From: Stephen Boyd <sboyd@codeaurora.org>
To: David Brown <davidb@codeaurora.org>,
Daniel Walker <dwalker@fifo99.com>,
Bryan Huntsman <bryanh@codeaurora.org>
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-usb@vger.kernel.org,
Felipe Balbi <balbi@ti.com>
Subject: [PATCH 03/12] usb: otg: msm: Convert to clk_prepare/unprepare
Date: Tue, 4 Jun 2013 12:25:29 -0700 [thread overview]
Message-ID: <1370373938-32417-4-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1370373938-32417-1-git-send-email-sboyd@codeaurora.org>
Add calls to clk_prepare and unprepare so that MSM can migrate to
the common clock framework.
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/usb/phy/phy-msm-usb.c | 38 +++++++++++++++++++-------------------
1 file changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index 749fbf4..d08f334 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -514,13 +514,13 @@ static int msm_otg_suspend(struct msm_otg *motg)
motg->pdata->otg_control == OTG_PMIC_CONTROL)
writel(readl(USB_PHY_CTRL) | PHY_RETEN, USB_PHY_CTRL);
- clk_disable(motg->pclk);
- clk_disable(motg->clk);
+ clk_disable_unprepare(motg->pclk);
+ clk_disable_unprepare(motg->clk);
if (motg->core_clk)
- clk_disable(motg->core_clk);
+ clk_disable_unprepare(motg->core_clk);
if (!IS_ERR(motg->pclk_src))
- clk_disable(motg->pclk_src);
+ clk_disable_unprepare(motg->pclk_src);
if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
motg->pdata->otg_control == OTG_PMIC_CONTROL) {
@@ -552,12 +552,12 @@ static int msm_otg_resume(struct msm_otg *motg)
return 0;
if (!IS_ERR(motg->pclk_src))
- clk_enable(motg->pclk_src);
+ clk_prepare_enable(motg->pclk_src);
- clk_enable(motg->pclk);
- clk_enable(motg->clk);
+ clk_prepare_enable(motg->pclk);
+ clk_prepare_enable(motg->clk);
if (motg->core_clk)
- clk_enable(motg->core_clk);
+ clk_prepare_enable(motg->core_clk);
if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
motg->pdata->otg_control == OTG_PMIC_CONTROL) {
@@ -1468,7 +1468,7 @@ static int __init msm_otg_probe(struct platform_device *pdev)
if (IS_ERR(motg->pclk_src))
goto put_clk;
clk_set_rate(motg->pclk_src, INT_MAX);
- clk_enable(motg->pclk_src);
+ clk_prepare_enable(motg->pclk_src);
} else
motg->pclk_src = ERR_PTR(-ENOENT);
@@ -1511,8 +1511,8 @@ static int __init msm_otg_probe(struct platform_device *pdev)
goto free_regs;
}
- clk_enable(motg->clk);
- clk_enable(motg->pclk);
+ clk_prepare_enable(motg->clk);
+ clk_prepare_enable(motg->pclk);
ret = msm_hsusb_init_vddcx(motg, 1);
if (ret) {
@@ -1532,7 +1532,7 @@ static int __init msm_otg_probe(struct platform_device *pdev)
}
if (motg->core_clk)
- clk_enable(motg->core_clk);
+ clk_prepare_enable(motg->core_clk);
writel(0, USB_USBINTR);
writel(0, USB_OTGSC);
@@ -1579,8 +1579,8 @@ static int __init msm_otg_probe(struct platform_device *pdev)
free_irq:
free_irq(motg->irq, motg);
disable_clks:
- clk_disable(motg->pclk);
- clk_disable(motg->clk);
+ clk_disable_unprepare(motg->pclk);
+ clk_disable_unprepare(motg->clk);
ldo_exit:
msm_hsusb_ldo_init(motg, 0);
vddcx_exit:
@@ -1593,7 +1593,7 @@ put_core_clk:
clk_put(motg->pclk);
put_pclk_src:
if (!IS_ERR(motg->pclk_src)) {
- clk_disable(motg->pclk_src);
+ clk_disable_unprepare(motg->pclk_src);
clk_put(motg->pclk_src);
}
put_clk:
@@ -1643,12 +1643,12 @@ static int msm_otg_remove(struct platform_device *pdev)
if (cnt >= PHY_SUSPEND_TIMEOUT_USEC)
dev_err(phy->dev, "Unable to suspend PHY\n");
- clk_disable(motg->pclk);
- clk_disable(motg->clk);
+ clk_disable_unprepare(motg->pclk);
+ clk_disable_unprepare(motg->clk);
if (motg->core_clk)
- clk_disable(motg->core_clk);
+ clk_disable_unprepare(motg->core_clk);
if (!IS_ERR(motg->pclk_src)) {
- clk_disable(motg->pclk_src);
+ clk_disable_unprepare(motg->pclk_src);
clk_put(motg->pclk_src);
}
msm_hsusb_ldo_init(motg, 0);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
WARNING: multiple messages have this Message-ID (diff)
From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 03/12] usb: otg: msm: Convert to clk_prepare/unprepare
Date: Tue, 4 Jun 2013 12:25:29 -0700 [thread overview]
Message-ID: <1370373938-32417-4-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1370373938-32417-1-git-send-email-sboyd@codeaurora.org>
Add calls to clk_prepare and unprepare so that MSM can migrate to
the common clock framework.
