From: Egbert Eich <eich@suse.de>
To: intel-gfx@lists.freedesktop.org
Cc: Egbert Eich <eich@suse.de>, Chris Wilson <chris.wilson@intel.com>,
Rodrigo Vivi <rodrigo.vivi@intel.com>
Subject: [PATCH v.2 08/12] DRM/i915: Treat hpd_irq_setup() for ironake and older generations the same way.
Date: Mon, 25 Feb 2013 12:06:55 -0500 [thread overview]
Message-ID: <1361812019-20099-9-git-send-email-eich@suse.de> (raw)
In-Reply-To: <1361812019-20099-1-git-send-email-eich@suse.de>
When switching to enabling HPD IRQs only for lines where needed and supported
this will ensure that the right lines will be enabled on all generations when
intel_hpd_init() is called.
Signed-off-by: Egbert Eich <eich@suse.de>
---
drivers/gpu/drm/i915/i915_irq.c | 10 +++++-----
1 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index d1ccff7..e0cf629 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -2033,7 +2033,7 @@ static void ibx_enable_hotplug(struct drm_device *dev)
I915_WRITE(PCH_PORT_HOTPLUG, hotplug);
}
-static void ibx_irq_postinstall(struct drm_device *dev)
+static void ibx_hpd_irq_setup(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
struct drm_mode_config *mode_config = &dev->mode_config;
@@ -2055,8 +2055,6 @@ static void ibx_irq_postinstall(struct drm_device *dev)
I915_WRITE(SDEIMR, ~mask);
I915_WRITE(SDEIER, mask);
POSTING_READ(SDEIER);
-
- ibx_enable_hotplug(dev);
}
static int ironlake_irq_postinstall(struct drm_device *dev)
@@ -2094,7 +2092,7 @@ static int ironlake_irq_postinstall(struct drm_device *dev)
I915_WRITE(GTIER, render_irqs);
POSTING_READ(GTIER);
- ibx_irq_postinstall(dev);
+ ibx_enable_hotplug(dev);
if (IS_IRONLAKE_M(dev)) {
/* Clear & enable PCU event interrupts */
@@ -2140,7 +2138,7 @@ static int ivybridge_irq_postinstall(struct drm_device *dev)
I915_WRITE(GTIER, render_irqs);
POSTING_READ(GTIER);
- ibx_irq_postinstall(dev);
+ ibx_enable_hotplug(dev);
return 0;
}
@@ -2884,6 +2882,7 @@ void intel_irq_init(struct drm_device *dev)
dev->driver->irq_uninstall = ironlake_irq_uninstall;
dev->driver->enable_vblank = ivybridge_enable_vblank;
dev->driver->disable_vblank = ivybridge_disable_vblank;
+ dev_priv->display.hpd_irq_setup = ibx_hpd_irq_setup;
} else if (HAS_PCH_SPLIT(dev)) {
dev->driver->irq_handler = ironlake_irq_handler;
dev->driver->irq_preinstall = ironlake_irq_preinstall;
@@ -2891,6 +2890,7 @@ void intel_irq_init(struct drm_device *dev)
dev->driver->irq_uninstall = ironlake_irq_uninstall;
dev->driver->enable_vblank = ironlake_enable_vblank;
dev->driver->disable_vblank = ironlake_disable_vblank;
+ dev_priv->display.hpd_irq_setup = ibx_hpd_irq_setup;
} else {
if (INTEL_INFO(dev)->gen == 2) {
dev->driver->irq_preinstall = i8xx_irq_preinstall;
--
1.7.7
next prev parent reply other threads:[~2013-02-25 18:06 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-10 15:02 [PATCH 0/8] Detect and deal with Interrupt 'Storms' from noisy Hotplug Lines Egbert Eich
2013-01-10 15:02 ` [PATCH 1/8] drm/i915: Remove pch_rq_mask from struct drm_i915_private Egbert Eich
2013-01-11 20:13 ` Daniel Vetter
2013-01-10 15:02 ` [PATCH 2/8] drm/i915: Set hotplug_supported_flag for all chipset generations Egbert Eich
2013-03-26 19:51 ` Jesse Barnes
2013-01-10 15:02 ` [PATCH 3/8] drm/i915: Add hpd status bit to struct intel_connector Egbert Eich
2013-03-26 19:53 ` Jesse Barnes
2013-01-10 15:02 ` [PATCH 4/8] drm/i915: Add Hotplug IRQ Storm detection Egbert Eich
2013-03-26 19:59 ` Jesse Barnes
2013-01-10 15:02 ` [PATCH 5/8] drm/i915: Move hotplug interrupt enable for i915/i965/valleyview into a separate function Egbert Eich
2013-03-26 20:04 ` Jesse Barnes
