From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv2 2/3] clk: Add devm_clk_{register,unregister}()
Date: Mon, 24 Sep 2012 13:38:04 -0700 [thread overview]
Message-ID: <1348519085-5888-2-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1348519085-5888-1-git-send-email-sboyd@codeaurora.org>
Some clock drivers can be simplified if devres takes care of
unregistering any registered clocks along error paths. Introduce
devm_clk_register() so that clock drivers get unregistration for
free along with simplified error paths.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
v2: Use devres_release()
drivers/clk/clk.c | 111 +++++++++++++++++++++++++++++++++++--------
include/linux/clk-provider.h | 2 +
2 files changed, 92 insertions(+), 21 deletions(-)
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 56e4495e..6852809 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -17,6 +17,7 @@
#include <linux/list.h>
#include <linux/slab.h>
#include <linux/of.h>
+#include <linux/device.h>
static DEFINE_SPINLOCK(enable_lock);
static DEFINE_MUTEX(prepare_lock);
@@ -1361,28 +1362,9 @@ struct clk *__clk_register(struct device *dev, struct clk_hw *hw)
}
EXPORT_SYMBOL_GPL(__clk_register);
-/**
- * clk_register - allocate a new clock, register it and return an opaque cookie
- * @dev: device that is registering this clock
- * @hw: link to hardware-specific clock data
- *
- * clk_register is the primary interface for populating the clock tree with new
- * clock nodes. It returns a pointer to the newly allocated struct clk which
- * cannot be dereferenced by driver code but may be used in conjuction with the
- * rest of the clock API. In the event of an error clk_register will return an
- * error code; drivers must test for an error code after calling clk_register.
- */
-struct clk *clk_register(struct device *dev, struct clk_hw *hw)
+static int _clk_register(struct device *dev, struct clk_hw *hw, struct clk *clk)
{
int i, ret;
- struct clk *clk;
-
- clk = kzalloc(sizeof(*clk), GFP_KERNEL);
- if (!clk) {
- pr_err("%s: could not allocate clk\n", __func__);
- ret = -ENOMEM;
- goto fail_out;
- }
clk->name = kstrdup(hw->init->name, GFP_KERNEL);
if (!clk->name) {
@@ -1420,7 +1402,7 @@ struct clk *clk_register(struct device *dev, struct clk_hw *hw)
ret = __clk_init(dev, clk);
if (!ret)
- return clk;
+ return 0;
fail_parent_names_copy:
while (--i >= 0)
@@ -1429,6 +1411,36 @@ fail_parent_names_copy:
fail_parent_names:
kfree(clk->name);
fail_name:
+ return ret;
+}
+
+/**
+ * clk_register - allocate a new clock, register it and return an opaque cookie
+ * @dev: device that is registering this clock
+ * @hw: link to hardware-specific clock data
+ *
+ * clk_register is the primary interface for populating the clock tree with new
+ * clock nodes. It returns a pointer to the newly allocated struct clk which
+ * cannot be dereferenced by driver code but may be used in conjuction with the
+ * rest of the clock API. In the event of an error clk_register will return an
+ * error code; drivers must test for an error code after calling clk_register.
+ */
+struct clk *clk_register(struct device *dev, struct clk_hw *hw)
+{
+ int ret;
+ struct clk *clk;
+
+ clk = kzalloc(sizeof(*clk), GFP_KERNEL);
+ if (!clk) {
+ pr_err("%s: could not allocate clk\n", __func__);
+ ret = -ENOMEM;
+ goto fail_out;
+ }
+
+ ret = _clk_register(dev, hw, clk);
+ if (!ret)
+ return clk;
+
kfree(clk);
fail_out:
return ERR_PTR(ret);
@@ -1444,6 +1456,63 @@ EXPORT_SYMBOL_GPL(clk_register);
void clk_unregister(struct clk *clk) {}
EXPORT_SYMBOL_GPL(clk_unregister);
+static void devm_clk_release(struct device *dev, void *res)
+{
+ clk_unregister(res);
+}
+
+/**
+ * devm_clk_register - resource managed clk_register()
+ * @dev: device that is registering this clock
+ * @hw: link to hardware-specific clock data
+ *
+ * Managed clk_register(). Clocks returned from this function are
+ * automatically clk_unregister()ed on driver detach. See clk_register() for
+ * more information.
+ */
+struct clk *devm_clk_register(struct device *dev, struct clk_hw *hw)
+{
+ struct clk *clk;
+ int ret;
+
+ clk = devres_alloc(devm_clk_release, sizeof(*clk), GFP_KERNEL);
+ if (!clk)
+ return ERR_PTR(-ENOMEM);
+
+ ret = _clk_register(dev, hw, clk);
+ if (!ret) {
+ devres_add(dev, clk);
+ } else {
+ devres_free(clk);
+ clk = ERR_PTR(ret);
+ }
+
+ return clk;
+}
+EXPORT_SYMBOL_GPL(devm_clk_register);
+
+static int devm_clk_match(struct device *dev, void *res, void *data)
+{
+ struct clk *c = res;
+ if (WARN_ON(!c))
+ return 0;
+ return c == data;
+}
+
+/**
+ * devm_clk_unregister - resource managed clk_unregister()
+ * @clk: clock to unregister
+ *
+ * Deallocate a clock allocated with devm_clk_register(). Normally
+ * this function will not need to be called and the resource management
+ * code will ensure that the resource is freed.