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/usb/phy/phy-msm-usb.c | 38 +++++++++++++++++++-------------------
1 file changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index 749fbf4..d08f334 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -514,13 +514,13 @@ static int msm_otg_suspend(struct msm_otg *motg)
motg->pdata->otg_control == OTG_PMIC_CONTROL)
writel(readl(USB_PHY_CTRL) | PHY_RETEN, USB_PHY_CTRL);
- clk_disable(motg->pclk);
- clk_disable(motg->clk);
+ clk_disable_unprepare(motg->pclk);
+ clk_disable_unprepare(motg->clk);
if (motg->core_clk)
- clk_disable(motg->core_clk);
+ clk_disable_unprepare(motg->core_clk);
if (!IS_ERR(motg->pclk_src))
- clk_disable(motg->pclk_src);
+ clk_disable_unprepare(motg->pclk_src);
if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
motg->pdata->otg_control == OTG_PMIC_CONTROL) {
@@ -552,12 +552,12 @@ static int msm_otg_resume(struct msm_otg *motg)
return 0;
if (!IS_ERR(motg->pclk_src))
- clk_enable(motg->pclk_src);
+ clk_prepare_enable(motg->pclk_src);
- clk_enable(motg->pclk);
- clk_enable(motg->clk);
+ clk_prepare_enable(motg->pclk);
+ clk_prepare_enable(motg->clk);
if (motg->core_clk)
- clk_enable(motg->core_clk);
+ clk_prepare_enable(motg->core_clk);
if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
motg->pdata->otg_control == OTG_PMIC_CONTROL) {
@@ -1468,7 +1468,7 @@ static int __init msm_otg_probe(struct platform_device *pdev)
if (IS_ERR(motg->pclk_src))
goto put_clk;
clk_set_rate(motg->pclk_src, INT_MAX);
- clk_enable(motg->pclk_src);
+ clk_prepare_enable(motg->pclk_src);
} else
motg->pclk_src = ERR_PTR(-ENOENT);
@@ -1511,8 +1511,8 @@ static int __init msm_otg_probe(struct platform_device *pdev)
goto free_regs;
}
- clk_enable(motg->clk);
- clk_enable(motg->pclk);
+ clk_prepare_enable(motg->clk);
+ clk_prepare_enable(motg->pclk);
ret = msm_hsusb_init_vddcx(motg, 1);
if (ret) {
@@ -1532,7 +1532,7 @@ static int __init msm_otg_probe(struct platform_device *pdev)
}
if (motg->core_clk)
- clk_enable(motg->core_clk);
+ clk_prepare_enable(motg->core_clk);
writel(0, USB_USBINTR);
writel(0, USB_OTGSC);
@@ -1579,8 +1579,8 @@ static int __init msm_otg_probe(struct platform_device *pdev)
free_irq:
free_irq(motg->irq, motg);
disable_clks:
- clk_disable(motg->pclk);
- clk_disable(motg->clk);
+ clk_disable_unprepare(motg->pclk);
+ clk_disable_unprepare(motg->clk);
ldo_exit:
msm_hsusb_ldo_init(motg, 0);
vddcx_exit:
@@ -1593,7 +1593,7 @@ put_core_clk:
clk_put(motg->pclk);
put_pclk_src:
if (!IS_ERR(motg->pclk_src)) {
- clk_disable(motg->pclk_src);
+ clk_disable_unprepare(motg->pclk_src);
clk_put(motg->pclk_src);
}
put_clk:
@@ -1643,12 +1643,12 @@ static int msm_otg_remove(struct platform_device *pdev)
if (cnt >= PHY_SUSPEND_TIMEOUT_USEC)
