* [PATCH 0/3] wireless-regdb: a few regulatory updates @ 2013-04-09 5:52 ` Luis R. Rodriguez 0 siblings, 0 replies; 20+ messages in thread From: Luis R. Rodriguez @ 2013-04-09 5:52 UTC (permalink / raw) To: linville Cc: qca_vkondrat, yunsenw, kandala, wireless-regdb, green, linux-wireless, Luis R. Rodriguez From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> John, here's as few pending regulatory updates. Luis R. Rodriguez (3): wireless-regdb: enable HT40 in RU - Russian Federation wireless-regdb: enable VHT80 when world roaming wireless-regdb: add VHT channels 1..3 to world regdom db.txt | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) -- 1.7.10.4 ^ permalink raw reply [flat|nested] 20+ messages in thread
* [wireless-regdb] [PATCH 0/3] wireless-regdb: a few regulatory updates @ 2013-04-09 5:52 ` Luis R. Rodriguez 0 siblings, 0 replies; 20+ messages in thread From: Luis R. Rodriguez @ 2013-04-09 5:52 UTC (permalink / raw) To: linville Cc: wireless-regdb, kandala, Luis R. Rodriguez, linux-wireless, qca_vkondrat, green, yunsenw From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> John, here's as few pending regulatory updates. Luis R. Rodriguez (3): wireless-regdb: enable HT40 in RU - Russian Federation wireless-regdb: enable VHT80 when world roaming wireless-regdb: add VHT channels 1..3 to world regdom db.txt | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) -- 1.7.10.4 _______________________________________________ wireless-regdb mailing list wireless-regdb@lists.infradead.org http://lists.infradead.org/mailman/listinfo/wireless-regdb ^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH 1/3] wireless-regdb: enable HT40 in RU - Russian Federation 2013-04-09 5:52 ` [wireless-regdb] " Luis R. Rodriguez @ 2013-04-09 5:52 ` Luis R. Rodriguez -1 siblings, 0 replies; 20+ messages in thread From: Luis R. Rodriguez @ 2013-04-09 5:52 UTC (permalink / raw) To: linville Cc: qca_vkondrat, yunsenw, kandala, wireless-regdb, green, linux-wireless, Luis R. Rodriguez From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> As per QCA the Russian Federation (RU) enables HT40 on the 5 GHz band as follows. This has been verified by actual product submission and product certification. Band [MHz] Max BW [MHz] Max gain Max EIRP [dBm (mW)] 5170-5330 40 N/A 20.00 (100.00) 5650-5710 40 N/A 30.00 (1000.00) 5735.000 - 5835.000 40 N/A 30.00 (1000.00) Prior to this we didn't have HT40 allowed on RU at all. This patch changes this and splits the 5 GHz band into two segments which allow two different max EIRP values. Exact details on the 5 GHz QCA work for Russia you can refer to this PDF: http://lists.infradead.org/pipermail/wireless-regdb/attachments/20130125/29d3fa1f/attachment-0001.pdf Originally submitted to the list by Michael Green. Cc: Yunsen Wang <yunsenw@qca.qualcomm.com> Cc: Michael Green <green@qca.qualcomm.com> Cc: wireless-regdb@lists.infradead.org Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> --- db.txt | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/db.txt b/db.txt index c5861b8..2d09a3c 100644 --- a/db.txt +++ b/db.txt @@ -654,7 +654,9 @@ country RS: country RU: (2402 - 2482 @ 40), (N/A, 20) - (5735 - 5835 @ 20), (N/A, 30) + (5170 - 5330 @ 40), (N/A, 20) + (5650 - 5710 @ 40), (N/A, 30) + (5735 - 5835 @ 40), (N/A, 30) country RW: (2402 - 2482 @ 40), (N/A, 20) -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 20+ messages in thread
