From: Ashish Chavan <ashish.chavan@kpitcummins.com>
To: Mark Brown <broonie@opensource.wolfsonmicro.com>,
lrg <lrg@ti.com>, alsa-devel <alsa-devel@alsa-project.org>
Cc: linux-kernel <linux-kernel@vger.kernel.org>,
David Dajun Chen <david.chen@diasemi.com>
Subject: [PATCH] ASoC: codecs: da9055: Minor improvement in ALC calibration process
Date: Thu, 11 Oct 2012 14:04:37 +0530 [thread overview]
Message-ID: <1349944477.24126.11.camel@matrix> (raw)
This patch slightly improves ALC calibration process of da9055 codec
driver by muting Mic PGAs during calibration.
Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com>
Signed-off-by: David Dajun Chen <david.chen@diasemi.com>
---
sound/soc/codecs/da9055.c | 22 +++++++++++++++++++++-
1 files changed, 21 insertions(+), 1 deletions(-)
diff --git a/sound/soc/codecs/da9055.c b/sound/soc/codecs/da9055.c
index 27c4454..abf3e43 100644
--- a/sound/soc/codecs/da9055.c
+++ b/sound/soc/codecs/da9055.c
@@ -179,6 +179,12 @@
#define DA9055_AIF_WORD_S24_LE (2 << 2)
#define DA9055_AIF_WORD_S32_LE (3 << 2)
+/* MIC_L_CTRL bit fields */
+#define DA9055_MIC_L_MUTE_EN (1 << 6)
+
+/* MIC_R_CTRL bit fields */
+#define DA9055_MIC_R_MUTE_EN (1 << 6)
+
/* MIXIN_L_CTRL bit fields */
#define DA9055_MIXIN_L_MIX_EN (1 << 3)
@@ -477,7 +483,7 @@ static int da9055_put_alc_sw(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
- u8 reg_val, adc_left, adc_right;
+ u8 reg_val, adc_left, adc_right, mic_left, mic_right;
int avg_left_data, avg_right_data, offset_l, offset_r;
if (ucontrol->value.integer.value[0]) {
@@ -486,6 +492,16 @@ static int da9055_put_alc_sw(struct snd_kcontrol *kcontrol,
* offsets must be done first
*/
+ /* Save current values from Mic control registers */
+ mic_left = snd_soc_read(codec, DA9055_MIC_L_CTRL);
+ mic_right = snd_soc_read(codec, DA9055_MIC_R_CTRL);
+
+ /* Mute Mic PGA Left and Right */
+ snd_soc_update_bits(codec, DA9055_MIC_L_CTRL,
+ DA9055_MIC_L_MUTE_EN, DA9055_MIC_L_MUTE_EN);
+ snd_soc_update_bits(codec, DA9055_MIC_R_CTRL,
+ DA9055_MIC_R_MUTE_EN, DA9055_MIC_R_MUTE_EN);
+
/* Save current values from ADC control registers */
adc_left = snd_soc_read(codec, DA9055_ADC_L_CTRL);
adc_right = snd_soc_read(codec, DA9055_ADC_R_CTRL);
@@ -521,6 +537,10 @@ static int da9055_put_alc_sw(struct snd_kcontrol *kcontrol,
/* Restore original values of ADC control registers */
snd_soc_write(codec, DA9055_ADC_L_CTRL, adc_left);
snd_soc_write(codec, DA9055_ADC_R_CTRL, adc_right);
+
+ /* Restore original values of Mic control registers */
+ snd_soc_write(codec, DA9055_MIC_L_CTRL, mic_left);
+ snd_soc_write(codec, DA9055_MIC_R_CTRL, mic_right);
}
return snd_soc_put_volsw(kcontrol, ucontrol);
--
1.7.1
WARNING: multiple messages have this Message-ID (diff)
From: Ashish Chavan <ashish.chavan@kpitcummins.com>
To: Mark Brown <broonie@opensource.wolfsonmicro.com>,
lrg <lrg@ti.com>, alsa-devel <alsa-devel@alsa-project.org>
Cc: David Dajun Chen <david.chen@diasemi.com>,
linux-kernel <linux-kernel@vger.kernel.org>
Subject: [alsa-devel] [PATCH] ASoC: codecs: da9055: Minor improvement in ALC calibration process
Date: Thu, 11 Oct 2012 14:04:37 +0530 [thread overview]
Message-ID: <1349944477.24126.11.camel@matrix> (raw)
This patch slightly improves ALC calibration process of da9055 codec
driver by muting Mic PGAs during calibration.
Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com>
Signed-off-by: David Dajun Chen <david.chen@diasemi.com>
---
sound/soc/codecs/da9055.c | 22 +++++++++++++++++++++-
1 files changed, 21 insertions(+), 1 deletions(-)
diff --git a/sound/soc/codecs/da9055.c b/sound/soc/codecs/da9055.c
index 27c4454..abf3e43 100644
--- a/sound/soc/codecs/da9055.c
+++ b/sound/soc/codecs/da9055.c
@@ -179,6 +179,12 @@
#define DA9055_AIF_WORD_S24_LE (2 << 2)
#define DA9055_AIF_WORD_S32_LE (3 << 2)
+/* MIC_L_CTRL bit fields */
+#define DA9055_MIC_L_MUTE_EN (1 << 6)
+
+/* MIC_R_CTRL bit fields */
+#define DA9055_MIC_R_MUTE_EN (1 << 6)
+
/* MIXIN_L_CTRL bit fields */
#define DA9055_MIXIN_L_MIX_EN (1 << 3)
@@ -477,7 +483,7 @@ static int da9055_put_alc_sw(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
- u8 reg_val, adc_left, adc_right;
+ u8 reg_val, adc_left, adc_right, mic_left, mic_right;
int avg_left_data, avg_right_data, offset_l, offset_r;
if (ucontrol->value.integer.value[0]) {
@@ -486,6 +492,16 @@ static int da9055_put_alc_sw(struct snd_kcontrol *kcontrol,
* offsets must be done first
*/
+ /* Save current values from Mic control registers */
+ mic_left = snd_soc_read(codec, DA9055_MIC_L_CTRL);
+ mic_right = snd_soc_read(codec, DA9055_MIC_R_CTRL);
+
+ /* Mute Mic PGA Left and Right */
+ snd_soc_update_bits(codec, DA9055_MIC_L_CTRL,
+ DA9055_MIC_L_MUTE_EN, DA9055_MIC_L_MUTE_EN);
+ snd_soc_update_bits(codec, DA9055_MIC_R_CTRL,
+ DA9055_MIC_R_MUTE_EN, DA9055_MIC_R_MUTE_EN);
+
/* Save current values from ADC control registers */
adc_left = snd_soc_read(codec, DA9055_ADC_L_CTRL);
adc_right = snd_soc_read(codec, DA9055_ADC_R_CTRL);
@@ -521,6 +537,10 @@ static int da9055_put_alc_sw(struct snd_kcontrol *kcontrol,
/* Restore original values of ADC control registers */
snd_soc_write(codec, DA9055_ADC_L_CTRL, adc_left);
snd_soc_write(codec, DA9055_ADC_R_CTRL, adc_right);
+
+ /* Restore original values of Mic control registers */
+ snd_soc_write(codec, DA9055_MIC_L_CTRL, mic_left);
+ snd_soc_write(codec, DA9055_MIC_R_CTRL, mic_right);
}
return snd_soc_put_volsw(kcontrol, ucontrol);
--
1.7.1
next reply other threads:[~2012-10-11 8:23 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-11 8:34 Ashish Chavan [this message]
2012-10-11 8:34 ` [alsa-devel] [PATCH] ASoC: codecs: da9055: Minor improvement in ALC calibration process Ashish Chavan
2012-10-11 8:42 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1349944477.24126.11.camel@matrix \
--to=ashish.chavan@kpitcummins.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=david.chen@diasemi.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.