From: arnd@arndb.de (Arnd Bergmann)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 1/7] USB: EHCI: make ehci-orion a separate driver
Date: Thu, 28 Mar 2013 22:54:59 +0100 [thread overview]
Message-ID: <1364507705-22012-2-git-send-email-arnd@arndb.de> (raw)
In-Reply-To: <1364507705-22012-1-git-send-email-arnd@arndb.de>
From: Manjunath Goudar <manjunath.goudar@linaro.org>
Separate the Orion host controller driver from ehci-hcd host
code into its own driver module because of following reason.
With the multiplatform changes in arm-soc tree, it becomes
possible to enable the mvebu platform (which uses
ehci-orion) at the same time as other platforms that require
a conflicting EHCI bus glue. At the moment, this results
in a warning like
drivers/usb/host/ehci-hcd.c:1297:0: warning: "PLATFORM_DRIVER" redefined [enabled by default]
drivers/usb/host/ehci-hcd.c:1277:0: note: this is the location of the previous definition
drivers/usb/host/ehci-orion.c:334:31: warning: 'ehci_orion_driver' defined but not used [-Wunused-variable]
and an ehci driver that only works on one of them.
With the infrastructure added by Alan Stern in patch 3e0232039
"USB: EHCI: prepare to make ehci-hcd a library module", we can
avoid this problem by turning a bus glue into a separate
module, as we do here for the orion bus glue.
An earlier version of this patch was included in 3.9 but caused
a regression there, which has subsequently been fixed.
In V3:
1.More detail provided in commit message regarding this patch.
2.Replaced hcd_name string "ehci-orion" into "orion-ehci".
3.MODULE_LICENSE is GPL v2.
4.In ehci_init_driver calling second argument passed as NULL instead of
ehci_orion_overrides because ehci_orion_overrides is removed.
In V2:
Tegra patch related changes removed from this patch.
Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Cc: Greg KH <greg@kroah.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
---
drivers/usb/host/Kconfig | 10 ++++++
drivers/usb/host/Makefile | 1 +
drivers/usb/host/ehci-hcd.c | 6 +---
drivers/usb/host/ehci-orion.c | 82 ++++++++++++++++++-------------------------
4 files changed, 47 insertions(+), 52 deletions(-)
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 2f68221..d89b7ad 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -163,6 +163,16 @@ config USB_EHCI_HCD_OMAP
Enables support for the on-chip EHCI controller on
OMAP3 and later chips.
+config USB_EHCI_HCD_ORION
+ tristate "Support for Marvell EBU on-chip EHCI USB controller"
+ depends on USB_EHCI_HCD && PLAT_ORION
+ default y
+ ---help---
+ Enables support for the on-chip EHCI controller on Marvell's
+ embedded ARM SoCs, including Orion, Kirkwood, Dove, Armada XP,
+ Armada 370. This is different from the EHCI implementation
+ on Marvell's mobile PXA and MMP SoC, see USB_EHCI_MV for those.