+ */
+void devm_clk_unregister(struct device *dev, struct clk *clk)
+{
+ WARN_ON(devres_release(dev, devm_clk_release, devm_clk_match, clk));
+}
+EXPORT_SYMBOL_GPL(devm_clk_unregister);
+
/*** clk rate change notifiers ***/
/**
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index c127315..710c6cb 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -327,8 +327,10 @@ struct clk *clk_register_fixed_factor(struct device *dev, const char *name,
* error code; drivers must test for an error code after calling clk_register.
*/
struct clk *clk_register(struct device *dev, struct clk_hw *hw);
+struct clk *devm_clk_register(struct device *dev, struct clk_hw *hw);
void clk_unregister(struct clk *clk);
+void devm_clk_unregister(struct device *dev, struct clk *clk);
/* helper functions */
const char *__clk_get_name(struct clk *clk);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
WARNING: multiple messages have this Message-ID (diff)
From: Stephen Boyd <sboyd@codeaurora.org>
To: Mike Turquette <mturquette@linaro.org>
Cc: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCHv2 2/3] clk: Add devm_clk_{register,unregister}()
Date: Mon, 24 Sep 2012 13:38:04 -0700 [thread overview]
Message-ID: <1348519085-5888-2-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1348519085-5888-1-git-send-email-sboyd@codeaurora.org>
Some clock drivers can be simplified if devres takes care of
unregistering any registered clocks along error paths. Introduce
devm_clk_register() so that clock drivers get unregistration for
free along with simplified error paths.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
v2: Use devres_release()
drivers/clk/clk.c | 111 +++++++++++++++++++++++++++++++++++--------
include/linux/clk-provider.h | 2 +
2 files changed, 92 insertions(+), 21 deletions(-)
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 56e4495e..6852809 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -17,6 +17,7 @@
#include <linux/list.h>
#include <linux/slab.h>
#include <linux/of.h>
+#include <linux/device.h>
static DEFINE_SPINLOCK(enable_lock);
static DEFINE_MUTEX(prepare_lock);
@@ -1361,28 +1362,9 @@ struct clk *__clk_register(struct device *dev, struct clk_hw *hw)
}
EXPORT_SYMBOL_GPL(__clk_register);
-/**
- * clk_register - allocate a new clock, register it and return an opaque cookie
- * @dev: device that is registering this clock
- * @hw: link to hardware-specific clock data
- *
- * clk_register is the primary interface for populating the clock tree with new
- * clock nodes. It returns a pointer to the newly allocated struct clk which
- * cannot be dereferenced by driver code but may be used in conjuction with the
- * rest of the clock API. In the event of an error clk_register will return an
- * error code; drivers must test for an error code after calling clk_register.
- */
-struct clk *clk_register(struct device *dev, struct clk_hw *hw)
+static int _clk_register(struct device *dev, struct clk_hw *hw, struct clk *clk)
{
int i, ret;
- struct clk *clk;
-
- clk = kzalloc(sizeof(*clk), GFP_KERNEL);
- if (!clk) {
- pr_err("%s: could not allocate clk\n", __func__);
- ret = -ENOMEM;
- goto fail_out;
- }
clk->name = kstrdup(hw->init->name, GFP_KERNEL);
if (!clk->name) {
@@ -1420,7 +1402,7 @@ struct clk *clk_register(struct device *dev, struct clk_hw *hw)
ret = __clk_init(dev, clk);
if (!ret)
- return clk;
+ return 0;
fail_parent_names_copy:
while (--i >= 0)
@@ -1429,6 +1411,36 @@ fail_parent_names_copy:
fail_parent_names:
kfree(clk->name);
fail_name:
+ return ret;
+}
+
+/**
+ * clk_register - allocate a new clock, register it and return an opaque cookie
+ * @dev: device that is registering this clock
+ * @hw: link to hardware-specific clock data
+ *
+ * clk_register is the primary interface for populating the clock tree with new
+ * clock nodes. It returns a pointer to the newly allocated struct clk which
+ * cannot be dereferenced by driver code but may be used in conjuction with the
+ * rest of the clock API. In the event of an error clk_register will return an
+ * error code; drivers must test for an error code after calling clk_register.
