From: Dolev Raviv <draviv@codeaurora.org>
To: linux-scsi@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org,
Dolev Raviv <draviv@codeaurora.org>,
Sujit Reddy Thumma <sthumma@codeaurora.org>,
"moderated list:OPEN FIRMWARE AND..."
<devicetree-discuss@lists.ozlabs.org>,
"open list:DOCUMENTATION" <linux-doc@vger.kernel.org>,
open list <linux-kernel@vger.kernel.org>
Subject: [PATCH V1 1/8] Documentation: devicetree: Add DT bindings for UFS host controller
Date: Sun, 12 May 2013 17:23:53 +0300 [thread overview]
Message-ID: <1368368640-10167-2-git-send-email-draviv@codeaurora.org> (raw)
In-Reply-To: <1368368640-10167-1-git-send-email-draviv@codeaurora.org>
Compatible list is used in commit 03b1781 but is not documented.
Add necessary device tree bindings to describe on-chip UFS host
controllers.
Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
new file mode 100644
index 0000000..20468b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
@@ -0,0 +1,16 @@
+* Universal Flash Storage (UFS) Host Controller
+
+UFSHC nodes are defined to describe on-chip UFS host controllers.
+Each UFS controller instance should have its own node.
+
+Required properties:
+- compatible : compatible list, contains "jedec,ufs-1.1"
+- interrupts : <interrupt mapping for UFS host controller IRQ>
+- reg : <registers mapping>
+
+Example:
+ ufshc@0xfc598000 {
+ compatible = "jedec,ufs-1.1";
+ reg = <0xfc598000 0x800>;
+ interrupts = <0 28 0>;
+ };
--
1.7.6
--
QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
WARNING: multiple messages have this Message-ID (diff)
From: Dolev Raviv <draviv@codeaurora.org>
To: linux-scsi@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org,
Dolev Raviv <draviv@codeaurora.org>,
Sujit Reddy Thumma <sthumma@codeaurora.org>,
devicetree-discuss@lists.ozlabs.org (moderated list:OPEN
FIRMWARE AND...),
linux-doc@vger.kernel.org (open list:DOCUMENTATION),
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH V1 1/8] Documentation: devicetree: Add DT bindings for UFS host controller
Date: Sun, 12 May 2013 17:23:53 +0300 [thread overview]
Message-ID: <1368368640-10167-2-git-send-email-draviv@codeaurora.org> (raw)
In-Reply-To: <1368368640-10167-1-git-send-email-draviv@codeaurora.org>
Compatible list is used in commit 03b1781 but is not documented.
Add necessary device tree bindings to describe on-chip UFS host
controllers.
Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
new file mode 100644
index 0000000..20468b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
@@ -0,0 +1,16 @@
+* Universal Flash Storage (UFS) Host Controller
+
+UFSHC nodes are defined to describe on-chip UFS host controllers.
+Each UFS controller instance should have its own node.
+
+Required properties:
+- compatible : compatible list, contains "jedec,ufs-1.1"
+- interrupts : <interrupt mapping for UFS host controller IRQ>
+- reg : <registers mapping>
+
+Example:
+ ufshc@0xfc598000 {
+ compatible = "jedec,ufs-1.1";
+ reg = <0xfc598000 0x800>;
+ interrupts = <0 28 0>;
+ };
--
1.7.6
--
QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2013-05-12 14:24 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-12 14:23 [PATCH V1 0/8] ufs patch siries Dolev Raviv
2013-05-12 14:23 ` Dolev Raviv [this message]
2013-05-12 14:23 ` [PATCH V1 1/8] Documentation: devicetree: Add DT bindings for UFS host controller Dolev Raviv
2013-05-12 14:23 ` [PATCH V1 2/8] scsi: ufs: Fix the response UPIU length setting Dolev Raviv
2013-05-12 14:23 ` Dolev Raviv
2013-05-12 14:23 ` [PATCH V1 3/8] scsi: ufs: wrap the i/o access operations Dolev Raviv
2013-05-12 14:23 ` Dolev Raviv
2013-05-13 4:07 ` Seungwon Jeon
2013-05-13 6:29 ` Dolev Raviv
2013-05-12 14:23 ` [PATCH V1 4/8] scsi: ufs: amend interrupt configuration Dolev Raviv
2013-05-12 14:23 ` Dolev Raviv
2013-05-12 14:23 ` [PATCH V1 5/8] scsi: ufs: fix interrupt status clears Dolev Raviv
2013-05-12 14:23 ` Dolev Raviv
2013-05-12 14:23 ` [PATCH V1 6/8] scsi: ufs: rework link start-up process Dolev Raviv
2013-05-12 14:23 ` Dolev Raviv
2013-05-12 14:23 ` [PATCH V1 7/8] scsi: ufs: Add support for sending NOP OUT UPIU Dolev Raviv
2013-05-12 14:23 ` Dolev Raviv
2013-05-12 14:24 ` [PATCH V1 8/8] scsi: ufs: Set fDeviceInit flag to initiate device initialization Dolev Raviv
2013-05-12 14:24 ` Dolev Raviv
-- strict thread matches above, loose matches on Subject: below --
2013-05-13 10:02 [PATCH V1 0/8] ufs patch siries Dolev Raviv
2013-05-13 10:02 ` [PATCH V1 1/8] Documentation: devicetree: Add DT bindings for UFS host controller Dolev Raviv
2013-05-13 10:02 ` Dolev Raviv
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1368368640-10167-2-git-send-email-draviv@codeaurora.org \
--to=draviv@codeaurora.org \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=sthumma@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.