+
config USB_EHCI_MSM
bool "Support for MSM on-chip EHCI USB controller"
depends on USB_EHCI_HCD && ARCH_MSM
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 56de410..9492f50 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
obj-$(CONFIG_USB_EHCI_HCD_PLATFORM) += ehci-platform.o
obj-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o
obj-$(CONFIG_USB_EHCI_HCD_OMAP) += ehci-omap.o
+obj-$(CONFIG_USB_EHCI_HCD_ORION) += ehci-orion.o
obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index b12b97d..1f97268 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1249,11 +1249,6 @@ MODULE_LICENSE ("GPL");
#define XILINX_OF_PLATFORM_DRIVER ehci_hcd_xilinx_of_driver
#endif
-#ifdef CONFIG_PLAT_ORION
-#include "ehci-orion.c"
-#define PLATFORM_DRIVER ehci_orion_driver
-#endif
-
#ifdef CONFIG_USB_W90X900_EHCI
#include "ehci-w90x900.c"
#define PLATFORM_DRIVER ehci_hcd_w90x900_driver
@@ -1319,6 +1314,7 @@ MODULE_LICENSE ("GPL");
!IS_ENABLED(CONFIG_USB_CHIPIDEA_HOST) && \
!IS_ENABLED(CONFIG_USB_EHCI_MXC) && \
!IS_ENABLED(CONFIG_USB_EHCI_HCD_OMAP) && \
+ !IS_ENABLED(CONFIG_USB_EHCI_HCD_ORION) && \
!defined(PLATFORM_DRIVER) && \
!defined(PS3_SYSTEM_BUS_DRIVER) && \
!defined(OF_PLATFORM_DRIVER) && \
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 38c45fb..54c5794 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -17,6 +17,12 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+
+#include "ehci.h"
#define rdl(off) __raw_readl(hcd->regs + (off))
#define wrl(off, val) __raw_writel((val), hcd->regs + (off))
@@ -34,6 +40,12 @@
#define USB_PHY_IVREF_CTRL 0x440
#define USB_PHY_TST_GRP_CTRL 0x450
+#define DRIVER_DESC "EHCI orion driver"
+
+static const char hcd_name[] = "ehci-orion";
+
+static struct hc_driver __read_mostly ehci_orion_hc_driver;
+
/*
* Implement Orion USB controller specification guidelines
*/
@@ -104,51 +116,6 @@ static void orion_usb_phy_v1_setup(struct usb_hcd *hcd)
wrl(USB_MODE, 0x13);
}
-static const struct hc_driver ehci_orion_hc_driver = {
- .description = hcd_name,
- .product_desc = "Marvell Orion EHCI",
- .hcd_priv_size = sizeof(struct ehci_hcd),
-
- /*
- * generic hardware linkage
- */
- .irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2,
-
- /*
- * basic lifecycle operations
- */
- .reset = ehci_setup,
- .start = ehci_run,
- .stop = ehci_stop,
- .shutdown = ehci_shutdown,
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ehci_urb_enqueue,
- .urb_dequeue = ehci_urb_dequeue,
- .endpoint_disable = ehci_endpoint_disable,
- .endpoint_reset = ehci_endpoint_reset,
-
- /*
- * scheduling support
- */
- .get_frame_number = ehci_get_frame,
-
- /*
- * root hub support
- */
- .hub_status_data = ehci_hub_status_data,
- .hub_control = ehci_hub_control,
- .bus_suspend = ehci_bus_suspend,
- .bus_resume = ehci_bus_resume,
- .relinquish_port = ehci_relinquish_port,
- .port_handed_over = ehci_port_handed_over,
-
- .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-};
-
static void
ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
const struct mbus_dram_target_info *dram)
@@ -323,8 +290,6 @@ static int ehci_orion_drv_remove(struct platform_device *pdev)
return 0;
}
-MODULE_ALIAS("platform:orion-ehci");
-
static const struct of_device_id ehci_orion_dt_ids[] = {
{ .compatible = "marvell,orion-ehci", },
{},
@@ -341,3 +306,26 @@ static struct platform_driver ehci_orion_driver = {
.of_match_table = of_match_ptr(ehci_orion_dt_ids),
},
};
+
+static int __init ehci_orion_init(void)
+{
+ if (usb_disabled())
+ return -ENODEV;
+
+ pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+
+ ehci_init_driver(&ehci_orion_hc_driver, NULL);
+ return platform_driver_register(&ehci_orion_driver);
+}
+module_init(ehci_orion_init);
+
+static void __exit ehci_orion_cleanup(void)
+{
+ platform_driver_unregister(&ehci_orion_driver);
+}
+module_exit(ehci_orion_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_ALIAS("platform:orion-ehci");
+MODULE_AUTHOR("Tzachi Perelstein");
+MODULE_LICENSE("GPL v2");
--
1.8.1.2
WARNING: multiple messages have this Message-ID (diff)
From: Arnd Bergmann <arnd@arndb.de>
To: Alan Stern <stern@rowland.harvard.edu>
Cc: linux-usb@vger.kernel.org,
Manjunath Goudar <manjunath.goudar@linaro.org>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Greg KH <greg@kroah.com>,
Arnd Bergmann <arnd@arndb.de>,
Russell King <linux@arm.linux.org.uk>
Subject: [PATCH v3 1/7] USB: EHCI: make ehci-orion a separate driver
Date: Thu, 28 Mar 2013 22:54:59 +0100 [thread overview]
Message-ID: <1364507705-22012-2-git-send-email-arnd@arndb.de> (raw)
In-Reply-To: <1364507705-22012-1-git-send-email-arnd@arndb.de>
From: Manjunath Goudar <manjunath.goudar@linaro.org>
Separate the Orion host controller driver from ehci-hcd host
code into its own driver module because of following reason.
