From: Egbert Eich <eich@suse.de>
To: intel-gfx@lists.freedesktop.org
Cc: Egbert Eich <eich@suse.de>,
Daniel Vetter <daniel.vetter@intel.com>,
Chris Wilson <chris.wilson@intel.com>,
Rodrigo Vivi <rodrigo.vivi@intel.com>
Subject: [PATCH 5/8] drm/i915: Move hotplug interrupt enable for i915/i965/valleyview into a separate function.
Date: Thu, 10 Jan 2013 10:02:43 -0500 [thread overview]
Message-ID: <1357830166-18049-6-git-send-email-eich@suse.de> (raw)
In-Reply-To: <1357830166-18049-1-git-send-email-eich@suse.de>
Signed-off-by: Egbert Eich <eich@suse.de>
---
drivers/gpu/drm/i915/i915_irq.c | 178 ++++++++++++++++++++++----------------
1 files changed, 103 insertions(+), 75 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 4e75df0..356472f 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -567,6 +567,32 @@ static void gen6_queue_rps_work(struct drm_i915_private *dev_priv,
queue_work(dev_priv->wq, &dev_priv->rps.work);
}
+static void valleyview_enable_hotplug_irq(struct drm_device *dev)
+{
+ drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
+ hotplug_en &= ~(HDMIB_HOTPLUG_INT_EN | HDMIC_HOTPLUG_INT_EN |
+ HDMID_HOTPLUG_INT_EN | SDVOC_HOTPLUG_INT_EN |
+ SDVOB_HOTPLUG_INT_EN | CRT_HOTPLUG_INT_EN);
+
+ /* Note HDMI and DP share bits */
+ if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
+ hotplug_en |= HDMIB_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS)
+ hotplug_en |= HDMIC_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS)
+ hotplug_en |= HDMID_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_I915)
+ hotplug_en |= SDVOC_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_I915)
+ hotplug_en |= SDVOB_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
+ hotplug_en |= CRT_HOTPLUG_INT_EN;
+ hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
+ }
+ I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
+}
+
static irqreturn_t valleyview_irq_handler(int irq, void *arg)
{
struct drm_device *dev = (struct drm_device *) arg;
@@ -2020,7 +2046,6 @@ static int valleyview_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 enable_mask;
- u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
u32 pipestat_enable = PLANE_FLIP_DONE_INT_EN_VLV;
u32 render_irqs;
u16 msid;
@@ -2075,25 +2100,9 @@ static int valleyview_irq_postinstall(struct drm_device *dev)
I915_WRITE(DPINVGTT, DPINVGTT_STATUS_MASK);
I915_WRITE(DPINVGTT, DPINVGTT_EN_MASK);
#endif
-
I915_WRITE(VLV_MASTER_IER, MASTER_INTERRUPT_ENABLE);
- /* Note HDMI and DP share bits */
- if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
- hotplug_en |= HDMIB_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS)
- hotplug_en |= HDMIC_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS)
- hotplug_en |= HDMID_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_I915)
- hotplug_en |= SDVOC_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_I915)
- hotplug_en |= SDVOB_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
- hotplug_en |= CRT_HOTPLUG_INT_EN;
- hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
- }
- I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
+ valleyview_enable_hotplug_irq(dev);
return 0;
}
@@ -2298,6 +2307,34 @@ static void i915_irq_preinstall(struct drm_device * dev)
POSTING_READ(IER);
}
+static void i915_enable_hotplug_irq(struct drm_device *dev)
+{
+ drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
+ hotplug_en &= ~(HDMIB_HOTPLUG_INT_EN | HDMIC_HOTPLUG_INT_EN |
+ HDMID_HOTPLUG_INT_EN | SDVOC_HOTPLUG_INT_EN |
+ SDVOB_HOTPLUG_INT_EN | CRT_HOTPLUG_INT_EN);
+
+ if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
+ hotplug_en |= HDMIB_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS)
+ hotplug_en |= HDMIC_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS)
+ hotplug_en |= HDMID_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_I915)
+ hotplug_en |= SDVOC_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_I915)
+ hotplug_en |= SDVOB_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
+ hotplug_en |= CRT_HOTPLUG_INT_EN;
+ hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
+ }
+
+ /* Ignore TV since it's buggy */
+
+ I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
+}
+
static int i915_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
@@ -2335,28 +2372,8 @@ static int i915_irq_postinstall(struct drm_device *dev)
I915_WRITE(IER, enable_mask);
