* [PATCH 1/2] dvb-frontends: use %*ph[N] to dump small buffers @ 2012-11-28 9:32 Andy Shevchenko 2012-11-28 9:32 ` [PATCH 2/2] dvb: or51211: apply pr_fmt and use pr_* macros instead of printk Andy Shevchenko 0 siblings, 1 reply; 3+ messages in thread From: Andy Shevchenko @ 2012-11-28 9:32 UTC (permalink / raw) To: Mauro Carvalho Chehab, Malcolm Priestley, linux-media; +Cc: Andy Shevchenko Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- drivers/media/dvb-frontends/ix2505v.c | 2 +- drivers/media/dvb-frontends/or51211.c | 5 +---- 2 files changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/media/dvb-frontends/ix2505v.c b/drivers/media/dvb-frontends/ix2505v.c index bc5a820..0e3387e 100644 --- a/drivers/media/dvb-frontends/ix2505v.c +++ b/drivers/media/dvb-frontends/ix2505v.c @@ -212,7 +212,7 @@ static int ix2505v_set_params(struct dvb_frontend *fe) lpf = 0xb; deb_info("Osc=%x b_w=%x lpf=%x\n", local_osc, b_w, lpf); - deb_info("Data 0=[%x%x%x%x]\n", data[0], data[1], data[2], data[3]); + deb_info("Data 0=[%4phN]\n", data); if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); diff --git a/drivers/media/dvb-frontends/or51211.c b/drivers/media/dvb-frontends/or51211.c index c625b57..1af997e 100644 --- a/drivers/media/dvb-frontends/or51211.c +++ b/drivers/media/dvb-frontends/or51211.c @@ -471,10 +471,7 @@ static int or51211_init(struct dvb_frontend* fe) i--; } } - dprintk("read_fwbits %x %x %x %x %x %x %x %x %x %x\n", - rec_buf[0], rec_buf[1], rec_buf[2], rec_buf[3], - rec_buf[4], rec_buf[5], rec_buf[6], rec_buf[7], - rec_buf[8], rec_buf[9]); + dprintk("read_fwbits %10ph\n", rec_buf); printk(KERN_INFO "or51211: ver TU%02x%02x%02x VSB mode %02x" " Status %02x\n", -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH 2/2] dvb: or51211: apply pr_fmt and use pr_* macros instead of printk 2012-11-28 9:32 [PATCH 1/2] dvb-frontends: use %*ph[N] to dump small buffers Andy Shevchenko @ 2012-11-28 9:32 ` Andy Shevchenko 0 siblings, 0 replies; 3+ messages in thread From: Andy Shevchenko @ 2012-11-28 9:32 UTC (permalink / raw) To: Mauro Carvalho Chehab, Malcolm Priestley, linux-media; +Cc: Andy Shevchenko Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- drivers/media/dvb-frontends/or51211.c | 94 +++++++++++++++------------------ 1 file changed, 43 insertions(+), 51 deletions(-) diff --git a/drivers/media/dvb-frontends/or51211.c b/drivers/media/dvb-frontends/or51211.c index 1af997e..9db8008 100644 --- a/drivers/media/dvb-frontends/or51211.c +++ b/drivers/media/dvb-frontends/or51211.c @@ -42,11 +42,11 @@ #include "dvb_frontend.h" #include "or51211.h" +#define pr_fmt(fmt) KBUILD_MODNAME ": %s: " fmt, __func__ + static int debug; #define dprintk(args...) \ - do { \ - if (debug) printk(KERN_DEBUG "or51211: " args); \ - } while (0) + do { if (debug) pr_debug(args); } while (0) static u8 run_buf[] = {0x7f,0x01}; static u8 cmd_buf[] = {0x04,0x01,0x50,0x80,0x06}; // ATSC @@ -80,8 +80,7 @@ static int i2c_writebytes (struct or51211_state* state, u8 reg, const u8 *buf, msg.buf = (u8 *)buf; if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { - printk(KERN_WARNING "or51211: i2c_writebytes error " - "(addr %02x, err == %i)\n", reg, err); + pr_warn("error (addr %02x, err == %i)\n", reg, err); return -EREMOTEIO; } @@ -98,8 +97,7 @@ static int i2c_readbytes(struct