All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tanya Brokhman <tlinder@codeaurora.org>
To: jaxboe@fusionio.com
Cc: linux-arm-msm@vger.kernel.org, philippedeswert@gmail.com,
	jengelh@inai.de, jh80.chung@samsung.com, tgih.jun@samsung.com,
	arnd.bergmann@linaro.org, venkat@linaro.org,
	linux-mmc@vger.kernel.org,
	Tanya Brokhman <tlinder@codeaurora.org>,
	open list <linux-kernel@vger.kernel.org>
Subject: [PATCH/RESEND v3 2/2] row: Add support for urgent request handling
Date: Tue, 11 Dec 2012 15:43:20 +0200	[thread overview]
Message-ID: <1355233400-26269-3-git-send-email-tlinder@codeaurora.org> (raw)
In-Reply-To: <1355233400-26269-1-git-send-email-tlinder@codeaurora.org>

This patch add support for handling urgent requests.
ROW queue can be marked as "urgent". If an urgent queue was
un-served in a previous dispatch cycle and a request was added
to it - it will trigger issuing urgent request to the device driver.

Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>

diff --git a/block/row-iosched.c b/block/row-iosched.c
index b3204d6..41cc028 100644
--- a/block/row-iosched.c
+++ b/block/row-iosched.c
@@ -58,6 +58,17 @@ static const bool queue_idling_enabled[] = {
 	false,	/* ROWQ_PRIO_LOW_SWRITE */
 };
 
+/* Flags indicating whether the queue can notify on urgent requests */
+static const bool urgent_queues[] = {
+	true,	/* ROWQ_PRIO_HIGH_READ */
+	true,	/* ROWQ_PRIO_REG_READ */
+	false,	/* ROWQ_PRIO_HIGH_SWRITE */
+	false,	/* ROWQ_PRIO_REG_SWRITE */
+	false,	/* ROWQ_PRIO_REG_WRITE */
+	false,	/* ROWQ_PRIO_LOW_READ */
+	false,	/* ROWQ_PRIO_LOW_SWRITE */
+};
+
 /* Default values for row queues quantums in each dispatch cycle */
 static const int queue_quantum[] = {
 	100,	/* ROWQ_PRIO_HIGH_READ */
@@ -271,7 +282,13 @@ static void row_add_request(struct request_queue *q,
 
 		rqueue->idle_data.last_insert_time = ktime_get();
 	}
-	row_log_rowq(rd, rqueue->prio, "added request");
+	if (urgent_queues[rqueue->prio] &&
+	    row_rowq_unserved(rd, rqueue->prio)) {
+		row_log_rowq(rd, rqueue->prio,
+			     "added urgent req curr_queue = %d",
+			     rd->curr_queue);
+	} else
+		row_log_rowq(rd, rqueue->prio, "added request");
 }
 
 /**
@@ -306,6 +323,29 @@ static int row_reinsert_req(struct request_queue *q,
 	return 0;
 }
 
+/*
+ * row_urgent_pending() - Return TRUE if there is an urgent
+ *			  request on scheduler
+ * @q:	requests queue
+ *
+ */
+static bool row_urgent_pending(struct request_queue *q)
+{
+	struct row_data *rd = q->elevator->elevator_data;
+	int i;
+
+	for (i = 0; i < ROWQ_MAX_PRIO; i++)
+		if (urgent_queues[i] && row_rowq_unserved(rd, i) &&
+		    !list_empty(&rd->row_queues[i].rqueue.fifo)) {
+			row_log_rowq(rd, i,
+				     "Urgent request pending (curr=%i)",
+				     rd->curr_queue);
+			return true;
+		}
+
+	return false;
+}
+
 /**
  * row_remove_request() -  Remove given request from scheduler
  * @q:	requests queue
@@ -697,6 +737,7 @@ static struct elevator_type iosched_row = {
 		.elevator_dispatch_fn		= row_dispatch_requests,
 		.elevator_add_req_fn		= row_add_request,
 		.elevator_reinsert_req_fn	= row_reinsert_req,
+		.elevator_is_urgent_fn		= row_urgent_pending,
 		.elevator_former_req_fn		= elv_rb_former_request,
 		.elevator_latter_req_fn		= elv_rb_latter_request,
 		.elevator_set_req_fn		= row_set_request,
-- 
1.7.6
--
QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. 
Is a member of Code Aurora Forum, hosted by the Linux Foundation

WARNING: multiple messages have this Message-ID (diff)
From: Tanya Brokhman <tlinder@codeaurora.org>
To: jaxboe@fusionio.com
Cc: linux-arm-msm@vger.kernel.org, philippedeswert@gmail.com,
	jengelh@inai.de, jh80.chung@samsung.com, tgih.jun@samsung.com,
	arnd.bergmann@linaro.org, venkat@linaro.org,
	linux-mmc@vger.kernel.org,
	Tanya Brokhman <tlinder@codeaurora.org>,
	linux-kernel@vger.kernel.org (open list)
Subject: [PATCH/RESEND v3 2/2] row: Add support for urgent request handling
Date: Tue, 11 Dec 2012 15:43:20 +0200	[thread overview]
Message-ID: <1355233400-26269-3-git-send-email-tlinder@codeaurora.org> (raw)
In-Reply-To: <1355233400-26269-1-git-send-email-tlinder@codeaurora.org>

This patch add support for handling urgent requests.
ROW queue can be marked as "urgent". If an urgent queue was
un-served in a previous dispatch cycle and a request was added
to it - it will trigger issuing urgent request to the device driver.

Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>

diff --git a/block/row-iosched.c b/block/row-iosched.c
index b3204d6..41cc028 100644
--- a/block/row-iosched.c
+++ b/block/row-iosched.c
@@ -58,6 +58,17 @@ static const bool queue_idling_enabled[] = {
 	false,	/* ROWQ_PRIO_LOW_SWRITE */
 };
 
+/* Flags indicating whether the queue can notify on urgent requests */
+static const bool urgent_queues[] = {
+	true,	/* ROWQ_PRIO_HIGH_READ */
+	true,	/* ROWQ_PRIO_REG_READ */
+	false,	/* ROWQ_PRIO_HIGH_SWRITE */
+	false,	/* ROWQ_PRIO_REG_SWRITE */
+	false,	/* ROWQ_PRIO_REG_WRITE */
+	false,	/* ROWQ_PRIO_LOW_READ */
+	false,	/* ROWQ_PRIO_LOW_SWRITE */
+};
+
 /* Default values for row queues quantums in each dispatch cycle */
 static const int queue_quantum[] = {
 	100,	/* ROWQ_PRIO_HIGH_READ */
@@ -271,7 +282,13 @@ static void row_add_request(struct request_queue *q,
 
 		rqueue->idle_data.last_insert_time = ktime_get();
 	}
-	row_log_rowq(rd, rqueue->prio, "added request");
+	if (urgent_queues[rqueue->prio] &&
+	    row_rowq_unserved(rd, rqueue->prio)) {
+		row_log_rowq(rd, rqueue->prio,
+			     "added urgent req curr_queue = %d",
+			     rd->curr_queue);
+	} else
+		row_log_rowq(rd, rqueue->prio, "added request");
 }
 
 /**
@@ -306,6 +323,29 @@ static int row_reinsert_req(struct request_queue *q,
 	return 0;
 }
 
+/*
+ * row_urgent_pending() - Return TRUE if there is an urgent
+ *			  request on scheduler
+ * @q:	requests queue
+ *
+ */
+static bool row_urgent_pending(struct request_queue *q)
+{
+	struct row_data *rd = q->elevator->elevator_data;
+	int i;
+
+	for (i = 0; i < ROWQ_MAX_PRIO; i++)
+		if (urgent_queues[i] && row_rowq_unserved(rd, i) &&
+		    !list_empty(&rd->row_queues[i].rqueue.fifo)) {
+			row_log_rowq(rd, i,
+				     "Urgent request pending (curr=%i)",
+				     rd->curr_queue);
+			return true;
+		}
+
+	return false;
+}
+
 /**
  * row_remove_request() -  Remove given request from scheduler
  * @q:	requests queue
@@ -697,6 +737,7 @@ static struct elevator_type iosched_row = {
 		.elevator_dispatch_fn		= row_dispatch_requests,
 		.elevator_add_req_fn		= row_add_request,
 		.elevator_reinsert_req_fn	= row_reinsert_req,
+		.elevator_is_urgent_fn		= row_urgent_pending,
 		.elevator_former_req_fn		= elv_rb_former_request,
 		.elevator_latter_req_fn		= elv_rb_latter_request,
 		.elevator_set_req_fn		= row_set_request,
-- 
1.7.6
--
QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. 
Is a member of Code Aurora Forum, hosted by the Linux Foundation

  parent reply	other threads:[~2012-12-11 13:43 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-12-11 13:43 [PATCH v3 0/2] block:row: Adding support for urgent requests handling Tanya Brokhman
2012-12-11 13:43 ` [PATCH v3 1/2] row: Adding support for reinsert already dispatched req Tanya Brokhman
2012-12-11 13:43   ` Tanya Brokhman
2012-12-11 13:43 ` Tanya Brokhman [this message]
2012-12-11 13:43   ` [PATCH/RESEND v3 2/2] row: Add support for urgent request handling Tanya Brokhman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1355233400-26269-3-git-send-email-tlinder@codeaurora.org \
    --to=tlinder@codeaurora.org \
    --cc=arnd.bergmann@linaro.org \
    --cc=jaxboe@fusionio.com \
    --cc=jengelh@inai.de \
    --cc=jh80.chung@samsung.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=philippedeswert@gmail.com \
    --cc=tgih.jun@samsung.com \
    --cc=venkat@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.