* [wireless-regdb] [PATCH 1/3] wireless-regdb: enable HT40 in RU - Russian Federation @ 2013-04-09 5:52 ` Luis R. Rodriguez 0 siblings, 0 replies; 20+ messages in thread From: Luis R. Rodriguez @ 2013-04-09 5:52 UTC (permalink / raw) To: linville Cc: wireless-regdb, kandala, Luis R. Rodriguez, linux-wireless, qca_vkondrat, green, yunsenw From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> As per QCA the Russian Federation (RU) enables HT40 on the 5 GHz band as follows. This has been verified by actual product submission and product certification. Band [MHz] Max BW [MHz] Max gain Max EIRP [dBm (mW)] 5170-5330 40 N/A 20.00 (100.00) 5650-5710 40 N/A 30.00 (1000.00) 5735.000 - 5835.000 40 N/A 30.00 (1000.00) Prior to this we didn't have HT40 allowed on RU at all. This patch changes this and splits the 5 GHz band into two segments which allow two different max EIRP values. Exact details on the 5 GHz QCA work for Russia you can refer to this PDF: http://lists.infradead.org/pipermail/wireless-regdb/attachments/20130125/29d3fa1f/attachment-0001.pdf Originally submitted to the list by Michael Green. Cc: Yunsen Wang <yunsenw@qca.qualcomm.com> Cc: Michael Green <green@qca.qualcomm.com> Cc: wireless-regdb@lists.infradead.org Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> --- db.txt | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/db.txt b/db.txt index c5861b8..2d09a3c 100644 --- a/db.txt +++ b/db.txt @@ -654,7 +654,9 @@ country RS: country RU: (2402 - 2482 @ 40), (N/A, 20) - (5735 - 5835 @ 20), (N/A, 30) + (5170 - 5330 @ 40), (N/A, 20) + (5650 - 5710 @ 40), (N/A, 30) + (5735 - 5835 @ 40), (N/A, 30) country RW: (2402 - 2482 @ 40), (N/A, 20) -- 1.7.10.4 _______________________________________________ wireless-regdb mailing list wireless-regdb@lists.infradead.org http://lists.infradead.org/mailman/listinfo/wireless-regdb ^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 2/3] wireless-regdb: enable VHT80 when world roaming 2013-04-09 5:52 ` [wireless-regdb] " Luis R. Rodriguez @ 2013-04-09 5:52 ` Luis R. Rodriguez -1 siblings, 0 replies; 20+ messages in thread From: Luis R. Rodriguez @ 2013-04-09 5:52 UTC (permalink / raw) To: linville Cc: qca_vkondrat, yunsenw, kandala, wireless-regdb, green, linux-wireless, Luis R. Rodriguez From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> For VHT, the wider bandwidths (up to 160 MHz) need to be allowed. Since world roaming only covers the case of connecting to an AP, it can be opened up there, we will rely on the AP to know the local regulations. Based on a patch by Johannes Berg for upstream Linux. Cc: Yunsen Wang <yunsenw@qca.qualcomm.com> Cc: Michael Green <green@qca.qualcomm.com> Cc: wireless-regdb@lists.infradead.org Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> --- db.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/db.txt b/db.txt index 2d09a3c..ae0f83d 100644 --- a/db.txt +++ b/db.txt @@ -6,10 +6,10 @@ country 00: # Channel 14. Only JP enables this and for 802.11b only (2474 - 2494 @ 20), (3, 20), PASSIVE-SCAN, NO-IBSS, NO-OFDM # Channel 36 - 48 - (5170 - 5250 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS + (5170 - 5250 @ 80), (3, 20), PASSIVE-SCAN, NO-IBSS # NB: 5260 MHz - 5700 MHz requies DFS # Channel 149 - 165 - (5735 - 5835 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS + (5735 - 5835 @ 80), (3, 20), PASSIVE-SCAN, NO-IBSS country AD: -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 20+ messages in thread
* [wireless-regdb] [PATCH 2/3] wireless-regdb: enable VHT80 when world roaming @ 2013-04-09 5:52 ` Luis R. Rodriguez 0 siblings, 0 replies; 20+ messages in thread From: Luis R. Rodriguez @ 2013-04-09 5:52 UTC (permalink / raw) To: linville Cc: wireless-regdb, kandala, Luis R. Rodriguez, linux-wireless, qca_vkondrat, green, yunsenw From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> For VHT, the wider bandwidths (up to 160 MHz) need to be allowed. Since world roaming only covers the case of connecting to an AP, it can be opened up there, we will rely on the AP to know the local regulations. Based on a patch by Johannes Berg for upstream Linux. Cc: Yunsen Wang <yunsenw@qca.qualcomm.com> Cc: Michael Green <green@qca.qualcomm.com> Cc: wireless-regdb@lists.infradead.org Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> --- db.