dev_err(phy->dev, "Unable to suspend PHY\n");
- clk_disable(motg->pclk);
- clk_disable(motg->clk);
+ clk_disable_unprepare(motg->pclk);
+ clk_disable_unprepare(motg->clk);
if (motg->core_clk)
- clk_disable(motg->core_clk);
+ clk_disable_unprepare(motg->core_clk);
if (!IS_ERR(motg->pclk_src)) {
- clk_disable(motg->pclk_src);
+ clk_disable_unprepare(motg->pclk_src);
clk_put(motg->pclk_src);
}
msm_hsusb_ldo_init(motg, 0);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
next prev parent reply other threads:[~2013-06-04 19:25 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-04 19:25 [PATCH 00/12] Convert MSM to common clock framework Stephen Boyd
2013-06-04 19:25 ` Stephen Boyd
2013-06-04 19:25 ` [PATCH 01/12] msm_serial: Convert to clk_prepare/unprepare Stephen Boyd
2013-06-04 19:25 ` Stephen Boyd
2013-06-04 19:25 ` [PATCH 02/12] msm_serial: Use devm_clk_get() and properly return errors Stephen Boyd
2013-06-04 19:25 ` Stephen Boyd
2013-06-04 19:25 ` Stephen Boyd [this message]
2013-06-04 19:25 ` [PATCH 03/12] usb: otg: msm: Convert to clk_prepare/unprepare Stephen Boyd
2013-06-04 20:21 ` Felipe Balbi
2013-06-04 20:21 ` Felipe Balbi
2013-06-04 20:21 ` Felipe Balbi
2013-06-04 19:25 ` [PATCH 04/12] msm_sdcc: " Stephen Boyd
2013-06-04 19:25 ` Stephen Boyd
2013-06-04 19:25 ` Stephen Boyd
2013-06-04 19:25 ` [PATCH 05/12] msm: iommu: " Stephen Boyd
2013-06-04 19:25 ` Stephen Boyd
2013-06-04 19:25 ` [PATCH 06/12] msm: iommu: Use clk_set_rate() instead of clk_set_min_rate() Stephen Boyd
2013-06-04 19:25 ` Stephen Boyd
2013-06-04 19:25 ` [PATCH 07/12] ARM: msm: Remove custom clk_set_flags() API Stephen Boyd
2013-06-04 19:25 ` Stephen Boyd
2013-06-04 19:25 ` [PATCH 08/12] ARM: msm: Remove custom clk_set_{max,min}_rate() API Stephen Boyd
2013-06-04 19:25 ` Stephen Boyd
2013-06-04 19:25 ` [PATCH 09/12] ARM: msm: Remove clock-7x30.h include file Stephen Boyd
2013-06-04 19:25 ` Stephen Boyd
2013-06-04 19:25 ` [PATCH 10/12] ARM: msm: Prepare clk_get() users in mach-msm for clock-pcom driver Stephen Boyd
2013-06-04 19:25 ` Stephen Boyd
2013-06-04 19:25 ` [PATCH 11/12] ARM: msm: Make proc_comm clock control into a platform driver Stephen Boyd
2013-06-04 19:25 ` Stephen Boyd
2013-06-04 19:25 ` [PATCH 12/12] ARM: msm: Migrate to common clock framework Stephen Boyd
2013-06-04 19:25 ` Stephen Boyd
2013-06-11 22:28 ` Mike Turquette
2013-06-11 22:28 ` Mike Turquette
2013-06-12 16:54 ` Stephen Boyd
2013-06-12 16:54 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1370373938-32417-4-git-send-email-sboyd@codeaurora.org \
--to=sboyd@codeaurora.org \
--cc=balbi@ti.com \
--cc=bryanh@codeaurora.org \
--cc=davidb@codeaurora.org \
--cc=dwalker@fifo99.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.