All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jon Hunter <jon-hunter@ti.com>
To: Russell King <linux@arm.linux.org.uk>,
	Will Deacon <will.deacon@arm.com>,
	Grant Likely <grant.likely@secretlab.ca>,
	Rob Herring <rob.herring@calxeda.com>
Cc: device-tree <devicetree-discuss@lists.ozlabs.org>,
	linux-omap <linux-omap@vger.kernel.org>,
	linux-arm <linux-arm-kernel@lists.infradead.org>,
	Paul Walmsley <paul@pwsan.com>,
	Pratik Patel <pratikp@codeaurora.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Ming Lei <ming.lei@canonical.com>, Jon Hunter <jon-hunter@ti.com>
Subject: [RFC 0/5] ARM: Add Cross Trigger Interface driver
Date: Wed, 12 Dec 2012 15:43:03 -0600	[thread overview]
Message-ID: <1355348588-22318-1-git-send-email-jon-hunter@ti.com> (raw)

Adds AMBA driver for ARM Coresight Cross Trigger Interface (CTI) driver
and device-tree binding for CTI module.

I have tested the driver on an OMAP4430 device and include the relevant
patches needed to enable CTI on OMAP4 devices for reference.

I would like to get some feedback on the binding, CTI APIs and usage of
the APB clock for OMAP4. I have seen that there has been some recent
discussion around adding other coresight drivers for ARM devices [1]
and so it would be also good to align on the appropriate location for
coresight drivers in general.

This series is based on the ARM-SOC for-next branch and Will Deacon's
patch for the CTI lock registers [2].

[1] http://article.gmane.org/gmane.linux.ports.arm.kernel/204591/match=coresight+bus
[2] http://article.gmane.org/gmane.linux.ports.arm.kernel/200199/match=fix+manipulation+debug+lock+register

Jon Hunter (5):
  ARM: CORESIGHT: Add generic lock/unlock helpers
  ARM: dts: Add Cross Trigger Interface binding
  ARM: CTI: Convert CTI helpers to AMBA bus driver
  ARM: dts: OMAP4: Add CTI nodes
  ARM: OMAP4: Add AMBA APB Clock

 Documentation/devicetree/bindings/arm/cti.txt |   32 +++
 arch/arm/boot/dts/omap4.dtsi                  |   23 ++
 arch/arm/include/asm/cti.h                    |  163 --------------
 arch/arm/include/asm/hardware/coresight.h     |   16 +-
 arch/arm/mach-omap2/cclock44xx_data.c         |    1 +
 drivers/Kconfig                               |    2 +
 drivers/amba/Kconfig                          |   20 ++
 drivers/amba/Makefile                         |    1 +
 drivers/amba/cti.c                            |  284 +++++++++++++++++++++++++
 include/linux/amba/cti.h                      |   82 +++++++
 10 files changed, 453 insertions(+), 171 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/cti.txt
 delete mode 100644 arch/arm/include/asm/cti.h
 create mode 100644 drivers/amba/Kconfig
 create mode 100644 drivers/amba/cti.c
 create mode 100644 include/linux/amba/cti.h

-- 
1.7.10.4


WARNING: multiple messages have this Message-ID (diff)
From: jon-hunter@ti.com (Jon Hunter)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC 0/5] ARM: Add Cross Trigger Interface driver
Date: Wed, 12 Dec 2012 15:43:03 -0600	[thread overview]
Message-ID: <1355348588-22318-1-git-send-email-jon-hunter@ti.com> (raw)

Adds AMBA driver for ARM Coresight Cross Trigger Interface (CTI) driver
and device-tree binding for CTI module.

I have tested the driver on an OMAP4430 device and include the relevant
patches needed to enable CTI on OMAP4 devices for reference.

I would like to get some feedback on the binding, CTI APIs and usage of
the APB clock for OMAP4. I have seen that there has been some recent
discussion around adding other coresight drivers for ARM devices [1]
and so it would be also good to align on the appropriate location for
coresight drivers in general.

This series is based on the ARM-SOC for-next branch and Will Deacon's
patch for the CTI lock registers [2].

