From: Nishanth Menon <nm@ti.com>
To: linux-omap@vger.kernel.org
Cc: "Rob Herring" <robherring2@gmail.com>,
cpufreq@vger.kernel.org, linux-pm@vger.kernel.org,
"Nishanth Menon" <nm@ti.com>, "Kevin Hilman" <khilman@linaro.org>,
"Rajendra Nayak" <rnayak@ti.com>,
"Paul Walmsley" <paul@pwsan.com>,
"Benoît Cousson" <b-cousson@ti.com>,
"Jon Hunter" <jon-hunter@ti.com>, Keerthy <j-keerthy@ti.com>,
"Santosh Shilimkar" <santosh.shilimkar@ti.com>,
"Shawn Guo" <shawn.guo@linaro.org>
Subject: [PATCH V3 2/2] cpufreq: OMAP: instantiate omap-cpufreq as a platform_driver
Date: Thu, 28 Mar 2013 16:52:56 -0500 [thread overview]
Message-ID: <1364507576-19345-3-git-send-email-nm@ti.com> (raw)
In-Reply-To: <1364507576-19345-1-git-send-email-nm@ti.com>
As multi-platform build is being adopted by more and more ARM platforms,
initcall function should be used very carefully. For example, when
CONFIG_ARM_OMAP2PLUS_CPUFREQ is built in the kernel, omap_cpufreq_init()
will be called on all the platforms to initialize omap-cpufreq driver.
Further, on OMAP, we now use Soc generic cpufreq-cpu0 driver using device
tree entries. To allow cpufreq-cpu0 and omap-cpufreq drivers to co-exist
for OMAP in a single image, we need to ensure the following:
1. With device tree boot, we use cpufreq-cpu0
2. With non device tree boot, we use omap-cpufreq
In the case of (1), we will have cpu OPPs and regulator registered
as part of the device tree nodes, to ensure that omap-cpufreq
and cpufreq-cpu0 don't conflict in managing the frequency of the
same CPU, we should not permit omap-cpufreq to be probed.
In the case of (2), we will not have the cpufreq-cpu0 device, hence
only omap-cpufreq will be active.
To eliminate this undesired these effects, we change omap-cpufreq
driver to have it instantiated as a platform_driver and register
"omap-cpufreq" device only when booted without device tree nodes on
OMAP platforms.
This allows the following:
a) Will only run on platforms that create the platform_device
"omap-cpufreq".
b) Since the platform_device is registered only when device tree nodes
are *not* populated, omap-cpufreq driver does not conflict with
the usage of cpufreq-cpu0 driver which is used on OMAP platforms when
device tree nodes are present.
Inspired by commit 5553f9e26f6f49a93ba732fd222eac6973a4cf35
(cpufreq: instantiate cpufreq-cpu0 as a platform_driver)
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: "Benoît Cousson" <b-cousson@ti.com>
Cc: Jon Hunter <jon-hunter@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
[robherring2@gmail.com: reported conflict of omap-cpufreq vs other
driver in an non-device tree supported boot]
Reported-by: Rob Herring <robherring2@gmail.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
Changes in V3:
- converted to platform_driver to
address https://patchwork.kernel.org/patch/2303491/ as well
- modified CC list.
V2: https://patchwork.kernel.org/patch/2303491/
V1: https://patchwork.kernel.org/patch/2273681/
arch/arm/mach-omap2/pm.c | 9 +++++++++
drivers/cpufreq/omap-cpufreq.c | 19 ++++++++++++++-----
2 files changed, 23 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 673a4c1..8d15f9a 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -265,6 +265,12 @@ static void __init omap4_init_voltages(void)
omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", "iva");
}
+static inline void omap_init_cpufreq(void)
+{
+ struct platform_device_info devinfo = { .name = "omap-cpufreq", };
+ platform_device_register_full(&devinfo);
+}
+
static int __init omap2_common_pm_init(void)
{
if (!of_have_populated_dt())
@@ -294,6 +300,9 @@ int __init omap2_common_pm_late_init(void)
/* Smartreflex device init */
omap_devinit_smartreflex();
+
+ /* cpufreq dummy device instantiation */
+ omap_init_cpufreq();
}
#ifdef CONFIG_SUSPEND
diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c
index 9128c07..d4f84b8 100644
--- a/drivers/cpufreq/omap-cpufreq.c
+++ b/drivers/cpufreq/omap-cpufreq.c
@@ -25,6 +25,7 @@
#include <linux/opp.h>
