From: Kishon Vijay Abraham I <kishon@ti.com>
To: kishon@ti.com, balbi@ti.com, b-cousson@ti.com, tony@atomide.com,
linux@arm.linux.org.uk, s-guiriec@ti.com, gg@slimlogic.co.uk,
linux-omap@vger.kernel.org, devicetree-discuss@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 1/6] ARM: dts: omap5: Add omap control usb data
Date: Fri, 25 Jan 2013 16:41:47 +0530 [thread overview]
Message-ID: <1359112312-6918-2-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1359112312-6918-1-git-send-email-kishon@ti.com>
Add omap control usb data in omap5 device tree file. This will have the
register address of registers to power on the USB2 PHY and USB3 PHY. The
information for the node added here is available in
Documentation/devicetree/bindings/usb/omap-usb.txt
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
arch/arm/boot/dts/omap5.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 7a78d1b..edc7464 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -504,5 +504,13 @@
hw-caps-ll-interface;
hw-caps-temp-alert;
};
+
+ omap_control_usb: omap-control-usb@4a002300 {
+ compatible = "ti,omap-control-usb";
+ reg = <0x4a002300 0x4>,
+ <0x4a002370 0x4>;
+ reg-names = "control_dev_conf", "phy_power_usb";
+ ti,type = <2>;
+ };
};
};
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: kishon@ti.com (Kishon Vijay Abraham I)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/6] ARM: dts: omap5: Add omap control usb data
Date: Fri, 25 Jan 2013 16:41:47 +0530 [thread overview]
Message-ID: <1359112312-6918-2-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1359112312-6918-1-git-send-email-kishon@ti.com>
Add omap control usb data in omap5 device tree file. This will have the
register address of registers to power on the USB2 PHY and USB3 PHY. The
information for the node added here is available in
Documentation/devicetree/bindings/usb/omap-usb.txt
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
arch/arm/boot/dts/omap5.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 7a78d1b..edc7464 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -504,5 +504,13 @@
hw-caps-ll-interface;
hw-caps-temp-alert;
};
+
+ omap_control_usb: omap-control-usb at 4a002300 {
+ compatible = "ti,omap-control-usb";
+ reg = <0x4a002300 0x4>,
+ <0x4a002370 0x4>;
+ reg-names = "control_dev_conf", "phy_power_usb";
+ ti,type = <2>;
+ };
};
};
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: Kishon Vijay Abraham I <kishon@ti.com>
To: <kishon@ti.com>, <balbi@ti.com>, <b-cousson@ti.com>,
<tony@atomide.com>, <linux@arm.linux.org.uk>, <s-guiriec@ti.com>,
<gg@slimlogic.co.uk>, <linux-omap@vger.kernel.org>,
<devicetree-discuss@lists.ozlabs.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v2 1/6] ARM: dts: omap5: Add omap control usb data
Date: Fri, 25 Jan 2013 16:41:47 +0530 [thread overview]
Message-ID: <1359112312-6918-2-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1359112312-6918-1-git-send-email-kishon@ti.com>
Add omap control usb data in omap5 device tree file. This will have the
register address of registers to power on the USB2 PHY and USB3 PHY. The
information for the node added here is available in
Documentation/devicetree/bindings/usb/omap-usb.txt
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
