From: Daniel Mack <zonque@gmail.com>
To: alsa-devel@alsa-project.org
Cc: broonie@opensource.wolfsonmicro.com,
Michal Bachraty <michal.bachraty@streamunlimited.com>,
Vaibhav Bedia <vaibhav.bedia@ti.com>,
Daniel Mack <zonque@gmail.com>
Subject: [PATCH] ALSA: ASoC: davinci-mcasp: clean ip davinci_hw_common_param()
Date: Fri, 8 Mar 2013 14:19:38 +0100 [thread overview]
Message-ID: <1362748778-11076-1-git-send-email-zonque@gmail.com> (raw)
As pointed of by Vaibhav, commit 2952b27e2 ("ASoC: davinci-mcasp:
Add support for multichannel playback") duplicated the logic of
counting the active serializers. That can be avoided by shifting
the code around a bit.
Also, drop two unused defines introduced by the same commit.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Cc: Michal Bachraty <michal.bachraty@streamunlimited.com>
Cc: Vaibhav Bedia <vaibhav.bedia@ti.com>
---
sound/soc/davinci/davinci-mcasp.c | 34 +++++++++++-----------------------
1 file changed, 11 insertions(+), 23 deletions(-)
diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c
index b386cad..8a9c0ee 100644
--- a/sound/soc/davinci/davinci-mcasp.c
+++ b/sound/soc/davinci/davinci-mcasp.c
@@ -237,8 +237,6 @@
#define RXSTATE BIT(5)
#define SRMOD_MASK 3
#define SRMOD_INACTIVE 0
-#define SRMOD_TX 1
-#define SRMOD_RX 2
/*
* DAVINCI_MCASP_LBCTL_REG - Loop Back Control Register Bits
@@ -691,27 +689,6 @@ static int davinci_hw_common_param(struct davinci_audio_dev *dev, int stream,
}
for (i = 0; i < dev->num_serializer; i++) {
- if (dev->serial_dir[i] == TX_MODE)
- tx_ser++;
- if (dev->serial_dir[i] == RX_MODE)
- rx_ser++;
- }
-
- if (stream == SNDRV_PCM_STREAM_PLAYBACK)
- ser = tx_ser;
- else
- ser = rx_ser;
-
- if (ser < max_active_serializers) {
- dev_warn(dev->dev, "stream has more channels (%d) than are "
- "enabled in mcasp (%d)\n", channels, ser * slots);
- return -EINVAL;
- }
-
- tx_ser = 0;
- rx_ser = 0;
-
- for (i = 0; i < dev->num_serializer; i++) {
mcasp_set_bits(dev->base + DAVINCI_MCASP_XRSRCTL_REG(i),
dev->serial_dir[i]);
if (dev->serial_dir[i] == TX_MODE &&
@@ -730,6 +707,17 @@ static int davinci_hw_common_param(struct davinci_audio_dev *dev, int stream,
}
}
+ if (stream == SNDRV_PCM_STREAM_PLAYBACK)
+ ser = tx_ser;
+ else
+ ser = rx_ser;
+
+ if (ser < max_active_serializers) {
+ dev_warn(dev->dev, "stream has more channels (%d) than are "
+ "enabled in mcasp (%d)\n", channels, ser * slots);
+ return -EINVAL;
+ }
+
if (dev->txnumevt && stream == SNDRV_PCM_STREAM_PLAYBACK) {
if (dev->txnumevt * tx_ser > 64)
dev->txnumevt = 1;
--
1.8.1.4
next reply other threads:[~2013-03-08 13:19 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-08 13:19 Daniel Mack [this message]
2013-03-08 15:17 ` [PATCH] ALSA: ASoC: davinci-mcasp: clean ip davinci_hw_common_param() Michal Bachraty
2013-03-11 7:09 ` Bedia, Vaibhav
2013-03-11 8:49 ` Daniel Mack
2013-03-12 19:04 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1362748778-11076-1-git-send-email-zonque@gmail.com \
--to=zonque@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=michal.bachraty@streamunlimited.com \
--cc=vaibhav.bedia@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.