From: Paulo Zanoni <przanoni@gmail.com>
To: intel-gfx@lists.freedesktop.org
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Subject: [PATCH 2/7] drm/i915: use FPGA_DBG for the "unclaimed register" checks
Date: Fri, 25 Jan 2013 18:57:37 -0200 [thread overview]
Message-ID: <1359147462-3902-3-git-send-email-przanoni@gmail.com> (raw)
In-Reply-To: <1359147462-3902-1-git-send-email-przanoni@gmail.com>
From: Paulo Zanoni <paulo.r.zanoni@intel.com>
We plan to treat GEN7_ERR_INT as an interrupt, so use this register
for the checks inside I915_WRITE. This way we can have the best of
both worlds: the error message with a register address and the
interrupt.
V2: Split in 2 patches: one for the macro, one for changing the
register, as requested by Ben.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
---
drivers/gpu/drm/i915/i915_drv.c | 8 ++++----
drivers/gpu/drm/i915/i915_reg.h | 3 +++
2 files changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index ae0a55a..f47de4d 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -1226,16 +1226,16 @@ ilk_dummy_write(struct drm_i915_private *dev_priv)
#define UNCLAIMED_REG_CLEAR(dev_priv, reg) \
if (IS_HASWELL(dev_priv->dev) && \
- (I915_READ_NOTRACE(GEN7_ERR_INT) & ERR_INT_MMIO_UNCLAIMED)) { \
+ (I915_READ_NOTRACE(FPGA_DBG) & FPGA_DBG_RM_NOCLAIM)) { \
DRM_ERROR("Unknown unclaimed register before writing to %x\n", reg); \
- I915_WRITE_NOTRACE(GEN7_ERR_INT, ERR_INT_MMIO_UNCLAIMED); \
+ I915_WRITE_NOTRACE(FPGA_DBG, FPGA_DBG_RM_NOCLAIM); \
}
#define UNCLAIMED_REG_CHECK(dev_priv, reg) \
if (IS_HASWELL(dev_priv->dev) && \
- (I915_READ_NOTRACE(GEN7_ERR_INT) & ERR_INT_MMIO_UNCLAIMED)) { \
+ (I915_READ_NOTRACE(FPGA_DBG) & FPGA_DBG_RM_NOCLAIM)) { \
DRM_ERROR("Unclaimed write to %x\n", reg); \
- writel(ERR_INT_MMIO_UNCLAIMED, dev_priv->regs + GEN7_ERR_INT); \
+ I915_WRITE_NOTRACE(FPGA_DBG, FPGA_DBG_RM_NOCLAIM); \
}
#define __i915_read(x, y) \
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 15c15a5..ee30fb9 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -515,6 +515,9 @@
#define GEN7_ERR_INT 0x44040
#define ERR_INT_MMIO_UNCLAIMED (1<<13)
+#define FPGA_DBG 0x42300
+#define FPGA_DBG_RM_NOCLAIM (1<<31)
+
/* GM45+ chicken bits -- debug workaround bits that may be required
* for various sorts of correct behavior. The top 16 bits of each are
* the enables for writing to the corresponding low bit.
--
1.7.10.4
next prev parent reply other threads:[~2013-01-25 20:58 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-25 20:57 [PATCH 0/7] Unclaimed register reporting V2 Paulo Zanoni
2013-01-25 20:57 ` [PATCH 1/7] drm/i915: create macros for the "unclaimed register" checks Paulo Zanoni
2013-01-26 1:02 ` Ben Widawsky
2013-01-28 20:17 ` Ben Widawsky
2013-01-25 20:57 ` Paulo Zanoni [this message]
2013-01-26 1:03 ` [PATCH 2/7] drm/i915: use FPGA_DBG " Ben Widawsky
2013-01-25 20:57 ` [PATCH 3/7] drm/i915: clear the FPGA_DBG_RM_NOCLAIM bit at driver init Paulo Zanoni
2013-01-26 1:05 ` Ben Widawsky
2013-01-29 19:02 ` [PATCH 3/3] " Paulo Zanoni
2013-01-25 20:57 ` [PATCH 4/7] drm/i915: check for unclaimed registers on I915_READ too Paulo Zanoni
2013-01-25 20:57 ` [PATCH 5/7] drm/i915: WARN on unclaimed registers Paulo Zanoni
2013-01-26 1:11 ` Ben Widawsky
2013-01-25 20:57 ` [PATCH 6/7] drm/i915: only check for unclaimed registers if drm_debug Paulo Zanoni
2013-01-25 20:57 ` [PATCH 7/7] drm/i915: print Gen 7 error interrupts Paulo Zanoni
2013-01-26 1:24 ` Ben Widawsky
2013-02-08 18:22 ` Paulo Zanoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1359147462-3902-3-git-send-email-przanoni@gmail.com \
--to=przanoni@gmail.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=paulo.r.zanoni@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.