All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tony Prisk <linux@prisktech.co.nz>
To: dedekind1@gmail.com
Cc: vt8500-wm8505-linux-kernel@googlegroups.com,
	linux-mtd@lists.infradead.org,
	David Woodhouse <dwmw2@infradead.org>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2] mtd: vt8500: Add support for Wondermedia Serial Flash Controller
Date: Wed, 16 Jan 2013 12:30:41 +1300	[thread overview]
Message-ID: <1358292641.11794.1.camel@gitbox> (raw)
In-Reply-To: <1358277072.1668.2.camel@kyv>

On Tue, 2013-01-15 at 21:11 +0200, Artem Bityutskiy wrote:
> On Wed, 2013-01-16 at 06:45 +1300, Tony Prisk wrote:
> > On Tue, 2013-01-15 at 16:55 +0200, Artem Bityutskiy wrote:
> > > On Mon, 2012-12-31 at 10:00 +1300, Tony Prisk wrote:
> > > > This patch adds support for the Wondermedia serial flash controller
> > > > found on WM8505, WM8650 and WM8850 SoCs.
> > > > 
> > > > Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
> > > > ---
> > > > v2: Whitespace tidyup
> > > 
> > > Hi, would you please take a look at these warings, identified by aiaiai:
> > > 
> > > Successfully built configuration "x86_64_defconfig,x86_64,", results:
> > > 
> > > --- before_patching.log
> > > +++ after_patching.log
> > > @@ @@
> > > +drivers/mtd/devices/wmt_sflash.c: In function ‘sf_read’:
> > > +drivers/mtd/devices/wmt_sflash.c:425:9: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘size_t’ [-Wformat]
> > > +drivers/mtd/devices/wmt_sflash.c: In function ‘sf_sector_write’:
> > > +drivers/mtd/devices/wmt_sflash.c:442:16: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
> > > +drivers/mtd/devices/wmt_sflash.c:442:24: warning: cast removes address space of expression [sparse]
> > > +drivers/mtd/devices/wmt_sflash.c:458:16: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
> > > +drivers/mtd/devices/wmt_sflash.c:458:31: warning: incorrect type in argument 1 (different address spaces) [sparse]
> > > +drivers/mtd/devices/wmt_sflash.c:458:31:    expected void volatile [noderef] <asn:2>*dst [sparse]
> > > +drivers/mtd/devices/wmt_sflash.c:458:31:    got unsigned char [usertype] *<noident> [sparse]
> > > +drivers/mtd/devices/wmt_sflash.c:465:17: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
> > > +drivers/mtd/devices/wmt_sflash.c:465:39: warning: incorrect type in argument 1 (different address spaces) [sparse]
> > > +drivers/mtd/devices/wmt_sflash.c:465:39:    expected void volatile [noderef] <asn:2>*dst [sparse]
> > > +drivers/mtd/devices/wmt_sflash.c:465:39:    got unsigned char [usertype] *<noident> [sparse]
> > > 
> > 
> > Apologies - This driver shouldn't be selectable for x86_64.
> > It is an ARM driver for an embedded device. Will fix.
> 
> Note, there are also warnings when it is compiled for other platforms,
> not only x86_64. Take a look at them. Also note, than many warnings come
> from sparse, you probably just did not run it.
> 

I posted the patch for this problem this morning. It should only be
selectable on arch-vt8500 and the new patch fixes this problem.

It incorrectly depended on MTD rather than ARCH_VT8500

Regards
Tony P

WARNING: multiple messages have this Message-ID (diff)
From: linux@prisktech.co.nz (Tony Prisk)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] mtd: vt8500: Add support for Wondermedia Serial Flash Controller
Date: Wed, 16 Jan 2013 12:30:41 +1300	[thread overview]
Message-ID: <1358292641.11794.1.camel@gitbox> (raw)
In-Reply-To: <1358277072.1668.2.camel@kyv>