or51211_state *state, u8 reg, u8 *buf, int len) msg.buf = buf; if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { - printk(KERN_WARNING "or51211: i2c_readbytes error " - "(addr %02x, err == %i)\n", reg, err); + pr_warn("error (addr %02x, err == %i)\n", reg, err); return -EREMOTEIO; } @@ -118,11 +116,11 @@ static int or51211_load_firmware (struct dvb_frontend* fe, /* Get eprom data */ tudata[0] = 17; if (i2c_writebytes(state,0x50,tudata,1)) { - printk(KERN_WARNING "or51211:load_firmware error eprom addr\n"); + pr_warn("error eprom addr\n"); return -1; } if (i2c_readbytes(state,0x50,&tudata[145],192)) { - printk(KERN_WARNING "or51211: load_firmware error eprom\n"); + pr_warn("error eprom\n"); return -1; } @@ -136,32 +134,32 @@ static int or51211_load_firmware (struct dvb_frontend* fe, state->config->reset(fe); if (i2c_writebytes(state,state->config->demod_address,tudata,585)) { - printk(KERN_WARNING "or51211: load_firmware error 1\n"); + pr_warn("error 1\n"); return -1; } msleep(1); if (i2c_writebytes(state,state->config->demod_address, &fw->data[393],8125)) { - printk(KERN_WARNING "or51211: load_firmware error 2\n"); + pr_warn("error 2\n"); return -1; } msleep(1); if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) { - printk(KERN_WARNING "or51211: load_firmware error 3\n"); + pr_warn("error 3\n"); return -1; } /* Wait at least 5 msec */ msleep(10); if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) { - printk(KERN_WARNING "or51211: load_firmware error 4\n"); + pr_warn("error 4\n"); return -1; } msleep(10); - printk("or51211: Done.\n"); + pr_info("Done.\n"); return 0; }; @@ -173,14 +171,14 @@ static int or51211_setmode(struct dvb_frontend* fe, int mode) state->config->setmode(fe, mode); if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) { - printk(KERN_WARNING "or51211: setmode error 1\n"); + pr_warn("error 1\n"); return -1; } /* Wait at least 5 msec */ msleep(10); if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) { - printk(KERN_WARNING "or51211: setmode error 2\n"); + pr_warn("error 2\n"); return -1; } @@ -196,7 +194,7 @@ static int or51211_setmode(struct dvb_frontend* fe, int mode) * normal +/-150kHz Carrier acquisition range */ if (i2c_writebytes(state,state->config->demod_address,cmd_buf,3)) { - printk(KERN_WARNING "or51211: setmode error 3\n"); + pr_warn("error 3\n"); return -1; } @@ -206,14 +204,14 @@ static int or51211_setmode(struct dvb_frontend* fe, int mode) rec_buf[3] = 0x00; msleep(20); if (i2c_writebytes(state,state->config->demod_address,rec_buf,3)) { - printk(KERN_WARNING "or51211: setmode error 5\n"); + pr_warn("error 5\n"); } msleep(3); if (i2c_readbytes(state,state->config->demod_address,&rec_buf[10],2)) { - printk(KERN_WARNING "or51211: setmode error 6"); + pr_warn("error 6\n"); return -1; } - dprintk("setmode rec status %02x %02x\n",rec_buf[10],rec_buf[11]); + dprintk("rec status %02x %02x\n", rec_buf[10], rec_buf[11]); return 0; } @@ -248,15 +246,15 @@ static int or51211_read_status(struct dvb_frontend* fe, fe_status_t* status) /* Receiver Status */ if (i2c_writebytes(state,state->config->demod_address,snd_buf,3)) { - printk(KERN_WARNING "or51132: read_status write error\n"); + pr_warn("write error\n"); return -1; } msleep(3); if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) { - printk(KERN_WARNING "or51132: read_status read error\n"); + pr_warn("read error\n"); return -1; } - dprintk("read_status %x %x\n",rec_buf[0],rec_buf[1]); + dprintk("%x %x\n", rec_buf[0], rec_buf[1]); if (rec_buf[0] & 0x01) { /* Receiver Lock */ *status |= FE_HAS_SIGNAL; @@ -306,20 +304,18 @@ static int or51211_read_snr(struct dvb_frontend* fe, u16* snr) snd_buf[2] = 0x04; if (i2c_writebytes(state,state->config->demod_address,snd_buf,3)) { - printk(KERN_WARNING "%s: error writing snr reg\n", - __func__); + pr_warn("error writing snr reg\n"); return -1; } if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) { - printk(KERN_WARNING "%s: read_status read error\n", - __func__); + pr_warn("read_status read error\n"); return -1; } state->snr = calculate_snr(rec_buf[0], 89599047); *snr = (state->snr) >> 16; - dprintk("%s: noise = 0x%02x, snr = %d.%02d dB\n", __func__, rec_buf[0], + dprintk("noise = 0x%02x, snr = %d.%02d dB\n", rec_buf[0], state->snr >> 24, (((state->snr>>8) & 0xffff) * 100) >> 16); return 0; @@ -375,25 +371,24 @@ static int or51211_init(struct dvb_frontend* fe) if (!state->initialized) { /* Request the firmware, this will block until it uploads */ - printk(KERN_INFO "or51211: Waiting for firmware upload " - "(%s)...\n", OR51211_DEFAULT_FIRMWARE); + pr_info("Waiting for firmware upload (%s)...\n", + OR51211_DEFAULT_FIRMWARE); ret = config->request_firmware(fe, &fw, OR51211_DEFAULT_FIRMWARE); - printk(KERN_INFO "or51211:Got Hotplug firmware\n"); + pr_info("Got Hotplug firmware\n"); if (ret) { - printk(KERN_WARNING "or51211: No firmware uploaded " - "(timeout or file not found?)\n"); + pr_warn("No firmware uploaded " + "(timeout or file not found?)\n"); return ret; } ret = or51211_load_firmware(fe, fw); release_firmware(fw); if (ret) { - printk(KERN_WARNING "or51211: Writing firmware to " - "device failed!\n"); + pr_warn("Writing firmware to device failed!\n"); return ret; } - printk(KERN_INFO "or51211: Firmware upload complete.\n"); + pr_info("Firmware upload complete.\n"); /* Set operation mode in Receiver 1 register; * type 1: @@ -406,7 +401,7 @@ static int or51211_init(struct dvb_frontend* fe) */ if (i2c_writebytes(state,state->config->demod_address, cmd_buf,3)) { - printk(KERN_WARNING "or51211: Load DVR Error 5\n"); + pr_warn("Load DVR Error 5\n"); return -1; } @@ -419,13 +414,13 @@ static int or51211_init(struct dvb_frontend* fe) msleep(30); if (i2c_writebytes(state,state->config->demod_address, rec_buf,3)) { - printk(KERN_WARNING "or51211: Load DVR Error A\n"); + pr_warn("Load DVR Error A\n"); return -1; } msleep(3); if (i2c_readbytes(state,state->config->demod_address, &rec_buf[10],2)) { - printk(KERN_WARNING "or51211: Load DVR Error B\n"); + pr_warn("Load DVR Error B\n"); return -1; } @@ -436,13 +431,13 @@ static int or51211_init(struct dvb_frontend* fe) msleep(20); if (i2c_writebytes(state,state->config->demod_address, rec_buf,3)) { - printk(KERN_WARNING "or51211: Load DVR Error C\n"); + pr_warn("Load DVR Error C\n"); return -1; } msleep(3); if (i2c_readbytes(state,state->config->demod_address, &rec_buf[12],2)) { - printk(KERN_WARNING "or51211: Load DVR Error D\n"); + pr_warn("Load DVR Error D\n"); return -1; } @@ -454,16 +449,14 @@ static int or51211_init(struct dvb_frontend* fe) get_ver_buf[4] = i+1; if (i2c_writebytes(state,state->config->demod_address, get_ver_buf,5)) { - printk(KERN_WARNING "or51211:Load DVR Error 6" - " - %d\n",i); + pr_warn("Load DVR Error 6 - %d\n", i); return -1; } msleep(3); if (i2c_readbytes(state,state->config->demod_address, &rec_buf[i*2],2)) { - printk(KERN_WARNING "or51211:Load DVR Error 7" - " - %d\n",i); + pr_warn("Load DVR Error 7 - %d\n", i); return -1; } /* If we didn't receive the right index, try again */ @@ -473,10 +466,9 @@ static int or51211_init(struct dvb_frontend* fe) } dprintk("read_fwbits %10ph\n", rec_buf); - printk(KERN_INFO "or51211: ver TU%02x%02x%02x VSB mode %02x" - " Status %02x\n", - rec_buf[2], rec_buf[4],rec_buf[6], - rec_buf[12],rec_buf[10]); + pr_info("ver TU%02x%02x%02x VSB mode %02x Status %02x\n", + rec_buf[2], rec_buf[4], rec_buf[6], rec_buf[12], + rec_buf[10]); rec_buf[0] = 0x04; rec_buf[1] = 0x00; @@ -485,13 +477,13 @@ static int or51211_init(struct dvb_frontend* fe) msleep(20); if (i2c_writebytes(state,state->config->demod_address, rec_buf,3)) { - printk(KERN_WARNING "or51211: Load DVR Error 8\n"); + pr_warn("Load DVR Error 8\n"); return -1; } msleep(20); if (i2c_readbytes(state,state->config->demod_address, &rec_buf[8],2)) { - printk(KERN_WARNING "or51211: Load DVR Error 9\n"); + pr_warn("Load DVR Error 9\n"); return -1; } state->initialized = 1; -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH 1/2] dvb-frontends: use %*ph[N] to dump small buffers @ 2012-10-26 13:40 Andy Shevchenko 2012-10-26 13:40 ` [PATCH 2/2] dvb: or51211: apply pr_fmt and use pr_* macros instead of printk Andy Shevchenko 0 siblings, 1 reply; 3+ messages in thread From: Andy Shevchenko @ 2012-10-26 13:40 UTC (permalink / raw) To: Mauro Carvalho Chehab, linux-media; +Cc: Andy Shevchenko Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- drivers/media/dvb-frontends/ix2505v.c | 2 +- drivers/media/dvb-frontends/or51211.c | 5 +---- 2 files changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/media/dvb-frontends/ix2505v.c b/drivers/media/dvb-frontends/ix2505v.c index bc5a820..0e3387e 100644 --- a/drivers/media/dvb-frontends/ix2505v.c +++ b/drivers/media/dvb-frontends/ix2505v.c @@ -212,7 +212,7 @@ static int ix2505v_set_params(struct dvb_frontend *fe) lpf = 0xb; deb_info("Osc=%x b_w=%x lpf=%x\n", local_osc, b_w, lpf); - deb_info("Data 0=[%x%x%x%x]\n", data[0], data[1], data[2], data[3]); + deb_info("Data 0=[%4phN]\n", data); if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); diff --git a/drivers/media/dvb-frontends/or51211.c b/drivers/media/dvb-frontends/or51211.c index c625b57..1af997e 100644 --- a/drivers/media/dvb-frontends/or51211.c +++ b/drivers/media/dvb-frontends/or51211.c @@ -471,10 +471,7 @@ static int or51211_init(struct dvb_frontend* fe) i--; } } - dprintk("read_fwbits %x %x %x %x %x %x %x %x %x %x\n", - rec_buf[0], rec_buf[1], rec_buf[2], rec_buf[3], - rec_buf[4], rec_buf[5], rec_buf[6], rec_buf[7], - rec_buf[8], rec_buf[9]); + dprintk("read_fwbits %10ph\n", rec_buf); printk(KERN_INFO "or51211: ver TU%02x%02x%02x VSB mode %02x" " Status %02x\n", -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH 2/2] dvb: or51211: apply pr_fmt and use pr_* macros instead of printk 2012-10-26 13:40 [PATCH 1/2] dvb-frontends: use %*ph[N] to dump small buffers Andy Shevchenko @ 2012-10-26 13:40 ` Andy Shevchenko 0 siblings, 0 