With the multiplatform changes in arm-soc tree, it becomes
possible to enable the mvebu platform (which uses
ehci-orion) at the same time as other platforms that require
a conflicting EHCI bus glue. At the moment, this results
in a warning like
drivers/usb/host/ehci-hcd.c:1297:0: warning: "PLATFORM_DRIVER" redefined [enabled by default]
drivers/usb/host/ehci-hcd.c:1277:0: note: this is the location of the previous definition
drivers/usb/host/ehci-orion.c:334:31: warning: 'ehci_orion_driver' defined but not used [-Wunused-variable]
and an ehci driver that only works on one of them.
With the infrastructure added by Alan Stern in patch 3e0232039
"USB: EHCI: prepare to make ehci-hcd a library module", we can
avoid this problem by turning a bus glue into a separate
module, as we do here for the orion bus glue.
An earlier version of this patch was included in 3.9 but caused
a regression there, which has subsequently been fixed.
In V3:
1.More detail provided in commit message regarding this patch.
2.Replaced hcd_name string "ehci-orion" into "orion-ehci".
3.MODULE_LICENSE is GPL v2.
4.In ehci_init_driver calling second argument passed as NULL instead of
ehci_orion_overrides because ehci_orion_overrides is removed.
In V2:
Tegra patch related changes removed from this patch.
Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Cc: Greg KH <greg@kroah.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
drivers/usb/host/Kconfig | 10 ++++++
drivers/usb/host/Makefile | 1 +
drivers/usb/host/ehci-hcd.c | 6 +---
drivers/usb/host/ehci-orion.c | 82 ++++++++++++++++++-------------------------
4 files changed, 47 insertions(+), 52 deletions(-)
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 2f68221..d89b7ad 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -163,6 +163,16 @@ config USB_EHCI_HCD_OMAP
Enables support for the on-chip EHCI controller on
OMAP3 and later chips.
+config USB_EHCI_HCD_ORION
+ tristate "Support for Marvell EBU on-chip EHCI USB controller"
+ depends on USB_EHCI_HCD && PLAT_ORION
+ default y
+ ---help---
+ Enables support for the on-chip EHCI controller on Marvell's
+ embedded ARM SoCs, including Orion, Kirkwood, Dove, Armada XP,
+ Armada 370. This is different from the EHCI implementation
+ on Marvell's mobile PXA and MMP SoC, see USB_EHCI_MV for those.