On Tue, 2013-01-15 at 21:11 +0200, Artem Bityutskiy wrote:
> On Wed, 2013-01-16 at 06:45 +1300, Tony Prisk wrote:
> > On Tue, 2013-01-15 at 16:55 +0200, Artem Bityutskiy wrote:
> > > On Mon, 2012-12-31 at 10:00 +1300, Tony Prisk wrote:
> > > > This patch adds support for the Wondermedia serial flash controller
> > > > found on WM8505, WM8650 and WM8850 SoCs.
> > > > 
> > > > Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
> > > > ---
> > > > v2: Whitespace tidyup
> > > 
> > > Hi, would you please take a look at these warings, identified by aiaiai:
> > > 
> > > Successfully built configuration "x86_64_defconfig,x86_64,", results:
> > > 
> > > --- before_patching.log
> > > +++ after_patching.log
> > > @@ @@
> > > +drivers/mtd/devices/wmt_sflash.c: In function ?sf_read?:
> > > +drivers/mtd/devices/wmt_sflash.c:425:9: warning: format ?%d? expects argument of type ?int?, but argument 4 has type ?size_t? [-Wformat]
> > > +drivers/mtd/devices/wmt_sflash.c: In function ?sf_sector_write?:
> > > +drivers/mtd/devices/wmt_sflash.c:442:16: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
> > > +drivers/mtd/devices/wmt_sflash.c:442:24: warning: cast removes address space of expression [sparse]
> > > +drivers/mtd/devices/wmt_sflash.c:458:16: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
> > > +drivers/mtd/devices/wmt_sflash.c:458:31: warning: incorrect type in argument 1 (different address spaces) [sparse]
> > > +drivers/mtd/devices/wmt_sflash.c:458:31:    expected void volatile [noderef] <asn:2>*dst [sparse]
> > > +drivers/mtd/devices/wmt_sflash.c:458:31:    got unsigned char [usertype] *<noident> [sparse]
> > > +drivers/mtd/devices/wmt_sflash.c:465:17: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
> > > +drivers/mtd/devices/wmt_sflash.c:465:39: warning: incorrect type in argument 1 (different address spaces) [sparse]
> > > +drivers/mtd/devices/wmt_sflash.c:465:39:    expected void volatile [noderef] <asn:2>*dst [sparse]
> > > +drivers/mtd/devices/wmt_sflash.c:465:39:    got unsigned char [usertype] *<noident> [sparse]
> > > 
> > 
> > Apologies - This driver shouldn't be selectable for x86_64.
> > It is an ARM driver for an embedded device. Will fix.
> 
> Note, there are also warnings when it is compiled for other platforms,
> not only x86_64. Take a look at them. Also note, than many warnings come
> from sparse, you probably just did not run it.
> 

I posted the patch for this problem this morning. It should only be
selectable on arch-vt8500 and the new patch fixes this problem.

It incorrectly depended on MTD rather than ARCH_VT8500

Regards
Tony P

WARNING: multiple messages have this Message-ID (diff)
From: Tony Prisk <linux@prisktech.co.nz>
To: dedekind1@gmail.com
Cc: David Woodhouse <dwmw2@infradead.org>,
	vt8500-wm8505-linux-kernel@googlegroups.com,
	linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2] mtd: vt8500: Add support for Wondermedia Serial Flash Controller
Date: Wed, 16 Jan 2013 12:30:41 +1300	[thread overview]
Message-ID: <1358292641.11794.1.camel@gitbox> (raw)
In-Reply-To: <1358277072.1668.2.camel@kyv>