arch/arm/boot/dts/omap5.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 7a78d1b..edc7464 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -504,5 +504,13 @@
hw-caps-ll-interface;
hw-caps-temp-alert;
};
+
+ omap_control_usb: omap-control-usb@4a002300 {
+ compatible = "ti,omap-control-usb";
+ reg = <0x4a002300 0x4>,
+ <0x4a002370 0x4>;
+ reg-names = "control_dev_conf", "phy_power_usb";
+ ti,type = <2>;
+ };
};
};
--
1.7.9.5
next prev parent reply other threads:[~2013-01-25 11:12 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-25 11:11 [PATCH v2 0/6] ARM: dts: omap: add dt data for dwc3 Kishon Vijay Abraham I
2013-01-25 11:11 ` Kishon Vijay Abraham I
2013-01-25 11:11 ` Kishon Vijay Abraham I
2013-01-25 11:11 ` Kishon Vijay Abraham I [this message]
2013-01-25 11:11 ` [PATCH v2 1/6] ARM: dts: omap5: Add omap control usb data Kishon Vijay Abraham I
2013-01-25 11:11 ` Kishon Vijay Abraham I
[not found] ` <1359112312-6918-1-git-send-email-kishon-l0cyMroinI0@public.gmane.org>
2013-01-25 11:11 ` [PATCH v2 2/6] ARM: dts: omap5: Add ocp2scp data Kishon Vijay Abraham I
2013-01-25 11:11 ` Kishon Vijay Abraham I
2013-01-25 11:11 ` Kishon Vijay Abraham I
2013-01-25 11:11 ` [PATCH v2 3/6] ARM: dts: omap5: Add omap-usb3 and omap-usb2 dt data Kishon Vijay Abraham I
2013-01-25 11:11 ` Kishon Vijay Abraham I
2013-01-25 11:11 ` Kishon Vijay Abraham I
2013-01-25 12:18 ` [PATCH v2 0/6] ARM: dts: omap: add dt data for dwc3 Felipe Balbi
2013-01-25 12:18 ` Felipe Balbi
2013-01-25 12:18 ` Felipe Balbi
2013-01-25 11:11 ` [PATCH v2 4/6] ARM: dts: omap5: add dwc3 omap dt data Kishon Vijay Abraham I
2013-01-25 11:11 ` Kishon Vijay Abraham I
2013-01-25 11:11 ` Kishon Vijay Abraham I
2013-01-26 19:47 ` Sergei Shtylyov
2013-01-26 19:47 ` Sergei Shtylyov
2013-02-05 8:29 ` kishon
2013-02-05 8:29 ` kishon
2013-02-05 8:29 ` kishon
[not found] ` <5110C2E6.30504-l0cyMroinI0@public.gmane.org>
2013-02-05 8:38 ` Felipe Balbi
2013-02-05 8:38 ` Felipe Balbi
2013-02-05 8:38 ` Felipe Balbi
[not found] ` <20130205083828.GE32118-S8G//mZuvNWo5Im9Ml3/Zg@public.gmane.org>
2013-02-05 8:46 ` kishon
2013-02-05 8:46 ` kishon
2013-02-05 8:46 ` kishon
[not found] ` <5110C6EC.6050606-l0cyMroinI0@public.gmane.org>
2013-02-05 9:07 ` Santosh Shilimkar
2013-02-05 9:07 ` Santosh Shilimkar
2013-02-05 9:07 ` Santosh Shilimkar
[not found] ` <5110CBB9.5080307-l0cyMroinI0@public.gmane.org>
2013-02-05 9:46 ` Felipe Balbi
2013-02-05 9:46 ` Felipe Balbi
2013-02-05 9:46 ` Felipe Balbi
2013-01-25 11:11 ` [PATCH v2 5/6] ARM: dts: omap5: add dwc3 core " Kishon Vijay Abraham I
2013-01-25 11:11 ` Kishon Vijay Abraham I
2013-01-25 11:11 ` Kishon Vijay Abraham I
2013-01-26 19:49 ` Sergei Shtylyov
2013-01-26 19:49 ` Sergei Shtylyov
2013-01-25 11:11 ` [PATCH v2 6/6] ARM: dts: palmas: update dt data for palmas-usb Kishon Vijay Abraham I
2013-01-25 11:11 ` Kishon Vijay Abraham I
2013-01-25 11:11 ` Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1359112312-6918-2-git-send-email-kishon@ti.com \
--to=kishon@ti.com \
--cc=b-cousson@ti.com \
--cc=balbi@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=gg@slimlogic.co.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=s-guiriec@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.