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/db.txt b/db.txt index 2d09a3c..ae0f83d 100644 --- a/db.txt +++ b/db.txt @@ -6,10 +6,10 @@ country 00: # Channel 14. Only JP enables this and for 802.11b only (2474 - 2494 @ 20), (3, 20), PASSIVE-SCAN, NO-IBSS, NO-OFDM # Channel 36 - 48 - (5170 - 5250 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS + (5170 - 5250 @ 80), (3, 20), PASSIVE-SCAN, NO-IBSS # NB: 5260 MHz - 5700 MHz requies DFS # Channel 149 - 165 - (5735 - 5835 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS + (5735 - 5835 @ 80), (3, 20), PASSIVE-SCAN, NO-IBSS country AD: -- 1.7.10.4 _______________________________________________ wireless-regdb mailing list wireless-regdb@lists.infradead.org http://lists.infradead.org/mailman/listinfo/wireless-regdb ^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: [wireless-regdb] [PATCH 2/3] wireless-regdb: enable VHT80 when world roaming 2013-04-09 5:52 ` [wireless-regdb] " Luis R. Rodriguez @ 2013-04-09 6:51 ` Johannes Berg -1 siblings, 0 replies; 20+ messages in thread From: Johannes Berg @ 2013-04-09 6:51 UTC (permalink / raw) To: Luis R. Rodriguez Cc: linville, wireless-regdb, kandala, linux-wireless, qca_vkondrat, green, yunsenw On Mon, 2013-04-08 at 22:52 -0700, Luis R. Rodriguez wrote: > From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> > > For VHT, the wider bandwidths (up to 160 MHz) need > to be allowed. Since world roaming only covers the > case of connecting to an AP, it can be opened up > there, we will rely on the AP to know the local > regulations. > > Based on a patch by Johannes Berg for upstream Linux. > --- a/db.txt > +++ b/db.txt > @@ -6,10 +6,10 @@ country 00: > # Channel 14. Only JP enables this and for 802.11b only > (2474 - 2494 @ 20), (3, 20), PASSIVE-SCAN, NO-IBSS, NO-OFDM > # Channel 36 - 48 > - (5170 - 5250 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS > + (5170 - 5250 @ 80), (3, 20), PASSIVE-SCAN, NO-IBSS > # NB: 5260 MHz - 5700 MHz requies DFS > # Channel 149 - 165 > - (5735 - 5835 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS > + (5735 - 5835 @ 80), (3, 20), PASSIVE-SCAN, NO-IBSS I also have a separate upstream patch that I haven't sent here yet to enable 160 MHz by enabling the radar channels (passively), see below; any thoughts on that? --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -184,11 +184,21 @@ static const struct ieee80211_regdomain world_regdom = { NL80211_RRF_NO_IBSS | NL80211_RRF_NO_OFDM), /* IEEE 802.11a, channel 36..48 */ - REG_RULE(5180-10, 5240+10, 80, 6, 20, + REG_RULE(5180-10, 5240+10, 160, 6, 20, NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_IBSS), - /* NB: 5260 MHz - 5700 MHz requires DFS */ + /* IEEE 802.11a, channel 52..64 - DFS required */ + REG_RULE(5260-10, 5320+10, 160, 6, 20, + NL80211_RRF_PASSIVE_SCAN | + NL80211_RRF_NO_IBSS | + NL80211_RRF_DFS), + + /* IEEE 802.11a, channel 100..144 - DFS required */ + REG_RULE(5500-10, 5720+10, 160, 6, 20, + NL80211_RRF_PASSIVE_SCAN | + NL80211_RRF_NO_IBSS | + NL80211_RRF_DFS), /* IEEE 802.11a, channel 149..165 */ REG_RULE(5745-10, 5825+10, 80, 6, 20, johannes ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [wireless-regdb] [PATCH 2/3] wireless-regdb: enable VHT80 when world roaming @ 2013-04-09 6:51 ` Johannes Berg 0 siblings, 0 replies; 20+ messages in thread From: Johannes Berg @ 2013-04-09 6:51 UTC (permalink / raw) To: Luis R. Rodriguez Cc: wireless-regdb, kandala, linux-wireless, linville, qca_vkondrat, green, yunsenw On Mon, 2013-04-08 at 22:52 -0700, Luis R. Rodriguez wrote: > From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> > > For VHT, the wider bandwidths (up to 160 MHz) need > to be allowed. Since world roaming only covers the > case of connecting to an AP, it can be opened up > there, we will rely on the AP to know the local > regulations. > > Based on a patch by Johannes Berg for upstream Linux. > --- a/db.txt > +++ b/db.txt > @@ -6,10 +6,10 @@ country 00: > # Channel 14. Only JP enables this and for 