On Tue, 2013-01-15 at 21:11 +0200, Artem Bityutskiy wrote:
> On Wed, 2013-01-16 at 06:45 +1300, Tony Prisk wrote:
> > On Tue, 2013-01-15 at 16:55 +0200, Artem Bityutskiy wrote:
> > > On Mon, 2012-12-31 at 10:00 +1300, Tony Prisk wrote:
> > > > This patch adds support for the Wondermedia serial flash controller
> > > > found on WM8505, WM8650 and WM8850 SoCs.
> > > > 
> > > > Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
> > > > ---
> > > > v2: Whitespace tidyup
> > > 
> > > Hi, would you please take a look at these warings, identified by aiaiai:
> > > 
> > > Successfully built configuration "x86_64_defconfig,x86_64,", results:
> > > 
> > > --- before_patching.log
> > > +++ after_patching.log
> > > @@ @@
> > > +drivers/mtd/devices/wmt_sflash.c: In function ‘sf_read’:
> > > +drivers/mtd/devices/wmt_sflash.c:425:9: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘size_t’ [-Wformat]
> > > +drivers/mtd/devices/wmt_sflash.c: In function ‘sf_sector_write’:
> > > +drivers/mtd/devices/wmt_sflash.c:442:16: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
> > > +drivers/mtd/devices/wmt_sflash.c:442:24: warning: cast removes address space of expression [sparse]
> > > +drivers/mtd/devices/wmt_sflash.c:458:16: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
> > > +drivers/mtd/devices/wmt_sflash.c:458:31: warning: incorrect type in argument 1 (different address spaces) [sparse]
> > > +drivers/mtd/devices/wmt_sflash.c:458:31:    expected void volatile [noderef] <asn:2>*dst [sparse]
> > > +drivers/mtd/devices/wmt_sflash.c:458:31:    got unsigned char [usertype] *<noident> [sparse]
> > > +drivers/mtd/devices/wmt_sflash.c:465:17: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
> > > +drivers/mtd/devices/wmt_sflash.c:465:39: warning: incorrect type in argument 1 (different address spaces) [sparse]
> > > +drivers/mtd/devices/wmt_sflash.c:465:39:    expected void volatile [noderef] <asn:2>*dst [sparse]
> > > +drivers/mtd/devices/wmt_sflash.c:465:39:    got unsigned char [usertype] *<noident> [sparse]
> > > 
> > 
> > Apologies - This driver shouldn't be selectable for x86_64.
> > It is an ARM driver for an embedded device. Will fix.
> 
> Note, there are also warnings when it is compiled for other platforms,
> not only x86_64. Take a look at them. Also note, than many warnings come
> from sparse, you probably just did not run it.
> 

I posted the patch for this problem this morning. It should only be
selectable on arch-vt8500 and the new patch fixes this problem.

It incorrectly depended on MTD rather than ARCH_VT8500

Regards
Tony P


  reply	other threads:[~2013-01-15 23:30 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-12-30 21:00 [PATCH v2] mtd: vt8500: Add support for Wondermedia Serial Flash Controller Tony Prisk
2012-12-30 21:00 ` Tony Prisk
2012-12-30 21:00 ` Tony Prisk
2013-01-15 14:55 ` Artem Bityutskiy
2013-01-15 14:55   ` Artem Bityutskiy
2013-01-15 14:55   ` Artem Bityutskiy
2013-01-15 17:45   ` Tony Prisk
2013-01-15 17:45     ` Tony Prisk
2013-01-15 17:45     ` Tony Prisk
2013-01-15 19:11     ` Artem Bityutskiy
2013-01-15 19:11       ` Artem Bityutskiy
2013-01-15 19:11       ` Artem Bityutskiy
2013-01-15 23:30       ` Tony Prisk [this message]
2013-01-15 23:30         ` Tony Prisk
2013-01-15 23:30         ` Tony Prisk
  -- strict thread matches above, loose matches on Subject: below --
2013-01-15 17:53 Tony Prisk
2013-01-15 17:53 ` Tony Prisk
2013-01-15 17:53 ` Tony Prisk
2013-01-15 19:36 ` Artem Bityutskiy
2013-01-15 19:36   ` Artem Bityutskiy
2013-01-15 19:36   ` Artem Bityutskiy
2013-01-15 23:52   ` Tony Prisk
2013-01-15 23:52     ` Tony Prisk
2013-01-15 23:52     ` Tony Prisk
2013-01-17 11:21 ` Artem Bityutskiy
2013-01-17 11:21   ` Artem Bityutskiy
2013-01-17 11:21   ` Artem Bityutskiy
2013-01-17 12:30   ` Artem Bityutskiy
2013-01-17 12:30     ` Artem Bityutskiy
2013-01-17 12:30     ` Artem Bityutskiy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1358292641.11794.1.camel@gitbox \
    --to=linux@prisktech.co.nz \
    --cc=dedekind1@gmail.com \
    --cc=dwmw2@infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=vt8500-wm8505-linux-kernel@googlegroups.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.