replies; 3+ messages in thread From: Andy Shevchenko @ 2012-10-26 13:40 UTC (permalink / raw) To: Mauro Carvalho Chehab, linux-media; +Cc: Andy Shevchenko Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- drivers/media/dvb-frontends/or51211.c | 94 +++++++++++++++------------------ 1 file changed, 43 insertions(+), 51 deletions(-) diff --git a/drivers/media/dvb-frontends/or51211.c b/drivers/media/dvb-frontends/or51211.c index 1af997e..9db8008 100644 --- a/drivers/media/dvb-frontends/or51211.c +++ b/drivers/media/dvb-frontends/or51211.c @@ -42,11 +42,11 @@ #include "dvb_frontend.h" #include "or51211.h" +#define pr_fmt(fmt) KBUILD_MODNAME ": %s: " fmt, __func__ + static int debug; #define dprintk(args...) \ - do { \ - if (debug) printk(KERN_DEBUG "or51211: " args); \ - } while (0) + do { if (debug) pr_debug(args); } while (0) static u8 run_buf[] = {0x7f,0x01}; static u8 cmd_buf[] = {0x04,0x01,0x50,0x80,0x06}; // ATSC @@ -80,8 +80,7 @@ static int i2c_writebytes (struct or51211_state* state, u8 reg, const u8 *buf, msg.buf = (u8 *)buf; if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { - printk(KERN_WARNING "or51211: i2c_writebytes error " - "(addr %02x, err == %i)\n", reg, err); + pr_warn("error (addr %02x, err == %i)\n", reg, err); return -EREMOTEIO; } @@ -98,8 +97,7 @@ static int i2c_readbytes(struct or51211_state *state, u8 reg, u8 *buf, int len) msg.buf = buf; if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { - printk(KERN_WARNING "or51211: i2c_readbytes error " - "(addr %02x, err == %i)\n", reg, err); + pr_warn("error (addr %02x, err == %i)\n", reg, err); return -EREMOTEIO; } @@ -118,11 +116,11 @@ static int or51211_load_firmware (struct dvb_frontend* fe, /* Get eprom data */ tudata[0] = 17; if (i2c_writebytes(state,0x50,tudata,1)) { - printk(KERN_WARNING "or51211:load_firmware error eprom addr\n"); + pr_warn("error eprom addr\n"); return -1; } if (i2c_readbytes(state,0x50,&tudata[145],192)) { - printk(KERN_WARNING "or51211: load_firmware error eprom\n"); + pr_warn("error eprom\n"); return -1; } @@ -136,32 +134,32 @@ static int or51211_load_firmware (struct dvb_frontend* fe, state->config->reset(fe); if (i2c_writebytes(state,state->config->demod_address,tudata,585)) { - printk(KERN_WARNING "or51211: load_firmware error 1\n"); + pr_warn("error 1\n"); return -1; } msleep(1); if (i2c_writebytes(state,state->config->demod_address, &fw->data[393],8125)) { - printk(KERN_WARNING "or51211: load_firmware error 2\n"); + pr_warn("error 2\n"); return -1; } msleep(1); if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) { - printk(KERN_WARNING "or51211: load_firmware error 3\n"); + pr_warn("error 3\n"); return -1; } /* Wait at least 5 msec */ msleep(10); if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) { - printk(KERN_WARNING "or51211: load_firmware error 4\n"); + pr_warn("error 4\n"); return -1; } msleep(10); - printk("or51211: Done.\n"); + pr_info("Done.