From: Jon Hunter <jon-hunter@ti.com>
To: Tony Lindgren <tony@atomide.com>, Benoit Cousson <b-cousson@ti.com>
Cc: device-tree <devicetree-discuss@lists.ozlabs.org>,
linux-omap <linux-omap@vger.kernel.org>,
linux-arm <linux-arm-kernel@lists.infradead.org>,
Jon Hunter <jon-hunter@ti.com>
Subject: [PATCH 8/9] ARM: dts: OMAP3+: Correct gpio #interrupts-cells property
Date: Fri, 8 Mar 2013 11:27:32 -0600 [thread overview]
Message-ID: <1362763654-9660-9-git-send-email-jon-hunter@ti.com> (raw)
In-Reply-To: <1362763654-9660-1-git-send-email-jon-hunter@ti.com>
The OMAP gpio binding documention [1] states that the #interrupts-cells
property for gpio controllers should be 2. Currently, for OMAP3+ devices
the #interrupt-cells is set to 1. By setting this property to 2, it
allows clients to pass a 2nd parameter indicating the sensitivity (level
or edge) and polarity (high or low) of the interrupt. The OMAP gpio
controllers support these options and so update the #interrupt-cells
property for OMAP3+ devices to 2.
[1] Documentation/devicetree/bindings/gpio/gpio-omap.txt
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
---
arch/arm/boot/dts/omap3.dtsi | 12 ++++++------
arch/arm/boot/dts/omap4.dtsi | 12 ++++++------
arch/arm/boot/dts/omap5.dtsi | 16 ++++++++--------
3 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 5b36de5..c9bedf7 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -117,7 +117,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio2: gpio@49050000 {
@@ -126,7 +126,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio3: gpio@49052000 {
@@ -135,7 +135,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio4: gpio@49054000 {
@@ -144,7 +144,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio5: gpio@49056000 {
@@ -153,7 +153,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio6: gpio@49058000 {
@@ -162,7 +162,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
uart1: serial@4806a000 {
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 726ef11..544be06 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -138,7 +138,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio2: gpio@48055000 {
@@ -149,7 +149,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio3: gpio@48057000 {
@@ -160,7 +160,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio4: gpio@48059000 {
@@ -171,7 +171,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio5: gpio@4805b000 {
@@ -182,7 +182,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio6: gpio@4805d000 {
@@ -193,7 +193,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpmc: gpmc@50000000 {
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 34f41ad..93feb50 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -128,7 +128,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio2: gpio@48055000 {
@@ -139,7 +139,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio3: gpio@48057000 {
@@ -150,7 +150,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio4: gpio@48059000 {
@@ -161,7 +161,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio5: gpio@4805b000 {
@@ -172,7 +172,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio6: gpio@4805d000 {
@@ -183,7 +183,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio7: gpio@48051000 {
@@ -194,7 +194,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio8: gpio@48053000 {
@@ -205,7 +205,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpmc: gpmc@50000000 {
--
1.7.10.4
WARNING: multiple messages have this Message-ID (diff)
From: jon-hunter@ti.com (Jon Hunter)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 8/9] ARM: dts: OMAP3+: Correct gpio #interrupts-cells property
Date: Fri, 8 Mar 2013 11:27:32 -0600 [thread overview]
Message-ID: <1362763654-9660-9-git-send-email-jon-hunter@ti.com> (raw)
In-Reply-To: <1362763654-9660-1-git-send-email-jon-hunter@ti.com>
The OMAP gpio binding documention [1] states that the #interrupts-cells
property for gpio controllers should be 2. Currently, for OMAP3+ devices
the #interrupt-cells is set to 1. By setting this property to 2, it
allows clients to pass a 2nd parameter indicating the sensitivity (level
or edge) and polarity (high or low) of the interrupt. The OMAP gpio
controllers support these options and so update the #interrupt-cells
property for OMAP3+ devices to 2.