2013-01-10 15:02 ` [PATCH 6/8] drm/i915: Only enable hotplug irq when needed on Ironlake and later chips Egbert Eich
2013-01-10 15:02 ` [PATCH 7/8] drm/i915: When detecting a hotplug IRQ storm disable respective IRQs Egbert Eich
2013-01-10 15:02 ` [PATCH 8/8] drm/i915: Add Reenable Timer to turn Hotplug Detection back on Egbert Eich
2013-01-11 20:34 ` [PATCH 0/8] Detect and deal with Interrupt 'Storms' from noisy Hotplug Lines Daniel Vetter
2013-01-17 14:01 ` Egbert Eich
2013-01-17 14:45 ` Daniel Vetter
2013-01-22 13:22 ` Egbert Eich
2013-01-22 13:48 ` Daniel Vetter
2013-01-22 15:11 ` Egbert Eich
2013-02-25 17:06 ` [PATCH v.2 00/12] " Egbert Eich
2013-02-25 17:06 ` [PATCH v.2 01/12] DRM/i915: Remove valleyview_hpd_irq_setup Egbert Eich
2013-03-26 20:06 ` Jesse Barnes
2013-02-25 17:06 ` [PATCH v.2 02/12] DRM/I915: Add enum hpd_pin to intel_encoder Egbert Eich
2013-03-26 20:07 ` Jesse Barnes
2013-02-25 17:06 ` [PATCH v.2 03/12] DRM/i915: Convert HPD interrupts to make use of HPD pin assignment in encoders Egbert Eich
2013-02-28 0:12 ` Chris Wilson
2013-02-28 9:17 ` [PATCH v.2 03/12] DRM/i915: Convert HPD interrupts to make use of HPD pin assignment in encoders (v2) Egbert Eich
2013-03-26 20:08 ` [PATCH v.2 03/12] DRM/i915: Convert HPD interrupts to make use of HPD pin assignment in encoders Jesse Barnes
2013-02-25 17:06 ` [PATCH v.2 04/12] DRM/i915: Remove i965_hpd_irq_setup Egbert Eich
2013-02-25 17:06 ` [PATCH v.2 05/12] DRM/i915: Get rid if the 'hotplug_supported_mask' in struct drm_i915_private Egbert Eich
2013-03-26 21:06 ` Daniel Vetter
2013-03-27 15:08 ` Egbert Eich
2013-02-25 17:06 ` [PATCH v.2 06/12] DRM/i915: Add HPD IRQ storm detection Egbert Eich
2013-02-28 0:30 ` Chris Wilson
2013-02-28 9:19 ` [PATCH v.2 06/12] DRM/i915: Add HPD IRQ storm detection (v2) Egbert Eich
2013-03-03 18:07 ` Daniel Vetter
2013-03-05 7:38 ` [PATCH v.3 06/12] DRM/i915: Add HPD IRQ storm detection (v3) Egbert Eich
2013-03-05 7:48 ` [PATCH v.2 10/12] DRM/i915: Add Reenable Timer to turn Hotplug Detection back on (v2) Egbert Eich
2013-03-05 10:28 ` Ville Syrjälä
2013-03-05 12:26 ` [PATCH v.3 10/12] DRM/i915: Add Reenable Timer to turn Hotplug Detection back on (v3) Egbert Eich
2013-03-05 7:55 ` [PATCH v.2 11/12] DRM/i915: Add bit field to record which pins have received HPD events (v2) Egbert Eich
2013-03-05 13:00 ` [PATCH v.3 11/12] DRM/i915: Add bit field to record which pins have received HPD events (v3) Egbert Eich
2013-03-05 14:52 ` Egbert Eich
2013-02-25 17:06 ` [PATCH v.2 07/12] DRM/i915: (re)init HPD interrupt storm statistics Egbert Eich
2013-02-25 17:06 ` Egbert Eich [this message]
2013-02-25 17:06 ` [PATCH v.2 09/12] DRM/i915: Disable HPD interrupt on pin when irq storm is detected Egbert Eich
2013-03-05 12:34 ` [PATCH v.2 09/12] DRM/i915: Disable HPD interrupt on pin when irq storm is detected (v2) Egbert Eich
2013-02-25 17:06 ` [PATCH v.2 10/12] DRM/i915: Add Reenable Timer to turn Hotplug Detection back on Egbert Eich
2013-03-27 15:12 ` Daniel Vetter
2013-02-25 17:06 ` [PATCH v.2 11/12] DRM/i915: Add bit field to record which pins have received HPD events Egbert Eich
2013-02-25 17:06 ` [PATCH v.2 12/12] DRM/i915: Only reprobe display on encoder which has received an HPD event Egbert Eich
2013-03-05 14:18 ` [PATCH v.3 " Egbert Eich
2013-02-28 0:46 ` [PATCH v.2 00/12] Detect and deal with Interrupt 'Storms' from noisy Hotplug Lines Chris Wilson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1361812019-20099-9-git-send-email-eich@suse.de \
--to=eich@suse.de \
--cc=chris.wilson@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=rodrigo.vivi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.