POSTING_READ(IER);
- if (I915_HAS_HOTPLUG(dev)) {
- u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
-
- if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
- hotplug_en |= HDMIB_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS)
- hotplug_en |= HDMIC_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS)
- hotplug_en |= HDMID_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_I915)
- hotplug_en |= SDVOC_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_I915)
- hotplug_en |= SDVOB_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
- hotplug_en |= CRT_HOTPLUG_INT_EN;
- hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
- }
-
- /* Ignore TV since it's buggy */
-
- I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
- }
+ if (I915_HAS_HOTPLUG(dev))
+ i915_enable_hotplug_irq(dev);
intel_opregion_enable_asle(dev);
@@ -2519,10 +2536,54 @@ static void i965_irq_preinstall(struct drm_device * dev)
POSTING_READ(IER);
}
-static int i965_irq_postinstall(struct drm_device *dev)
+static void i965_enable_hotplug_irq(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 hotplug_en;
+
+ hotplug_en = I915_READ(PORT_HOTPLUG_EN);
+ hotplug_en &= ~(HDMIB_HOTPLUG_INT_EN | HDMIC_HOTPLUG_INT_EN |
+ HDMID_HOTPLUG_INT_EN | SDVOC_HOTPLUG_INT_EN |
+ SDVOB_HOTPLUG_INT_EN | CRT_HOTPLUG_INT_EN);
+
+ /* Note HDMI and DP share hotplug bits */
+ if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
+ hotplug_en |= HDMIB_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS)
+ hotplug_en |= HDMIC_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS)
+ hotplug_en |= HDMID_HOTPLUG_INT_EN;
+ if (IS_G4X(dev)) {
+ if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_G4X)
+ hotplug_en |= SDVOC_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_G4X)
+ hotplug_en |= SDVOB_HOTPLUG_INT_EN;
+ } else {
+ if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_I965)
+ hotplug_en |= SDVOC_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_I965)
+ hotplug_en |= SDVOB_HOTPLUG_INT_EN;
+ }
+ if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
+ hotplug_en |= CRT_HOTPLUG_INT_EN;
+
+ /* Programming the CRT detection parameters tends
+ to generate a spurious hotplug event about three
+ seconds later. So just do it once.
+ */
+ if (IS_G4X(dev))
+ hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
+ hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
+ }
+
+ /* Ignore TV since it's buggy */
+
+ I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
+}
+
+static int i965_irq_postinstall(struct drm_device *dev)
+{
+ drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 enable_mask;
u32 error_mask;
@@ -2563,40 +2624,7 @@ static int i965_irq_postinstall(struct drm_device *dev)
I915_WRITE(IER, enable_mask);
POSTING_READ(IER);
- /* Note HDMI and DP share hotplug bits */
- hotplug_en = 0;
- if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
- hotplug_en |= HDMIB_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS)
- hotplug_en |= HDMIC_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS)
- hotplug_en |= HDMID_HOTPLUG_INT_EN;
- if (IS_G4X(dev)) {
- if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_G4X)
- hotplug_en |= SDVOC_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_G4X)
- hotplug_en |= SDVOB_HOTPLUG_INT_EN;
- } else {
- if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_I965)
- hotplug_en |= SDVOC_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_I965)
- hotplug_en |= SDVOB_HOTPLUG_INT_EN;
- }
- if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
- hotplug_en |= CRT_HOTPLUG_INT_EN;
-
- /* Programming the CRT detection parameters tends
- to generate a spurious hotplug event about three
- seconds later. So just do it once.
- */
- if (IS_G4X(dev))
- hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
- hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
- }
-
- /* Ignore TV since it's buggy */
-
- I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
+ i965_enable_hotplug_irq(dev);
intel_opregion_enable_asle(dev);
--
1.7.7
next prev parent reply other threads:[~2013-01-10 15:04 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-10 15:02 [PATCH 0/8] Detect and deal with Interrupt 'Storms' from noisy Hotplug Lines Egbert Eich
2013-01-10 15:02 ` [PATCH 1/8] drm/i915: Remove pch_rq_mask from struct drm_i915_private Egbert Eich