802.11b only > (2474 - 2494 @ 20), (3, 20), PASSIVE-SCAN, NO-IBSS, NO-OFDM > # Channel 36 - 48 > - (5170 - 5250 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS > + (5170 - 5250 @ 80), (3, 20), PASSIVE-SCAN, NO-IBSS > # NB: 5260 MHz - 5700 MHz requies DFS > # Channel 149 - 165 > - (5735 - 5835 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS > + (5735 - 5835 @ 80), (3, 20), PASSIVE-SCAN, NO-IBSS I also have a separate upstream patch that I haven't sent here yet to enable 160 MHz by enabling the radar channels (passively), see below; any thoughts on that? --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -184,11 +184,21 @@ static const struct ieee80211_regdomain world_regdom = { NL80211_RRF_NO_IBSS | NL80211_RRF_NO_OFDM), /* IEEE 802.11a, channel 36..48 */ - REG_RULE(5180-10, 5240+10, 80, 6, 20, + REG_RULE(5180-10, 5240+10, 160, 6, 20, NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_IBSS), - /* NB: 5260 MHz - 5700 MHz requires DFS */ + /* IEEE 802.11a, channel 52..64 - DFS required */ + REG_RULE(5260-10, 5320+10, 160, 6, 20, + NL80211_RRF_PASSIVE_SCAN | + NL80211_RRF_NO_IBSS | + NL80211_RRF_DFS), + + /* IEEE 802.11a, channel 100..144 - DFS required */ + REG_RULE(5500-10, 5720+10, 160, 6, 20, + NL80211_RRF_PASSIVE_SCAN | + NL80211_RRF_NO_IBSS | + NL80211_RRF_DFS), /* IEEE 802.11a, channel 149..165 */ REG_RULE(5745-10, 5825+10, 80, 6, 20, johannes _______________________________________________ wireless-regdb mailing list wireless-regdb@lists.infradead.org http://lists.infradead.org/mailman/listinfo/wireless-regdb ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [wireless-regdb] [PATCH 2/3] wireless-regdb: enable VHT80 when world roaming 2013-04-09 6:51 ` Johannes Berg @ 2013-04-09 8:26 ` Luis R. Rodriguez -1 siblings, 0 replies; 20+ messages in thread From: Luis R. Rodriguez @ 2013-04-09 8:26 UTC (permalink / raw) To: Johannes Berg Cc: John W. Linville, wireless-regdb@lists.infradead.org, kandala, linux-wireless, qca_vkondrat, Michael Green, yunsenw On Mon, Apr 8, 2013 at 11:51 PM, Johannes Berg <johannes@sipsolutions.net> wrote: > On Mon, 2013-04-08 at 22:52 -0700, Luis R. Rodriguez wrote: >> From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> >> >> For VHT, the wider bandwidths (up to 160 MHz) need >> to be allowed. Since world roaming only covers the >> case of connecting to an AP, it can be opened up >> there, we will rely on the AP to know the local >> regulations. >> >> Based on a patch by Johannes Berg for upstream Linux. > >> --- a/db.txt >> +++ b/db.txt >> @@ -6,10 +6,10 @@ country 00: >> # Channel 14. Only JP enables this and for 802.11b only >> (2474 - 2494 @ 20), (3, 20), PASSIVE-SCAN, NO-IBSS, NO-OFDM >> # Channel 36 - 48 >> - (5170 - 5250 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS >> + (5170 - 5250 @ 80), (3, 20), PASSIVE-SCAN, NO-IBSS >> # NB: 5260 MHz - 5700 MHz requies DFS >> # Channel 149 - 165 >> - (5735 - 5835 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS >> + (5735 - 5835 @ 80), (3, 20), PASSIVE-SCAN, NO-IBSS > > I also have a separate upstream patch that I haven't sent here yet to > enable 160 MHz by enabling the radar channels (passively), see below; > any thoughts on that? Enabling it passively seems fine to me. Michael if we take care of DFS / passive scan, etc, are we still OK to use VHT160 if we find an AP that uses it on the DFS channels (assuming client follows channel change announcements, etc)? Luis ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [wireless-regdb] [PATCH 2/3] wireless-regdb: enable VHT80 when world roaming @ 2013-04-09 8:26 ` Luis R. Rodriguez 0 siblings, 0 replies; 20+ messages in thread From: Luis R. Rodriguez @ 2013-04-09 8:26 UTC (permalink / raw) To: Johannes Berg Cc: wireless-regdb@lists.infradead.org, kandala, linux-wireless, John W. Linville, qca_vkondrat, Michael Green, yunsenw On Mon, Apr 8, 2013 at 11:51 PM, Johannes Berg <johannes@sipsolutions.net> wrote: > On Mon, 2013-04-08 at 22:52 -0700, Luis R. Rodriguez wrote: >> From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> >> >> For VHT, the wider bandwidths (up to 160 MHz) need >> to be allowed. Since world roaming only covers the >> case of connecting to an AP, it can be opened up >> there, we will rely on the AP to know the local >> regulations. >> >> Based on a patch by Johannes Berg for upstream Linux. > >> --- a/db.txt >> +++ b/db.txt >> @@ -6,10 +6,10 @@ country 00: >> # Channel 14. Only JP enables this and for 802.11b only >> (2474 - 2494 @ 20), (3, 20), PASSIVE-SCAN, NO-IBSS, NO-OFDM >> # Channel 36 - 48 >> - (5170 - 5250 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS >> + (5170 - 5250 @ 80), (3, 20), PASSIVE-SCAN, NO-IBSS >> # NB: 5260 MHz - 5700 MHz requies DFS >> # Channel 149 - 165 >> - (5735 - 5835 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS >> + (5735 - 5835 @ 80), (3, 20), PASSIVE-SCAN, NO-IBSS > > I also have a separate upstream patch that I haven't sent here yet to > enable 160 MHz by enabling the radar channels (passively), see below; > any thoughts on that? Enabling it passively seems fine to me. Michael if we take care of DFS / passive scan, etc, are we still OK to use VHT160 if we find an AP that uses it on the DFS channels (assuming client follows channel change announcements, etc)? Luis _______________________________________________ wireless-regdb mailing list wireless-regdb@lists.infradead.org http://lists.infradead.org/mailman/listinfo/wireless-regdb ^ permalink raw reply [flat|nested] 20+ messages in thread
* [wireless-regdb] [PATCH 2/3] wireless-regdb: enable VHT80 when world roaming 2013-04-09 8:26 ` Luis R. Rodriguez @ 2013-04-09 13:54 ` Green, Michael -1 siblings, 0 replies; 20+ messages in thread From: Green, Michael @ 2013-04-09 13:54 UTC (permalink / raw) To: Luis R. Rodriguez, Johannes Berg Cc: John W. Linville, wireless-regdb@lists.infradead.org, Kandala, Srinivas, linux-wireless, qca_vkondrat, Wang, Yunsen SWYgdGhpcyBkaXNjdXNzaW9uIGlzIGFib3V0IEphcGFuLCB0aGVuIHllcywgVkhUMTYwIG9uIHRo ZSBhbGxvd2VkIGNoYW5uZWxzIGZvciBKYXBhbiwgY2FuIGJlIGVuYWJsZWQgbm93Lg0KDQpPciBp cyB0aGUgcXVlc3Rpb24gYWJvdXQgZW5hYmxpbmcgVkhUODAgJiBWSFQxNjAgaW4gd29ybGQgbW9k ZShzKSB1c2luZyBwYXNzaXZlIHNjYW5uaW5nPw0KDQpNaWNoYWVsIEdyZWVuDQpncmVlbkBxY2Eu cXVhbGNvbW0uY29tDQoNClF1YWxjb21tIEF0aGVyb3MsIEluYy4NCjc4MS00MDAtMTQ5MSAob2Zm aWNlKQ0KNTA4LTM4MC00OTIxIChjZWxsKQ0KDQoNCi0tLS0tT3JpZ2luYWwgTWVzc2FnZS0tLS0t DQpGcm9tOiBtY2dyb2ZAZ21haWwuY29tIFttYWlsdG86bWNncm9mQGdtYWlsLmNvbV0gT24gQmVo YWxmIE9mIEx1aXMgUi4gUm9kcmlndWV6DQpTZW50OiBUdWVzZGF5LCBBcHJpbCAwOSwgMjAxMyA0 OjI2IEFNDQpUbzogSm9oYW5uZXMgQmVyZw0KQ2M6IEpvaG4gVy4gTGludmlsbGU7IHdpcmVsZXNz LXJlZ2RiQGxpc3RzLmluZnJhZGVhZC5vcmc7IEthbmRhbGEsIFNyaW5pdmFzOyBsaW51eC13aXJl bGVzczsgcWNhX3Zrb25kcmF0OyBHcmVlbiwgTWljaGFlbDsgV2FuZywgWXVuc2VuDQpTdWJqZWN0 OiBSZTogW3dpcmVsZXNzLXJlZ2RiXSBbUEFUQ0ggMi8zXSB3aXJlbGVzcy1yZWdkYjogZW5hYmxl IFZIVDgwIHdoZW4gd29ybGQgcm9hbWluZw0KDQpPbiBNb24sIEFwciA4LCAyMDEzIGF0IDExOjUx IFBNLCBKb2hhbm5lcyBCZXJnIDxqb2hhbm5lc0BzaXBzb2x1dGlvbnMubmV0PiB3cm90ZToNCj4g T24gTW9uLCAyMDEzLTA0LTA4IGF0IDIyOjUyIC0wNzAwLCBMdWlzIFIuIFJvZHJpZ3VleiB3cm90 ZToNCj4+IEZyb206ICJMdWlzIFIuIFJvZHJpZ3VleiIgPG1jZ3JvZkBkby1ub3QtcGFuaWMuY29t Pg0KPj4NCj4+IEZvciBWSFQsIHRoZSB3aWRlciBiYW5kd2lkdGhzICh1cCB0byAxNjAgTUh6KSBu ZWVkIHRvIGJlIGFsbG93ZWQuIA0KPj4gU2luY2Ugd29ybGQgcm9hbWluZyBvbmx5IGNvdmVycyB0 aGUgY2FzZSBvZiBjb25uZWN0aW5nIHRvIGFuIEFQLCBpdCANCj4+IGNhbiBiZSBvcGVuZWQgdXAg dGhlcmUsIHdlIHdpbGwgcmVseSBvbiB0aGUgQVAgdG8ga25vdyB0aGUgbG9jYWwgDQo+PiByZWd1 bGF0aW9ucy4NCj4+DQo+PiBCYXNlZCBvbiBhIHBhdGNoIGJ5IEpvaGFubmVzIEJlcmcgZm9yIHVw c3RyZWFtIExpbnV4Lg0KPg0KPj4gLS0tIGEvZGIudHh0DQo+PiArKysgYi9kYi50eHQNCj4+IEBA IC02LDEwICs2LDEwIEBAIGNvdW50cnkgMDA6DQo+PiAgICAgICAjIENoYW5uZWwgMTQuIE9ubHkg SlAgZW5hYmxlcyB0aGlzIGFuZCBmb3IgODAyLjExYiBvbmx5DQo+PiAgICAgICAoMjQ3NCAtIDI0 OTQgQCAyMCksICgzLCAyMCksIFBBU1NJVkUtU0NBTiwgTk8tSUJTUywgTk8tT0ZETQ0KPj4gICAg