+ */
+struct clk *clk_register(struct device *dev, struct clk_hw *hw)
+{
+ int ret;
+ struct clk *clk;
+
+ clk = kzalloc(sizeof(*clk), GFP_KERNEL);
+ if (!clk) {
+ pr_err("%s: could not allocate clk\n", __func__);
+ ret = -ENOMEM;
+ goto fail_out;
+ }
+
+ ret = _clk_register(dev, hw, clk);
+ if (!ret)
+ return clk;
+
kfree(clk);
fail_out:
return ERR_PTR(ret);
@@ -1444,6 +1456,63 @@ EXPORT_SYMBOL_GPL(clk_register);
void clk_unregister(struct clk *clk) {}
EXPORT_SYMBOL_GPL(clk_unregister);
+static void devm_clk_release(struct device *dev, void *res)
+{
+ clk_unregister(res);
+}
+
+/**
+ * devm_clk_register - resource managed clk_register()
+ * @dev: device that is registering this clock
+ * @hw: link to hardware-specific clock data
+ *
+ * Managed clk_register(). Clocks returned from this function are
+ * automatically clk_unregister()ed on driver detach. See clk_register() for
+ * more information.
+ */
+struct clk *devm_clk_register(struct device *dev, struct clk_hw *hw)
+{
+ struct clk *clk;
+ int ret;
+
+ clk = devres_alloc(devm_clk_release, sizeof(*clk), GFP_KERNEL);
+ if (!clk)
+ return ERR_PTR(-ENOMEM);
+
+ ret = _clk_register(dev, hw, clk);
+ if (!ret) {
+ devres_add(dev, clk);
+ } else {
+ devres_free(clk);
+ clk = ERR_PTR(ret);
+ }
+
+ return clk;
+}
+EXPORT_SYMBOL_GPL(devm_clk_register);
+
+static int devm_clk_match(struct device *dev, void *res, void *data)
+{
+ struct clk *c = res;
+ if (WARN_ON(!c))
+ return 0;
+ return c == data;
+}
+
+/**
+ * devm_clk_unregister - resource managed clk_unregister()
+ * @clk: clock to unregister
+ *
+ * Deallocate a clock allocated with devm_clk_register(). Normally
+ * this function will not need to be called and the resource management
+ * code will ensure that the resource is freed.
+ */
+void devm_clk_unregister(struct device *dev, struct clk *clk)
+{
+ WARN_ON(devres_release(dev, devm_clk_release, devm_clk_match, clk));
+}
+EXPORT_SYMBOL_GPL(devm_clk_unregister);
+
/*** clk rate change notifiers ***/
/**
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index c127315..710c6cb 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -327,8 +327,10 @@ struct clk *clk_register_fixed_factor(struct device *dev, const char *name,
* error code; drivers must test for an error code after calling clk_register.
*/
struct clk *clk_register(struct device *dev, struct clk_hw *hw);
+struct clk *devm_clk_register(struct device *dev, struct clk_hw *hw);
void clk_unregister(struct clk *clk);
+void devm_clk_unregister(struct device *dev, struct clk *clk);
/* helper functions */
const char *__clk_get_name(struct clk *clk);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
next prev parent reply other threads:[~2012-09-24 20:38 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-19 6:05 [PATCH 0/3] Introduce devm_clk_register() Stephen Boyd
2012-09-19 6:05 ` Stephen Boyd
2012-09-19 6:05 ` [PATCH 1/3] clk: wm831x: Fix clk_register() error code checking Stephen Boyd
2012-09-19 6:05 ` Stephen Boyd
2012-09-20 1:31 ` Mark Brown
2012-09-20 1:31 ` Mark Brown
2012-09-19 6:05 ` [PATCH 2/3] clk: Add devm_clk_{register,unregister}() Stephen Boyd
2012-09-19 6:05 ` Stephen Boyd
2012-09-21 2:33 ` Stephen Boyd
2012-09-21 2:33 ` Stephen Boyd
2012-09-22 1:07 ` Mike Turquette
2012-09-22 7:20 ` Stephen Boyd
2012-09-22 7:20 ` Stephen Boyd
2012-09-19 6:05 ` [PATCH 3/3] clk: wm831x: Use devm_clk_register() to simplify code Stephen Boyd
2012-09-19 6:05 ` Stephen Boyd
2012-09-20 1:40 ` Mark Brown
2012-09-20 1:40 ` Mark Brown
2012-09-22 10:06 ` [PATCH 0/3] Introduce devm_clk_register() Russell King - ARM Linux
2012-09-22 10:06 ` Russell King - ARM Linux
2012-09-24 20:20 ` Stephen Boyd
2012-09-24 20:20 ` Stephen Boyd
2012-09-24 20:35 ` Russell King - ARM Linux
2012-09-24 20:35 ` Russell King - ARM Linux
2012-09-24 20:38 ` [PATCHv2 1/3] clk: wm831x: Fix clk_register() error code checking Stephen Boyd
2012-09-24 20:38 ` Stephen Boyd
2012-09-24 20:38 ` Stephen Boyd [this message]
2012-09-24 20:38 ` [PATCHv2 2/3] clk: Add devm_clk_{register,unregister}() Stephen Boyd
2012-09-24 20:38 ` [PATCHv2 3/3] clk: wm831x: Use devm_clk_register() to simplify code Stephen Boyd
2012-09-24 20:38 ` Stephen Boyd
2012-10-29 18:13 ` [PATCHv2 1/3] clk: wm831x: Fix clk_register() error code checking Mike Turquette
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1348519085-5888-2-git-send-email-sboyd@codeaurora.org \
--to=sboyd@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.