2013-01-11 20:13 ` Daniel Vetter
2013-01-10 15:02 ` [PATCH 2/8] drm/i915: Set hotplug_supported_flag for all chipset generations Egbert Eich
2013-03-26 19:51 ` Jesse Barnes
2013-01-10 15:02 ` [PATCH 3/8] drm/i915: Add hpd status bit to struct intel_connector Egbert Eich
2013-03-26 19:53 ` Jesse Barnes
2013-01-10 15:02 ` [PATCH 4/8] drm/i915: Add Hotplug IRQ Storm detection Egbert Eich
2013-03-26 19:59 ` Jesse Barnes
2013-01-10 15:02 ` Egbert Eich [this message]
2013-03-26 20:04 ` [PATCH 5/8] drm/i915: Move hotplug interrupt enable for i915/i965/valleyview into a separate function Jesse Barnes
2013-01-10 15:02 ` [PATCH 6/8] drm/i915: Only enable hotplug irq when needed on Ironlake and later chips Egbert Eich
2013-01-10 15:02 ` [PATCH 7/8] drm/i915: When detecting a hotplug IRQ storm disable respective IRQs Egbert Eich
2013-01-10 15:02 ` [PATCH 8/8] drm/i915: Add Reenable Timer to turn Hotplug Detection back on Egbert Eich
2013-01-11 20:34 ` [PATCH 0/8] Detect and deal with Interrupt 'Storms' from noisy Hotplug Lines Daniel Vetter
2013-01-17 14:01 ` Egbert Eich
2013-01-17 14:45 ` Daniel Vetter
2013-01-22 13:22 ` Egbert Eich
2013-01-22 13:48 ` Daniel Vetter
2013-01-22 15:11 ` Egbert Eich
2013-02-25 17:06 ` [PATCH v.2 00/12] " Egbert Eich
2013-02-25 17:06 ` [PATCH v.2 01/12] DRM/i915: Remove valleyview_hpd_irq_setup Egbert Eich
2013-03-26 20:06 ` Jesse Barnes
2013-02-25 17:06 ` [PATCH v.2 02/12] DRM/I915: Add enum hpd_pin to intel_encoder Egbert Eich
2013-03-26 20:07 ` Jesse Barnes
2013-02-25 17:06 ` [PATCH v.2 03/12] DRM/i915: Convert HPD interrupts to make use of HPD pin assignment in encoders Egbert Eich
2013-02-28 0:12 ` Chris Wilson
2013-02-28 9:17 ` [PATCH v.2 03/12] DRM/i915: Convert HPD interrupts to make use of HPD pin assignment in encoders (v2) Egbert Eich
2013-03-26 20:08 ` [PATCH v.2 03/12] DRM/i915: Convert HPD interrupts to make use of HPD pin assignment in encoders Jesse Barnes
2013-02-25 17:06 ` [PATCH v.2 04/12] DRM/i915: Remove i965_hpd_irq_setup Egbert Eich
2013-02-25 17:06 ` [PATCH v.2 05/12] DRM/i915: Get rid if the 'hotplug_supported_mask' in struct drm_i915_private Egbert Eich
2013-03-26 21:06 ` Daniel Vetter
2013-03-27 15:08 ` Egbert Eich
2013-02-25 17:06 ` [PATCH v.2 06/12] DRM/i915: Add HPD IRQ storm detection Egbert Eich
2013-02-28 0:30 ` Chris Wilson
2013-02-28 9:19 ` [PATCH v.2 06/12] DRM/i915: Add HPD IRQ storm detection (v2) Egbert Eich
2013-03-03 18:07 ` Daniel Vetter
2013-03-05 7:38 ` [PATCH v.3 06/12] DRM/i915: Add HPD IRQ storm detection (v3) Egbert Eich
2013-03-05 7:48 ` [PATCH v.2 10/12] DRM/i915: Add Reenable Timer to turn Hotplug Detection back on (v2) Egbert Eich
2013-03-05 10:28 ` Ville Syrjälä
2013-03-05 12:26 ` [PATCH v.3 10/12] DRM/i915: Add Reenable Timer to turn Hotplug Detection back on (v3) Egbert Eich
2013-03-05 7:55 ` [PATCH v.2 11/12] DRM/i915: Add bit field to record which pins have received HPD events (v2) Egbert Eich
2013-03-05 13:00 ` [PATCH v.3 11/12] DRM/i915: Add bit field to record which pins have received HPD events (v3) Egbert Eich
2013-03-05 14:52 ` Egbert Eich
2013-02-25 17:06 ` [PATCH v.2 07/12] DRM/i915: (re)init HPD interrupt storm statistics Egbert Eich
2013-02-25 17:06 ` [PATCH v.2 08/12] DRM/i915: Treat hpd_irq_setup() for ironake and older generations the same way Egbert Eich
2013-02-25 17:06 ` [PATCH v.2 09/12] DRM/i915: Disable HPD interrupt on pin when irq storm is detected Egbert Eich
2013-03-05 12:34 ` [PATCH v.2 09/12] DRM/i915: Disable HPD interrupt on pin when irq storm is detected (v2) Egbert Eich
2013-02-25 17:06 ` [PATCH v.2 10/12] DRM/i915: Add Reenable Timer to turn Hotplug Detection back on Egbert Eich
2013-03-27 15:12 ` Daniel Vetter
2013-02-25 17:06 ` [PATCH v.2 11/12] DRM/i915: Add bit field to record which pins have received HPD events Egbert Eich
2013-02-25 17:06 ` [PATCH v.2 12/12] DRM/i915: Only reprobe display on encoder which has received an HPD event Egbert Eich
2013-03-05 14:18 ` [PATCH v.3 " Egbert Eich
2013-02-28 0:46 ` [PATCH v.2 00/12] Detect and deal with Interrupt 'Storms' from noisy Hotplug Lines Chris Wilson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1357830166-18049-6-git-send-email-eich@suse.de \
--to=eich@suse.de \
--cc=chris.wilson@intel.com \
--cc=daniel.vetter@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=rodrigo.vivi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.