\n"); return 0; }; @@ -173,14 +171,14 @@ static int or51211_setmode(struct dvb_frontend* fe, int mode) state->config->setmode(fe, mode); if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) { - printk(KERN_WARNING "or51211: setmode error 1\n"); + pr_warn("error 1\n"); return -1; } /* Wait at least 5 msec */ msleep(10); if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) { - printk(KERN_WARNING "or51211: setmode error 2\n"); + pr_warn("error 2\n"); return -1; } @@ -196,7 +194,7 @@ static int or51211_setmode(struct dvb_frontend* fe, int mode) * normal +/-150kHz Carrier acquisition range */ if (i2c_writebytes(state,state->config->demod_address,cmd_buf,3)) { - printk(KERN_WARNING "or51211: setmode error 3\n"); + pr_warn("error 3\n"); return -1; } @@ -206,14 +204,14 @@ static int or51211_setmode(struct dvb_frontend* fe, int mode) rec_buf[3] = 0x00; msleep(20); if (i2c_writebytes(state,state->config->demod_address,rec_buf,3)) { - printk(KERN_WARNING "or51211: setmode error 5\n"); + pr_warn("error 5\n"); } msleep(3); if (i2c_readbytes(state,state->config->demod_address,&rec_buf[10],2)) { - printk(KERN_WARNING "or51211: setmode error 6"); + pr_warn("error 6\n"); return -1; } - dprintk("setmode rec status %02x %02x\n",rec_buf[10],rec_buf[11]); + dprintk("rec status %02x %02x\n", rec_buf[10], rec_buf[11]); return 0; } @@ -248,15 +246,15 @@ static int or51211_read_status(struct dvb_frontend* fe, fe_status_t* status) /* Receiver Status */ if (i2c_writebytes(state,state->config->demod_address,snd_buf,3)) { - printk(KERN_WARNING "or51132: read_status write error\n"); + pr_warn("write error\n"); return -1; } msleep(3); if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) { - printk(KERN_WARNING "or51132: read_status read error\n"); + pr_warn("read error\n"); return -1; } - dprintk("read_status %x %x\n",rec_buf[0],rec_buf[1]); + dprintk("%x %x\n", rec_buf[0], rec_buf[1]); if (rec_buf[0] & 0x01) { /* Receiver Lock */ *status |= FE_HAS_SIGNAL; @@ -306,20 +304,18 @@ static int or51211_read_snr(struct dvb_frontend* fe, u16* snr) snd_buf[2] = 0x04; if (i2c_writebytes(state,state->config->demod_address,snd_buf,3)) { - printk(KERN_WARNING "%s: error writing snr reg\n", - __func__); + pr_warn("error writing snr reg\n"); return -1; } if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) { - printk(KERN_WARNING "%s: read_status read error\n", - __func__); + pr_warn("read_status read error\n"); return -1; } state->snr = calculate_snr(rec_buf[0], 89599047); *snr = (state->snr) >> 16; - dprintk("%s: noise = 0x%02x, snr = %d.%02d dB\n", __func__, rec_buf[0], + dprintk("noise = 0x%02x, snr = %d.%02d dB\n", rec_buf[0], state->snr >> 24, (((state->snr>>8) & 0xffff) * 100) >> 16); return 0; @@ -375,25 +371,24 @@ static int or51211_init(struct dvb_frontend* fe) if (!state->initialized) { /* Request the firmware, this will block until it uploads */ - printk(KERN_INFO "or51211: Waiting for firmware upload " - "(%s)...\n", OR51211_DEFAULT_FIRMWARE); + pr_info("Waiting for firmware upload (%s)...\n", + OR51211_DEFAULT_FIRMWARE); ret = config->request_firmware(fe, &fw, OR51211_DEFAULT_FIRMWARE); - printk(KERN_INFO "or51211:Got Hotplug firmware\n"); + pr_info("Got Hotplug firmware\n"); if (ret) { - printk(KERN_WARNING "or51211: No firmware uploaded " - "(timeout or file not found?)\n"); + pr_warn("No firmware uploaded " + "(timeout or file not found?)\n"); return ret; } ret = or51211_load_firmware(fe, fw); release_firmware(fw); if (ret) { - printk(KERN_WARNING "or51211: Writing firmware to " - "device failed!\n"); + pr_warn("Writing firmware to device failed!\n"); return ret; } - printk(KERN_INFO "or51211: Firmware upload complete.