All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCHv9 0/3] Add support for velocity network driver on platform devices
@ 2013-05-18 19:39 Tony Prisk
  2013-05-18 19:39 ` [PATCHv9 1/3] net: velocity: Rename vptr->dev to vptr->netdev Tony Prisk
                   ` (3 more replies)
  0 siblings, 4 replies; 5+ messages in thread
From: Tony Prisk @ 2013-05-18 19:39 UTC (permalink / raw)
  To: davem; +Cc: netdev, linux-kernel, romieu, Tony Prisk

v9 changes:
Code tidyup as requested by Francois Romieu.

v8 changes:
Remove velocity_choose_state from via-velocity.h: unused function.

v7 changes:
Forgot to merge a patch to fix an error with the pm ops changes. Apologies Dave.

v6 changes:
Remove more bus specific code from velocity_probe()
Make velocity_(suspend/resume) accept a struct device *
Simplify PM code to use velocity_(suspend/resume) - remove the individual
pci and platform functions.
Add a struct pci_dev variable to velocity_get_pci_info() to reduce churn

v5 changes:
Remove velocity_info union. Change velocity_info->pdev back to struct pci_dev.
Remove more 'if (pci)' sections.
Remove 'void *pdev' function parameters.
Pass correct variable to velocity_choose_state()

v4 changes:
Code tidyup as requested by Francois Romieu
Removed '#ifdef PCI' around PCI code. Compile tested on (!)PCI and (!)PM.

v3 changes:
Rebased against net-next.
Fix errors in pm code.

v2 changes:
Drop patch #1 as requested by David Miller.
Correct the PHYID_ICPLUS_IP101A MII bits - should be ON, rather than OFF.
Read the platform rev_id from the correct register [regs->rev_id]. It's possible
this would work for the PCI version as well and would remove the need for the
'if (pci)' test to set vptr->rev_id.

v1:
The first three patches are general tidyup.

[DROPPED] Patch ## just alphabetizes the #includes to make it easier to read.

Patch #1 replaces vptr->dev with vptr->netdev, in preparation of adding a
struct device *dev in Patch #2

Patch #2 replaces the pci dma functions with the generic versions.

I have build tested these patches but don't have a PCI velocity to run-test it.
I can't see that they should introduce any problems as it is all renames and
function swapping.

Patch #3 adds support for the velocity driver on devicetree platform devices.
Binding document included. This patch is compile-tested for PCI, and boot
tested on a VIA APC8750.

I think it would be pertinent to get some tested-by's for PCI users.

Regards
Tony Prisk

Tony Prisk (3):
  net: velocity: Rename vptr->dev to vptr->netdev
  net: velocity: Convert to generic dma functions
  net: velocity: Add platform device support to VIA velocity driver

 .../devicetree/bindings/net/via-velocity.txt       |   20 +
 drivers/net/ethernet/via/Kconfig                   |    3 +-
 drivers/net/ethernet/via/via-velocity.c            |  507 +++++++++++++-------
 drivers/net/ethernet/via/via-velocity.h            |    8 +-
 4 files changed, 357 insertions(+), 181 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/via-velocity.txt

-- 
1.7.9.5


^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2013-05-20 20:41 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-05-18 19:39 [PATCHv9 0/3] Add support for velocity network driver on platform devices Tony Prisk
2013-05-18 19:39 ` [PATCHv9 1/3] net: velocity: Rename vptr->dev to vptr->netdev Tony Prisk
2013-05-18 19:39 ` [PATCHv9 2/3] net: velocity: Convert to generic dma functions Tony Prisk
2013-05-18 19:39 ` [PATCHv9 3/3] net: velocity: Add platform device support to VIA velocity driver Tony Prisk
2013-05-20 20:41 ` [PATCHv9 0/3] Add support for velocity network driver on platform devices David Miller

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.