+
config USB_EHCI_MSM
bool "Support for MSM on-chip EHCI USB controller"
depends on USB_EHCI_HCD && ARCH_MSM
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 56de410..9492f50 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
obj-$(CONFIG_USB_EHCI_HCD_PLATFORM) += ehci-platform.o
obj-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o
obj-$(CONFIG_USB_EHCI_HCD_OMAP) += ehci-omap.o
+obj-$(CONFIG_USB_EHCI_HCD_ORION) += ehci-orion.o
obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index b12b97d..1f97268 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1249,11 +1249,6 @@ MODULE_LICENSE ("GPL");
#define XILINX_OF_PLATFORM_DRIVER ehci_hcd_xilinx_of_driver
#endif
-#ifdef CONFIG_PLAT_ORION
-#include "ehci-orion.c"
-#define PLATFORM_DRIVER ehci_orion_driver
-#endif
-
#ifdef CONFIG_USB_W90X900_EHCI
#include "ehci-w90x900.c"
#define PLATFORM_DRIVER ehci_hcd_w90x900_driver
@@ -1319,6 +1314,7 @@ MODULE_LICENSE ("GPL");
!IS_ENABLED(CONFIG_USB_CHIPIDEA_HOST) && \
!IS_ENABLED(CONFIG_USB_EHCI_MXC) && \
!IS_ENABLED(CONFIG_USB_EHCI_HCD_OMAP) && \
+ !IS_ENABLED(CONFIG_USB_EHCI_HCD_ORION) && \
!defined(PLATFORM_DRIVER) && \
!defined(PS3_SYSTEM_BUS_DRIVER) && \
!defined(OF_PLATFORM_DRIVER) && \
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 38c45fb..54c5794 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -17,6 +17,12 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+
+#include "ehci.h"
#define rdl(off) __raw_readl(hcd->regs + (off))
#define wrl(off, val) __raw_writel((val), hcd->regs + (off))
@@ -34,6 +40,12 @@
#define USB_PHY_IVREF_CTRL 0x440
#define USB_PHY_TST_GRP_CTRL 0x450
+#define DRIVER_DESC "EHCI orion driver"
+
+static const char hcd_name[] = "ehci-orion";
+
+static struct hc_driver __read_mostly ehci_orion_hc_driver;
+
/*
* Implement Orion USB controller specification guidelines
*/
@@ -104,51 +116,6 @@ static void orion_usb_phy_v1_setup(struct usb_hcd *hcd)
wrl(USB_MODE, 0x13);
}
-static const struct hc_driver ehci_orion_hc_driver = {
- .description = hcd_name,
- .product_desc = "Marvell Orion EHCI",
- .hcd_priv_size = sizeof(struct ehci_hcd),
-
- /*
- * generic hardware linkage
- */
- .irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2,
-
- /*
- * basic lifecycle operations
- */
- .reset = ehci_setup,
- .start = ehci_run,
- .stop = ehci_stop,
- .shutdown = ehci_shutdown,
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ehci_urb_enqueue,
- .urb_dequeue = ehci_urb_dequeue,
- .endpoint_disable = ehci_endpoint_disable,
- .endpoint_reset = ehci_endpoint_reset,
-
- /*
- * scheduling support
- */
- .get_frame_number = ehci_get_frame,
-
- /*
- * root hub support
- */
- .hub_status_data = ehci_hub_status_data,
- .hub_control = ehci_hub_control,
- .bus_suspend = ehci_bus_suspend,
- .bus_resume = ehci_bus_resume,
- .relinquish_port = ehci_relinquish_port,
- .port_handed_over = ehci_port_handed_over,
-
- .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-};
-
static void
ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
const struct mbus_dram_target_info *dram)
@@ -323,8 +290,6 @@ static int ehci_orion_drv_remove(struct platform_device *pdev)
return 0;
}
-MODULE_ALIAS("platform:orion-ehci");
-
static const struct of_device_id ehci_orion_dt_ids[] = {
