[PATCH V2 1/2] ARM: OMAP2+: Prepare for device-tree PMU support

[Jon Hunter <jon-hunter@ti.com>]

If device-tree is present, then do not create the PMU device from within
the OMAP specific PMU code. This is required to allow device-tree to
create the PMU device from the PMU device-tree node.

PMU is not currently supported for OMAP4430 (due to a dependency on
having a cross-trigger interface driver) and so ensure that this
indicated on boot with or without device-tree.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
---
 arch/arm/mach-omap2/pmu.c |   14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-omap2/pmu.c b/arch/arm/mach-omap2/pmu.c
index eb78ae7..1a0799c 100644
--- a/arch/arm/mach-omap2/pmu.c
+++ b/arch/arm/mach-omap2/pmu.c
@@ -11,6 +11,8 @@
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  */
+#include <linux/of.h>
+
 #include <asm/pmu.h>
 
 #include "soc.h"
@@ -64,6 +66,15 @@ static int __init omap_init_pmu(void)
 	unsigned oh_num;
 	char **oh_names;
 
+	/* XXX Remove this check when the CTI driver is available */
+	if (cpu_is_omap443x()) {
+		pr_info("ARM PMU: not yet supported on OMAP4430 due to missing CTI driver\n");
+		return 0;
+	}
+
+	if (of_have_populated_dt())
+		return 0;
+
 	/*
 	 * To create an ARM-PMU device the following HWMODs
 	 * are required for the various OMAP2+ devices.
@@ -76,9 +87,6 @@ static int __init omap_init_pmu(void)
 	if (cpu_is_omap443x()) {
 		oh_num = ARRAY_SIZE(omap4430_pmu_oh_names);
 		oh_names = omap4430_pmu_oh_names;
-		/* XXX Remove the next two lines when CTI driver available */
-		pr_info("ARM PMU: not yet supported on OMAP4430 due to missing CTI driver\n");
-		return 0;
 	} else if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
 		oh_num = ARRAY_SIZE(omap3_pmu_oh_names);
 		oh_names = omap3_pmu_oh_names;
-- 
1.7.10.4