[1] Documentation/devicetree/bindings/gpio/gpio-omap.txt
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
---
arch/arm/boot/dts/omap3.dtsi | 12 ++++++------
arch/arm/boot/dts/omap4.dtsi | 12 ++++++------
arch/arm/boot/dts/omap5.dtsi | 16 ++++++++--------
3 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 5b36de5..c9bedf7 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -117,7 +117,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio2: gpio at 49050000 {
@@ -126,7 +126,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio3: gpio at 49052000 {
@@ -135,7 +135,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio4: gpio at 49054000 {
@@ -144,7 +144,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio5: gpio at 49056000 {
@@ -153,7 +153,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio6: gpio at 49058000 {
@@ -162,7 +162,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
uart1: serial at 4806a000 {
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 726ef11..544be06 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -138,7 +138,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio2: gpio at 48055000 {
@@ -149,7 +149,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio3: gpio at 48057000 {
@@ -160,7 +160,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio4: gpio at 48059000 {
@@ -171,7 +171,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio5: gpio at 4805b000 {
@@ -182,7 +182,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio6: gpio at 4805d000 {
@@ -193,7 +193,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpmc: gpmc at 50000000 {
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 34f41ad..93feb50 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -128,7 +128,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio2: gpio at 48055000 {
@@ -139,7 +139,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio3: gpio at 48057000 {
@@ -150,7 +150,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio4: gpio at 48059000 {
@@ -161,7 +161,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio5: gpio at 4805b000 {
@@ -172,7 +172,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio6: gpio at 4805d000 {
@@ -183,7 +183,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio7: gpio at 48051000 {
@@ -194,7 +194,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio8: gpio at 48053000 {
@@ -205,7 +205,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpmc: gpmc at 50000000 {
--
1.7.10.4
next prev parent reply other threads:[~2013-03-08 17:28 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-08 17:27 [PATCH 0/9] ARM: dts: Various OMAP2+ device-tree updates Jon Hunter
2013-03-08 17:27 ` Jon Hunter
2013-03-08 17:27 ` [PATCH 1/9] ARM: OMAP2+: Prepare for device-tree PMU support Jon Hunter
2013-03-08 17:27 ` Jon Hunter
2013-03-08 17:27 ` [PATCH 2/9] ARM: dts: OMAP2+: Add PMU nodes Jon Hunter
2013-03-08 17:27 ` Jon Hunter
2013-03-08 17:27 ` [PATCH 3/9] ARM: dts: OMAP2+: Add SDMA controller bindings and nodes Jon Hunter
2013-03-08 17:27 ` Jon Hunter
2013-03-08 17:27 ` [PATCH 4/9] ARM: dts: OMAP3: Add support for OMAP3430 SDP board Jon Hunter
2013-03-08 17:27 ` Jon Hunter
2013-03-09 2:25 ` Anil Kumar
2013-03-09 2:25 ` Anil Kumar
2013-03-11 17:53 ` Jon Hunter
2013-03-11 17:53 ` Jon Hunter
2013-03-12 2:42 ` Kumar, Anil
2013-03-12 2:42 ` Kumar, Anil
2013-03-12 8:50 ` Javier Martinez Canillas
2013-03-12 8:50 ` Javier Martinez Canillas
2013-03-13 2:50 ` Kumar, Anil
2013-03-13 2:50 ` Kumar, Anil
2013-03-12 21:27 ` Jon Hunter
2013-03-12 21:27 ` Jon Hunter
2013-03-13 2:59 ` Kumar, Anil
2013-03-13 2:59 ` Kumar, Anil
2013-03-11 2:45 ` Anil Kumar
2013-03-11 2:45 ` Anil Kumar
2013-03-11 17:54 ` Jon Hunter
2013-03-11 17:54 ` Jon Hunter
2013-03-08 17:27 ` [PATCH 5/9] ARM: dts: Add GPMC node for OMAP2, OMAP4 and OMAP5 Jon Hunter
2013-03-08 17:27 ` Jon Hunter
2013-03-08 20:25 ` Javier Martinez Canillas
2013-03-08 20:25 ` Javier Martinez Canillas
2013-03-08 21:41 ` Jon Hunter
2013-03-08 21:41 ` Jon Hunter
2013-03-09 1:25 ` Javier Martinez Canillas
2013-03-09 1:25 ` Javier Martinez Canillas
2013-03-09 12:42 ` Ezequiel Garcia
2013-03-09 12:42 ` Ezequiel Garcia
2013-03-11 17:56 ` Jon Hunter
2013-03-11 17:56 ` Jon Hunter
2013-03-14 15:45 ` Benoit Cousson
2013-03-14 15:45 ` Benoit Cousson
2013-03-14 15:50 ` Jon Hunter
2013-03-14 15:50 ` Jon Hunter
2013-03-14 15:57 ` Ezequiel Garcia
2013-03-14 15:57 ` Ezequiel Garcia
2013-03-14 15:58 ` Benoit Cousson
2013-03-14 15:58 ` Benoit Cousson
2013-03-14 16:00 ` Jon Hunter
2013-03-14 16:00 ` Jon Hunter
2013-03-14 16:03 ` Benoit Cousson
2013-03-14 16:03 ` Benoit Cousson
2013-03-08 17:27 ` [PATCH 6/9] ARM: dts: Add OMAP3430 SDP flash memory bindings Jon Hunter
2013-03-08 17:27 ` Jon Hunter
2013-03-08 17:27 ` [PATCH 7/9] ARM: dts: Add OMAP2 gpio bindings Jon Hunter
2013-03-08 17:27 ` Jon Hunter
2013-03-08 17:27 ` Jon Hunter [this message]
2013-03-08 17:27 ` [PATCH 8/9] ARM: dts: OMAP3+: Correct gpio #interrupts-cells property Jon Hunter
2013-03-08 17:27 ` [PATCH 9/9] ARM: dts: OMAP3: Add reg and interrupt properties for gpio Jon Hunter
2013-03-08 17:27 ` Jon Hunter
2013-03-14 14:57 ` [PATCH 0/9] ARM: dts: Various OMAP2+ device-tree updates Benoit Cousson
2013-03-14 14:57 ` Benoit Cousson
2013-03-14 15:45 ` Florian Vaussard
2013-03-14 15:45 ` Florian Vaussard
2013-03-14 15:59 ` Jon Hunter
2013-03-14 15:59 ` Jon Hunter
2013-03-14 16:06 ` Benoit Cousson
2013-03-14 16:06 ` Benoit Cousson
2013-03-14 16:02 ` Javier Martinez Canillas
2013-03-14 16:02 ` Javier Martinez Canillas
2013-03-14 16:04 ` Jon Hunter
2013-03-14 16:04 ` Jon Hunter
2013-03-14 16:08 ` Benoit Cousson
2013-03-14 16:08 ` Benoit Cousson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1362763654-9660-9-git-send-email-jon-hunter@ti.com \
--to=jon-hunter@ti.com \
--cc=b-cousson@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.