ICAgIyBDaGFubmVsIDM2IC0gNDgNCj4+IC0gICAgICg1MTcwIC0gNTI1MCBAIDQwKSwgKDMsIDIw KSwgUEFTU0lWRS1TQ0FOLCBOTy1JQlNTDQo+PiArICAgICAoNTE3MCAtIDUyNTAgQCA4MCksICgz LCAyMCksIFBBU1NJVkUtU0NBTiwgTk8tSUJTUw0KPj4gICAgICAgIyBOQjogNTI2MCBNSHogLSA1 NzAwIE1IeiByZXF1aWVzIERGUw0KPj4gICAgICAgIyBDaGFubmVsIDE0OSAtIDE2NQ0KPj4gLSAg ICAgKDU3MzUgLSA1ODM1IEAgNDApLCAoMywgMjApLCBQQVNTSVZFLVNDQU4sIE5PLUlCU1MNCj4+ ICsgICAgICg1NzM1IC0gNTgzNSBAIDgwKSwgKDMsIDIwKSwgUEFTU0lWRS1TQ0FOLCBOTy1JQlNT DQo+DQo+IEkgYWxzbyBoYXZlIGEgc2VwYXJhdGUgdXBzdHJlYW0gcGF0Y2ggdGhhdCBJIGhhdmVu J3Qgc2VudCBoZXJlIHlldCB0byANCj4gZW5hYmxlIDE2MCBNSHogYnkgZW5hYmxpbmcgdGhlIHJh ZGFyIGNoYW5uZWxzIChwYXNzaXZlbHkpLCBzZWUgYmVsb3c7IA0KPiBhbnkgdGhvdWdodHMgb24g dGhhdD8NCg0KRW5hYmxpbmcgaXQgcGFzc2l2ZWx5IHNlZW1zIGZpbmUgdG8gbWUuIE1pY2hhZWwg aWYgd2UgdGFrZSBjYXJlIG9mIERGUyAvIHBhc3NpdmUgc2NhbiwgZXRjLCBhcmUgd2Ugc3RpbGwg T0sgdG8gdXNlIFZIVDE2MCBpZiB3ZSBmaW5kIGFuIEFQIHRoYXQgdXNlcyBpdCBvbiB0aGUgREZT IGNoYW5uZWxzIChhc3N1bWluZyBjbGllbnQgZm9sbG93cyBjaGFubmVsIGNoYW5nZSBhbm5vdW5j ZW1lbnRzLCBldGMpPw0KDQogIEx1aXMNCg== ^ permalink raw reply [flat|nested] 20+ messages in thread
* [wireless-regdb] [PATCH 2/3] wireless-regdb: enable VHT80 when world roaming @ 2013-04-09 13:54 ` Green, Michael 0 siblings, 0 replies; 20+ messages in thread From: Green, Michael @ 2013-04-09 13:54 UTC (permalink / raw) To: Luis R. Rodriguez, Johannes Berg Cc: wireless-regdb@lists.infradead.org, Kandala, Srinivas, linux-wireless, John W. Linville, qca_vkondrat, Wang, Yunsen If this discussion is about Japan, then yes, VHT160 on the allowed channels for Japan, can be enabled now. Or is the question about enabling VHT80 & VHT160 in world mode(s) using passive scanning? Michael Green green@qca.qualcomm.com Qualcomm Atheros, Inc. 781-400-1491 (office) 508-380-4921 (cell) -----Original Message----- From: mcgrof@gmail.com [mailto:mcgrof@gmail.com] On Behalf Of Luis R. Rodriguez Sent: Tuesday, April 09, 2013 4:26 AM To: Johannes Berg Cc: John W. Linville; wireless-regdb@lists.infradead.org; Kandala, Srinivas; linux-wireless; qca_vkondrat; Green, Michael; Wang, Yunsen Subject: Re: [wireless-regdb] [PATCH 2/3] wireless-regdb: enable VHT80 when world roaming On Mon, Apr 8, 2013 at 11:51 PM, Johannes Berg <johannes@sipsolutions.net> wrote: > On Mon, 2013-04-08 at 22:52 -0700, Luis R. Rodriguez wrote: >> From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> >> >> For VHT, the wider bandwidths (up to 160 MHz) need to be allowed. >> Since world roaming only covers the case of connecting to an AP, it >> can be opened up there, we will rely on the AP to know the local >> regulations. >> >> Based on a patch by Johannes Berg for upstream Linux. > >> --- a/db.txt >> +++ b/db.txt >> @@ -6,10 +6,10 @@ country 00: >> # Channel 14. Only JP enables this and for 802.11b only >> (2474 - 2494 @ 20), (3, 20), PASSIVE-SCAN, NO-IBSS, NO-OFDM >> # Channel 36 - 48 >> - (5170 - 5250 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS >> + (5170 - 5250 @ 80), (3, 20), PASSIVE-SCAN, NO-IBSS >> # NB: 5260 MHz - 5700 MHz requies DFS >> # Channel 149 - 165 >> - (5735 - 5835 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS >> + (5735 - 5835 @ 80), (3, 20), PASSIVE-SCAN, NO-IBSS > > I also have a separate upstream patch that I haven't sent here yet to > enable 160 MHz by enabling the radar channels (passively), see below; > any thoughts on that? Enabling it passively seems fine to me. Michael if we take care of DFS / passive scan, etc, are we still OK to use VHT160 if we find an AP that uses it on the DFS channels (assuming client follows channel change announcements, etc)? Luis _______________________________________________ wireless-regdb mailing list wireless-regdb@lists.infradead.org http://lists.infradead.org/mailman/listinfo/wireless-regdb ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [wireless-regdb] [PATCH 2/3] wireless-regdb: enable VHT80 when