#include <linux/cpu.h>
#include <linux/module.h>
+#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <asm/smp_plat.h>
@@ -252,7 +253,7 @@ static struct cpufreq_driver omap_driver = {
.attr = omap_cpufreq_attr,
};
-static int __init omap_cpufreq_init(void)
+static int omap_cpufreq_probe(struct platform_device *pdev)
{
mpu_dev = get_cpu_device(0);
if (!mpu_dev) {
@@ -280,12 +281,20 @@ static int __init omap_cpufreq_init(void)
return cpufreq_register_driver(&omap_driver);
}
-static void __exit omap_cpufreq_exit(void)
+static int omap_cpufreq_remove(struct platform_device *pdev)
{
- cpufreq_unregister_driver(&omap_driver);
+ return cpufreq_unregister_driver(&omap_driver);
}
+static struct platform_driver omap_cpufreq_platdrv = {
+ .driver = {
+ .name = "omap-cpufreq",
+ .owner = THIS_MODULE,
+ },
+ .probe = omap_cpufreq_probe,
+ .remove = omap_cpufreq_remove,
+};
+module_platform_driver(omap_cpufreq_platdrv);
+
MODULE_DESCRIPTION("cpufreq driver for OMAP SoCs");
MODULE_LICENSE("GPL");
-module_init(omap_cpufreq_init);
-module_exit(omap_cpufreq_exit);
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Nishanth Menon <nm@ti.com>
To: linux-omap@vger.kernel.org
Cc: "Rob Herring" <robherring2@gmail.com>,
cpufreq@vger.kernel.org, linux-pm@vger.kernel.org,
"Nishanth Menon" <nm@ti.com>, "Kevin Hilman" <khilman@linaro.org>,
"Rajendra Nayak" <rnayak@ti.com>,
"Paul Walmsley" <paul@pwsan.com>,
"Benoît Cousson" <b-cousson@ti.com>,
"Jon Hunter" <jon-hunter@ti.com>, Keerthy <j-keerthy@ti.com>,
"Santosh Shilimkar" <santosh.shilimkar@ti.com>,
"Shawn Guo" <shawn.guo@linaro.org>
Subject: [PATCH V3 2/2] cpufreq: OMAP: instantiate omap-cpufreq as a platform_driver
Date: Thu, 28 Mar 2013 16:52:56 -0500 [thread overview]
Message-ID: <1364507576-19345-3-git-send-email-nm@ti.com> (raw)
In-Reply-To: <1364507576-19345-1-git-send-email-nm@ti.com>
As multi-platform build is being adopted by more and more ARM platforms,
initcall function should be used very carefully. For example, when
CONFIG_ARM_OMAP2PLUS_CPUFREQ is built in the kernel, omap_cpufreq_init()
will be called on all the platforms to initialize omap-cpufreq driver.
Further, on OMAP, we now use Soc generic cpufreq-cpu0 driver using device
tree entries. To allow cpufreq-cpu0 and omap-cpufreq drivers to co-exist
for OMAP in a single image, we need to ensure the following:
1. With device tree boot, we use cpufreq-cpu0
2. With non device tree boot, we use omap-cpufreq
In the case of (1), we will have cpu OPPs and regulator registered
as part of the device tree nodes, to ensure that omap-cpufreq
and cpufreq-cpu0 don't conflict in managing the frequency of the
same CPU, we should not permit omap-cpufreq to be probed.
In the case of (2), we will not have the cpufreq-cpu0 device, hence
only omap-cpufreq will be active.
To eliminate this undesired these effects, we change omap-cpufreq
driver to have it instantiated as a platform_driver and register
"omap-cpufreq" device only when booted without device tree nodes on
OMAP platforms.
This allows the following:
a) Will only run on platforms that create the platform_device
"omap-cpufreq".
b) Since the platform_device is registered only when device tree nodes
are *not* populated, omap-cpufreq driver does not conflict with
the usage of cpufreq-cpu0 driver which is used on OMAP platforms when
device tree nodes are present.
Inspired by commit 5553f9e26f6f49a93ba732fd222eac6973a4cf35
(cpufreq: instantiate cpufreq-cpu0 as a platform_driver)
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: "Benoît Cousson" <b-cousson@ti.com>
Cc: Jon Hunter <jon-hunter@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
[robherring2@gmail.com: reported conflict of omap-cpufreq vs other
driver in an non-device tree supported boot]
Reported-by: Rob Herring <robherring2@gmail.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
Changes in V3:
- converted to platform_driver to
address https://patchwork.kernel.org/patch/2303491/ as well
- modified CC list.