{ .compatible = "marvell,orion-ehci", },
{},
@@ -341,3 +306,26 @@ static struct platform_driver ehci_orion_driver = {
.of_match_table = of_match_ptr(ehci_orion_dt_ids),
},
};
+
+static int __init ehci_orion_init(void)
+{
+ if (usb_disabled())
+ return -ENODEV;
+
+ pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+
+ ehci_init_driver(&ehci_orion_hc_driver, NULL);
+ return platform_driver_register(&ehci_orion_driver);
+}
+module_init(ehci_orion_init);
+
+static void __exit ehci_orion_cleanup(void)
+{
+ platform_driver_unregister(&ehci_orion_driver);
+}
+module_exit(ehci_orion_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_ALIAS("platform:orion-ehci");
+MODULE_AUTHOR("Tzachi Perelstein");
+MODULE_LICENSE("GPL v2");
--
1.8.1.2
next prev parent reply other threads:[~2013-03-28 21:54 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-28 21:54 [PATCH v3 0/7] USB EHCI multiplatform series again Arnd Bergmann
2013-03-28 21:54 ` Arnd Bergmann
2013-03-28 21:54 ` Arnd Bergmann [this message]
2013-03-28 21:54 ` [PATCH v3 1/7] USB: EHCI: make ehci-orion a separate driver Arnd Bergmann
2013-03-29 17:49 ` Alan Stern
2013-03-29 17:49 ` Alan Stern
2013-03-30 11:37 ` Arnd Bergmann
2013-03-30 11:37 ` Arnd Bergmann
2013-03-28 21:55 ` [PATCH v3 2/7] USB: EHCI: make ehci-spear " Arnd Bergmann
2013-03-28 21:55 ` Arnd Bergmann
2013-03-29 2:56 ` Viresh Kumar
2013-03-29 2:56 ` Viresh Kumar
2013-03-29 17:59 ` Alan Stern
2013-03-29 17:59 ` Alan Stern
2013-03-30 12:03 ` Arnd Bergmann
2013-03-30 12:03 ` Arnd Bergmann
2013-03-31 18:30 ` Arnd Bergmann
2013-03-31 18:30 ` Arnd Bergmann
2013-04-01 15:27 ` Alan Stern
2013-04-01 15:27 ` Alan Stern
2013-03-28 21:55 ` [PATCH v3 3/7] USB: EHCI: make ehci-s5p " Arnd Bergmann
2013-03-28 21:55 ` Arnd Bergmann
2013-03-29 19:41 ` Alan Stern
2013-03-29 19:41 ` Alan Stern
2013-03-30 12:22 ` Arnd Bergmann
2013-03-30 12:22 ` Arnd Bergmann
2013-03-28 21:55 ` [PATCH v3 4/7] USB: EHCI: export ehci_shutdown Arnd Bergmann
2013-03-28 21:55 ` Arnd Bergmann
2013-03-29 19:56 ` Alan Stern
2013-03-29 19:56 ` Alan Stern
2013-03-30 0:29 ` Geoff Levand
2013-03-30 0:29 ` Geoff Levand
2013-03-30 1:36 ` Alan Stern
2013-03-30 1:36 ` Alan Stern
2013-03-28 21:55 ` [PATCH v3 5/7] USB: EHCI: make ehci-atmel a separate driver Arnd Bergmann
2013-03-28 21:55 ` Arnd Bergmann
2013-03-29 20:02 ` Alan Stern
2013-03-29 20:02 ` Alan Stern
2013-03-30 7:15 ` Nicolas Ferre
2013-03-30 7:15 ` Nicolas Ferre
2013-03-30 12:29 ` Arnd Bergmann
2013-03-30 12:29 ` Arnd Bergmann
2013-03-28 21:55 ` [PATCH v3 6/7] USB: EHCI: make ehci-msm " Arnd Bergmann
2013-03-28 21:55 ` Arnd Bergmann
2013-03-29 20:12 ` Alan Stern
2013-03-29 20:12 ` Alan Stern
2013-03-30 12:49 ` Arnd Bergmann
2013-03-30 12:49 ` Arnd Bergmann
2013-04-01 22:17 ` David Brown
2013-04-01 22:17 ` David Brown
2013-03-28 21:55 ` [PATCH v3 7/7] USB: OHCI: avoid conflicting platform drivers Arnd Bergmann
2013-03-28 21:55 ` Arnd Bergmann
2013-03-29 20:15 ` Alan Stern
2013-03-29 20:15 ` Alan Stern
2013-03-30 12:56 ` Arnd Bergmann
2013-03-30 12:56 ` Arnd Bergmann
2013-04-01 15:29 ` Alan Stern
2013-04-01 15:29 ` Alan Stern
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1364507705-22012-2-git-send-email-arnd@arndb.de \
--to=arnd@arndb.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.