[1] http://article.gmane.org/gmane.linux.ports.arm.kernel/204591/match=coresight+bus
[2] http://article.gmane.org/gmane.linux.ports.arm.kernel/200199/match=fix+manipulation+debug+lock+register

Jon Hunter (5):
  ARM: CORESIGHT: Add generic lock/unlock helpers
  ARM: dts: Add Cross Trigger Interface binding
  ARM: CTI: Convert CTI helpers to AMBA bus driver
  ARM: dts: OMAP4: Add CTI nodes
  ARM: OMAP4: Add AMBA APB Clock

 Documentation/devicetree/bindings/arm/cti.txt |   32 +++
 arch/arm/boot/dts/omap4.dtsi                  |   23 ++
 arch/arm/include/asm/cti.h                    |  163 --------------
 arch/arm/include/asm/hardware/coresight.h     |   16 +-
 arch/arm/mach-omap2/cclock44xx_data.c         |    1 +
 drivers/Kconfig                               |    2 +
 drivers/amba/Kconfig                          |   20 ++
 drivers/amba/Makefile                         |    1 +
 drivers/amba/cti.c                            |  284 +++++++++++++++++++++++++
 include/linux/amba/cti.h                      |   82 +++++++
 10 files changed, 453 insertions(+), 171 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/cti.txt
 delete mode 100644 arch/arm/include/asm/cti.h
 create mode 100644 drivers/amba/Kconfig
 create mode 100644 drivers/amba/cti.c
 create mode 100644 include/linux/amba/cti.h

-- 
1.7.10.4

             reply	other threads:[~2012-12-12 21:44 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-12-12 21:43 Jon Hunter [this message]
2012-12-12 21:43 ` [RFC 0/5] ARM: Add Cross Trigger Interface driver Jon Hunter
     [not found] ` <1355348588-22318-1-git-send-email-jon-hunter-l0cyMroinI0@public.gmane.org>
2012-12-12 21:43   ` [RFC 1/5] ARM: CORESIGHT: Add generic lock/unlock helpers Jon Hunter
2012-12-12 21:43     ` Jon Hunter
     [not found]     ` <1355348588-22318-2-git-send-email-jon-hunter-l0cyMroinI0@public.gmane.org>
2012-12-13 14:58       ` Will Deacon
2012-12-13 14:58         ` Will Deacon
     [not found]         ` <20121213145803.GL26540-MRww78TxoiP5vMa5CHWGZ34zcgK1vI+I0E9HWUfgJXw@public.gmane.org>
2012-12-13 19:18           ` Jon Hunter
2012-12-13 19:18             ` Jon Hunter
2012-12-13 19:36             ` Jean Pihet
2012-12-13 19:36               ` Jean Pihet
2012-12-12 21:43   ` [RFC 4/5] ARM: dts: OMAP4: Add CTI nodes Jon Hunter
2012-12-12 21:43     ` Jon Hunter
2012-12-12 21:43 ` [RFC 2/5] ARM: dts: Add Cross Trigger Interface binding Jon Hunter
2012-12-12 21:43   ` Jon Hunter
2012-12-12 22:12   ` Rob Herring
2012-12-12 22:12     ` Rob Herring
2012-12-12 23:23     ` Jon Hunter
2012-12-12 23:23       ` Jon Hunter
2012-12-14 19:53       ` Rob Herring
2012-12-14 19:53         ` Rob Herring
2012-12-13 17:41   ` Will Deacon
2012-12-13 17:41     ` Will Deacon
2012-12-13 19:21     ` Jon Hunter
2012-12-13 19:21       ` Jon Hunter
2012-12-17 16:20       ` Mark Rutland
2012-12-17 16:20         ` Mark Rutland
2012-12-17 16:30         ` Jon Hunter
2012-12-17 16:30           ` Jon Hunter
2012-12-12 21:43 ` [RFC 3/5] ARM: CTI: Convert CTI helpers to AMBA bus driver Jon Hunter
2012-12-12 21:43   ` Jon Hunter
2012-12-13 15:08   ` Will Deacon
2012-12-13 15:08     ` Will Deacon
     [not found]     ` <20121213150826.GM26540-MRww78TxoiP5vMa5CHWGZ34zcgK1vI+I0E9HWUfgJXw@public.gmane.org>
2012-12-13 19:35       ` Jon Hunter
2012-12-13 19:35         ` Jon Hunter
2012-12-21 22:27   ` Pratik Patel
2012-12-21 22:27     ` Pratik Patel
2012-12-21 22:35     ` Pratik Patel
2012-12-21 22:35       ` Pratik Patel
2013-01-02 19:13       ` Jon Hunter
2013-01-02 19:13         ` Jon Hunter
2013-01-02 19:23     ` Jon Hunter
2013-01-02 19:23       ` Jon Hunter
2013-01-03 18:47       ` Pratik Patel
2013-01-03 18:47         ` Pratik Patel
2012-12-12 21:43 ` [RFC 5/5] ARM: OMAP4: Add AMBA APB Clock Jon Hunter
2012-12-12 21:43   ` Jon Hunter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1355348588-22318-1-git-send-email-jon-hunter@ti.com \
    --to=jon-hunter@ti.com \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=grant.likely@secretlab.ca \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=ming.lei@canonical.com \
    --cc=paul@pwsan.com \
    --cc=pratikp@codeaurora.org \
    --cc=rob.herring@calxeda.com \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.