 ` Arend van Spriel
2012-09-21 19:05 ` Arend van Spriel
[not found] ` <505CBA6E.3030304-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2012-09-24 17:48 ` Stephen Warren
2012-09-24 17:48 ` Stephen Warren
2012-09-24 17:48 ` Stephen Warren
2012-10-15 21:18 ` [PATCH v2 0/5] ARM: tegra: enable wlan for t20 and t30 Stephen Warren
2012-10-15 21:18 ` Stephen Warren
2012-10-15 21:18 ` Stephen Warren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1348217700-12309-3-git-send-email-wni@nvidia.com \
--to=wni@nvidia.com \
--cc=krakesh@nvidia.com \
--cc=ldewangan@nvidia.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.