V2: https://patchwork.kernel.org/patch/2303491/
V1: https://patchwork.kernel.org/patch/2273681/
arch/arm/mach-omap2/pm.c | 9 +++++++++
drivers/cpufreq/omap-cpufreq.c | 19 ++++++++++++++-----
2 files changed, 23 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 673a4c1..8d15f9a 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -265,6 +265,12 @@ static void __init omap4_init_voltages(void)
omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", "iva");
}
+static inline void omap_init_cpufreq(void)
+{
+ struct platform_device_info devinfo = { .name = "omap-cpufreq", };
+ platform_device_register_full(&devinfo);
+}
+
static int __init omap2_common_pm_init(void)
{
if (!of_have_populated_dt())
@@ -294,6 +300,9 @@ int __init omap2_common_pm_late_init(void)
/* Smartreflex device init */
omap_devinit_smartreflex();
+
+ /* cpufreq dummy device instantiation */
+ omap_init_cpufreq();
}
#ifdef CONFIG_SUSPEND
diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c
index 9128c07..d4f84b8 100644
--- a/drivers/cpufreq/omap-cpufreq.c
+++ b/drivers/cpufreq/omap-cpufreq.c
@@ -25,6 +25,7 @@
#include <linux/opp.h>
#include <linux/cpu.h>
#include <linux/module.h>
+#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <asm/smp_plat.h>
@@ -252,7 +253,7 @@ static struct cpufreq_driver omap_driver = {
.attr = omap_cpufreq_attr,
};
-static int __init omap_cpufreq_init(void)
+static int omap_cpufreq_probe(struct platform_device *pdev)
{
mpu_dev = get_cpu_device(0);
if (!mpu_dev) {
@@ -280,12 +281,20 @@ static int __init omap_cpufreq_init(void)
return cpufreq_register_driver(&omap_driver);
}
-static void __exit omap_cpufreq_exit(void)
+static int omap_cpufreq_remove(struct platform_device *pdev)
{
- cpufreq_unregister_driver(&omap_driver);
+ return cpufreq_unregister_driver(&omap_driver);
}
+static struct platform_driver omap_cpufreq_platdrv = {
+ .driver = {
+ .name = "omap-cpufreq",
+ .owner = THIS_MODULE,
+ },
+ .probe = omap_cpufreq_probe,
+ .remove = omap_cpufreq_remove,
+};
+module_platform_driver(omap_cpufreq_platdrv);
+
MODULE_DESCRIPTION("cpufreq driver for OMAP SoCs");
MODULE_LICENSE("GPL");
-module_init(omap_cpufreq_init);
-module_exit(omap_cpufreq_exit);
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2013-03-28 21:52 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-28 21:52 [PATCH V3 0/2] ARM: OMAP3+: support cpufreq-cpu0 for device tree boot Nishanth Menon
2013-03-28 21:52 ` Nishanth Menon
2013-03-28 21:52 ` [PATCH V3 1/2] ARM: OMAP3+: use cpu0-cpufreq driver in device tree supported boot Nishanth Menon
2013-03-28 21:52 ` Nishanth Menon
2013-04-03 18:47 ` Kevin Hilman
2013-04-03 18:47 ` Kevin Hilman
2013-04-04 2:52 ` Nishanth Menon
2013-04-04 5:13 ` Rajendra Nayak
2013-04-04 19:00 ` Nishanth Menon
2013-04-05 9:50 ` Rajendra Nayak
2013-04-05 11:26 ` Nishanth Menon
2013-04-05 16:13 ` Tony Lindgren
2013-04-05 16:32 ` Nishanth Menon
2013-04-05 17:05 ` Tony Lindgren
2013-04-05 17:17 ` Nishanth Menon
2013-04-05 19:28 ` Tony Lindgren
2013-04-05 20:02 ` Nishanth Menon
2013-04-05 21:10 ` Tony Lindgren
2013-04-05 21:32 ` Nishanth Menon
2013-04-05 21:40 ` Tony Lindgren
2013-04-05 22:10 ` Nishanth Menon
2013-04-05 22:17 ` Tony Lindgren
2013-04-05 22:23 ` Nishanth Menon
2013-03-28 21:52 ` Nishanth Menon [this message]
2013-03-28 21:52 ` [PATCH V3 2/2] cpufreq: OMAP: instantiate omap-cpufreq as a platform_driver Nishanth Menon
2013-03-29 2:59 ` Viresh Kumar
2013-04-05 17:07 ` Nishanth Menon
2013-04-05 21:34 ` Kevin Hilman
2013-04-05 21:34 ` Kevin Hilman
2013-04-05 21:36 ` Nishanth Menon
2013-04-03 17:47 ` [PATCH V3 0/2] ARM: OMAP3+: support cpufreq-cpu0 for device tree boot Kevin Hilman
2013-04-03 18:22 ` Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1364507576-19345-3-git-send-email-nm@ti.com \
--to=nm@ti.com \
--cc=b-cousson@ti.com \
--cc=cpufreq@vger.kernel.org \
--cc=j-keerthy@ti.com \
--cc=jon-hunter@ti.com \
--cc=khilman@linaro.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=paul@pwsan.com \
--cc=rnayak@ti.com \
--cc=robherring2@gmail.com \
--cc=santosh.shilimkar@ti.com \
--cc=shawn.guo@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.