\n"); + pr_info("Firmware upload complete.\n"); /* Set operation mode in Receiver 1 register; * type 1: @@ -406,7 +401,7 @@ static int or51211_init(struct dvb_frontend* fe) */ if (i2c_writebytes(state,state->config->demod_address, cmd_buf,3)) { - printk(KERN_WARNING "or51211: Load DVR Error 5\n"); + pr_warn("Load DVR Error 5\n"); return -1; } @@ -419,13 +414,13 @@ static int or51211_init(struct dvb_frontend* fe) msleep(30); if (i2c_writebytes(state,state->config->demod_address, rec_buf,3)) { - printk(KERN_WARNING "or51211: Load DVR Error A\n"); + pr_warn("Load DVR Error A\n"); return -1; } msleep(3); if (i2c_readbytes(state,state->config->demod_address, &rec_buf[10],2)) { - printk(KERN_WARNING "or51211: Load DVR Error B\n"); + pr_warn("Load DVR Error B\n"); return -1; } @@ -436,13 +431,13 @@ static int or51211_init(struct dvb_frontend* fe) msleep(20); if (i2c_writebytes(state,state->config->demod_address, rec_buf,3)) { - printk(KERN_WARNING "or51211: Load DVR Error C\n"); + pr_warn("Load DVR Error C\n"); return -1; } msleep(3); if (i2c_readbytes(state,state->config->demod_address, &rec_buf[12],2)) { - printk(KERN_WARNING "or51211: Load DVR Error D\n"); + pr_warn("Load DVR Error D\n"); return -1; } @@ -454,16 +449,14 @@ static int or51211_init(struct dvb_frontend* fe) get_ver_buf[4] = i+1; if (i2c_writebytes(state,state->config->demod_address, get_ver_buf,5)) { - printk(KERN_WARNING "or51211:Load DVR Error 6" - " - %d\n",i); + pr_warn("Load DVR Error 6 - %d\n", i); return -1; } msleep(3); if (i2c_readbytes(state,state->config->demod_address, &rec_buf[i*2],2)) { - printk(KERN_WARNING "or51211:Load DVR Error 7" - " - %d\n",i); + pr_warn("Load DVR Error 7 - %d\n", i); return -1; } /* If we didn't receive the right index, try again */ @@ -473,10 +466,9 @@ static int or51211_init(struct dvb_frontend* fe) } dprintk("read_fwbits %10ph\n", rec_buf); - printk(KERN_INFO "or51211: ver TU%02x%02x%02x VSB mode %02x" - " Status %02x\n", - rec_buf[2], rec_buf[4],rec_buf[6], - rec_buf[12],rec_buf[10]); + pr_info("ver TU%02x%02x%02x VSB mode %02x Status %02x\n", + rec_buf[2], rec_buf[4], rec_buf[6], rec_buf[12], + rec_buf[10]); rec_buf[0] = 0x04; rec_buf[1] = 0x00; @@ -485,13 +477,13 @@ static int or51211_init(struct dvb_frontend* fe) msleep(20); if (i2c_writebytes(state,state->config->demod_address, rec_buf,3)) { - printk(KERN_WARNING "or51211: Load DVR Error 8\n"); + pr_warn("Load DVR Error 8\n"); return -1; } msleep(20); if (i2c_readbytes(state,state->config->demod_address, &rec_buf[8],2)) { - printk(KERN_WARNING "or51211: Load DVR Error 9\n"); + pr_warn("Load DVR Error 9\n"); return -1; } state->initialized = 1; -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-11-28 9:32 UTC | newest] Thread overview: 3+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2012-11-28 9:32 [PATCH 1/2] dvb-frontends: use %*ph[N] to dump small buffers Andy Shevchenko 2012-11-28 9:32 ` [PATCH 2/2] dvb: or51211: apply pr_fmt and use pr_* macros instead of printk Andy Shevchenko -- strict thread matches above, loose matches on Subject: below -- 2012-10-26 13:40 [PATCH 1/2] dvb-frontends: use %*ph[N] to dump small buffers Andy Shevchenko 2012-10-26 13:40 ` [PATCH 2/2] dvb: or51211: apply pr_fmt and use pr_* macros instead of printk Andy Shevchenko
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.