world roaming 2013-04-09 13:54 ` Green, Michael @ 2013-04-10 7:22 ` Luis R. Rodriguez -1 siblings, 0 replies; 20+ messages in thread From: Luis R. Rodriguez @ 2013-04-10 7:22 UTC (permalink / raw) To: Green, Michael Cc: Johannes Berg, John W. Linville, wireless-regdb@lists.infradead.org, Kandala, Srinivas, linux-wireless, qca_vkondrat, Wang, Yunsen On Tue, Apr 9, 2013 at 6:54 AM, Green, Michael <green@qca.qualcomm.com> wrote: > If this discussion is about Japan, then yes, VHT160 on the allowed channels for Japan, can be enabled now. Oh neat, well this is good to know! I sent a patch. > Or is the question about enabling VHT80 & VHT160 in world mode(s) using passive scanning? The question was about that. Luis ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [wireless-regdb] [PATCH 2/3] wireless-regdb: enable VHT80 when world roaming @ 2013-04-10 7:22 ` Luis R. Rodriguez 0 siblings, 0 replies; 20+ messages in thread From: Luis R. Rodriguez @ 2013-04-10 7:22 UTC (permalink / raw) To: Green, Michael Cc: wireless-regdb@lists.infradead.org, Kandala, Srinivas, linux-wireless, John W. Linville, qca_vkondrat, Johannes Berg, Wang, Yunsen On Tue, Apr 9, 2013 at 6:54 AM, Green, Michael <green@qca.qualcomm.com> wrote: > If this discussion is about Japan, then yes, VHT160 on the allowed channels for Japan, can be enabled now. Oh neat, well this is good to know! I sent a patch. > Or is the question about enabling VHT80 & VHT160 in world mode(s) using passive scanning? The question was about that. Luis _______________________________________________ wireless-regdb mailing list wireless-regdb@lists.infradead.org http://lists.infradead.org/mailman/listinfo/wireless-regdb ^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH 3/3] wireless-regdb: add VHT channels 1..3 to world regdom 2013-04-09 5:52 ` [wireless-regdb] " Luis R. Rodriguez @ 2013-04-09 5:52 ` Luis R. Rodriguez -1 siblings, 0 replies; 20+ messages in thread From: Luis R. Rodriguez @ 2013-04-09 5:52 UTC (permalink / raw) To: linville Cc: qca_vkondrat, yunsenw, kandala, wireless-regdb, green, linux-wireless, Luis R. Rodriguez From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> This is a port of what Vladimir Kondratiev sent to the Linux kernel for the static world regulatory domain. Cc: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Cc: Yunsen Wang <yunsenw@qca.qualcomm.com> Cc: wireless-regdb@lists.infradead.org Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> --- db.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/db.txt b/db.txt index ae0f83d..5657c11 100644 --- a/db.txt +++ b/db.txt @@ -10,6 +10,8 @@ country 00: # NB: 5260 MHz - 5700 MHz requies DFS # Channel 149 - 165 (5735 - 5835 @ 80), (3, 20), PASSIVE-SCAN, NO-IBSS + # IEEE 802.11ad (60gHz), channels 1..3 + (57240 - 63720 @ 2160), (N/A, 0) country AD: -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 20+ messages in thread
* [wireless-regdb] [PATCH 3/3] wireless-regdb: add VHT channels 1..3 to world regdom @ 2013-04-09 5:52 ` Luis R. Rodriguez 0 siblings, 0 replies; 20+ messages in thread From: Luis R. Rodriguez @ 2013-04-09 5:52 UTC (permalink / raw) To: linville Cc: wireless-regdb, kandala, Luis R. Rodriguez, linux-wireless, qca_vkondrat, green, yunsenw From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> This is a port of what Vladimir Kondratiev sent to the Linux kernel for the static world regulatory domain. Cc: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Cc: Yunsen Wang <yunsenw@qca.qualcomm.com> Cc: wireless-regdb@lists.infradead.org Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> --- db.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/db.txt b/db.txt index ae0f83d..5657c11 100644 --- a/db.txt +++ b/db.txt @@ -10,6 +10,8 @@ country 00: # NB: 5260 MHz - 5700 MHz requies DFS # Channel 149 - 165 (5735 - 5835 @ 80), (3, 20), PASSIVE-SCAN, NO-IBSS + # IEEE 802.11ad (60gHz), channels 1..3 + (57240 - 63720 @ 2160), (N/A, 0) country AD: -- 1.7.10.4 _______________________________________________ wireless-regdb mailing list wireless-regdb@lists.infradead.org http://lists.infradead.org/mailman/listinfo/wireless-regdb ^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: [PATCH 3/3] wireless-regdb: add VHT channels 1..3 to world regdom 2013-04-09 5:52 ` [wireless-regdb] " Luis R. Rodriguez @ 2013-04-09 6:52 ` Johannes Berg -1 siblings, 0 replies; 20+ messages in thread From: Johannes Berg @ 2013-04-09 6:52 UTC (permalink / raw) To: Luis R. Rodriguez Cc: linville, qca_vkondrat, yunsenw, kandala, wireless-regdb, green, linux-wireless Subject is wrong -- this isn't VHT but 60G johannes ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [wireless-regdb] [PATCH 3/3] wireless-regdb: add VHT channels 1..3 to world regdom @ 2013-04-09 6:52 ` Johannes Berg 0 siblings, 0 replies; 20+ messages in thread From: Johannes Berg @ 2013-04-09 6:52 UTC (permalink / raw) To: Luis R. Rodriguez Cc: wireless-regdb, kandala, linux-wireless, linville, qca_vkondrat, green, yunsenw Subject is wrong -- this isn't VHT but 60G johannes _______________________________________________ wireless-regdb mailing list wireless-regdb@lists.infradead.org http://lists.infradead.org/mailman/listinfo/wireless-regdb ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 3/3] wireless-regdb: add VHT channels 1..3 to world regdom 2013-04-09 5:52 ` [wireless-regdb] " Luis R. Rodriguez @ 2013-04-09 6:52 ` Johannes Berg -1 siblings, 0 replies; 20+ messages in thread From: Johannes Berg @ 2013-04-09 6:52 UTC (permalink / raw) To: Luis R. Rodriguez Cc: linville, qca_vkondrat, yunsenw, kandala, wireless-regdb, green, linux-wireless On Mon, 2013-04-08 at 22:52 -0700, Luis R. Rodriguez wrote: > + # IEEE 802.11ad (60gHz), channels 1..3 > + (57240 - 63720 @ 2160), (N/A, 0) Also -- GHz, not gHz :) johannes ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [wireless-regdb] [PATCH 3/3] wireless-regdb: add VHT channels 1..3 to world regdom @ 2013-04-09 6:52 ` Johannes Berg 0 siblings, 0 replies; 20+ messages in thread From: Johannes Berg @ 2013-04-09 6:52 UTC (permalink / raw) To: Luis R. Rodriguez Cc: wireless-regdb, kandala, linux-wireless, linville, qca_vkondrat, green, yunsenw On Mon, 2013-04-08 at 22:52 -0700, Luis R. Rodriguez wrote: > + # IEEE 802.11ad (60gHz), channels 1..3 > + (57240 - 63720 @ 2160), (N/A, 0) Also -- GHz, not gHz :) johannes _______________________________________________ wireless-regdb mailing list wireless-regdb@lists.infradead.org http://lists.infradead.org/mailman/listinfo/wireless-regdb ^ permalink raw reply [flat|nested] 20+ messages in thread
end of thread, other threads:[~2013-04-10 7:22 UTC | newest] Thread overview: 20+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-04-09 5:52 [PATCH 0/3] wireless-regdb: a few regulatory updates Luis R. Rodriguez 2013-04-09 5:52 ` [wireless-regdb] " Luis R. Rodriguez 2013-04-09 5:52 ` [PATCH 1/3] wireless-regdb: enable HT40 in RU - Russian Federation Luis R. Rodriguez 2013-04-09 5:52 ` [wireless-regdb] " Luis R. Rodriguez 2013-04-09 5:52 ` [PATCH 2/3] wireless-regdb: enable VHT80 when world roaming Luis R. Rodriguez 2013-04-09 5:52 ` [wireless-regdb] " Luis R. Rodriguez 2013-04-09 6:51 ` Johannes Berg 2013-04-09 6:51 ` Johannes Berg 2013-04-09 8:26 ` Luis R. Rodriguez 2013-04-09 8:26 ` Luis R. Rodriguez 2013-04-09 13:54 ` Green, Michael 2013-04-09 13:54 ` Green, Michael 2013-04-10 7:22 ` Luis R. Rodriguez 2013-04-10 7:22 ` Luis R. Rodriguez 2013-04-09 5:52 ` [PATCH 3/3] wireless-regdb: add VHT channels 1..3 to world regdom Luis R. Rodriguez 2013-04-09 5:52 ` [wireless-regdb] " Luis R. Rodriguez 2013-04-09 6:52 ` Johannes Berg 2013-04-09 6:52 ` [wireless-regdb] " Johannes Berg 2013-04-09 6:52 ` Johannes Berg 2013-04-09 6:52 ` [wireless-regdb] " Johannes Berg
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.