From: Tiejun Chen <tiejun.chen@windriver.com>
To: <benh@kernel.crashing.org>
Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: [v5][PATCH 1/6] powerpc/book3e: load critical/machine/debug exception stack
Date: Thu, 20 Jun 2013 18:28:25 +0800 [thread overview]
Message-ID: <1371724110-8250-2-git-send-email-tiejun.chen@windriver.com> (raw)
In-Reply-To: <1371724110-8250-1-git-send-email-tiejun.chen@windriver.com>
We always alloc critical/machine/debug check exceptions. This is
different from the normal exception. So we should load these exception
stack properly like we did for booke.
Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
---
arch/powerpc/kernel/exceptions-64e.S | 49 +++++++++++++++++++++++++++++++---
1 file changed, 46 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index 4b23119..4d8e57f 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -36,6 +36,37 @@
*/
#define SPECIAL_EXC_FRAME_SIZE INT_FRAME_SIZE
+/* only on book3e */
+#define DBG_STACK_BASE dbgirq_ctx
+#define MC_STACK_BASE mcheckirq_ctx
+#define CRIT_STACK_BASE critirq_ctx
+
+#ifdef CONFIG_RELOCATABLE
+#define LOAD_STACK_BASE(reg, level) \
+ tovirt(r2,r2); \
+ LOAD_REG_ADDR(reg, level##_STACK_BASE);
+#else
+#define LOAD_STACK_BASE(reg, level) \
+ LOAD_REG_IMMEDIATE(reg, level##_STACK_BASE);
+#endif
+
+#ifdef CONFIG_SMP
+#define BOOK3E_LOAD_EXC_LEVEL_STACK(level) \
+ mfspr r14,SPRN_PIR; \
+ slwi r14,r14,3; \
+ LOAD_STACK_BASE(r10, level); \
+ add r10,r10,r14; \
+ ld r10,0(r10); \
+ addi r10,r10,THREAD_SIZE; \
+ std r10,PACA_##level##_STACK(r13);
+#else
+#define BOOK3E_LOAD_EXC_LEVEL_STACK(level) \
+ LOAD_STACK_BASE(r10, level); \
+ ld r10,0(r10); \
+ addi r10,r10,THREAD_SIZE; \
+ std r10,PACA_##level##_STACK(r13);
+#endif
+
/* Exception prolog code for all exceptions */
#define EXCEPTION_PROLOG(n, intnum, type, addition) \
mtspr SPRN_SPRG_##type##_SCRATCH,r13; /* get spare registers */ \
@@ -68,20 +99,32 @@
#define SPRN_GDBELL_SRR1 SPRN_GSRR1
#define CRIT_SET_KSTACK \
+ andi. r10,r11,MSR_PR; \
+ bne 1f; \
+ BOOK3E_LOAD_EXC_LEVEL_STACK(CRIT); \
ld r1,PACA_CRIT_STACK(r13); \
- subi r1,r1,SPECIAL_EXC_FRAME_SIZE;
+ subi r1,r1,SPECIAL_EXC_FRAME_SIZE; \
+1:
#define SPRN_CRIT_SRR0 SPRN_CSRR0
#define SPRN_CRIT_SRR1 SPRN_CSRR1
#define DBG_SET_KSTACK \
+ andi. r10,r11,MSR_PR; \
+ bne 1f; \
+ BOOK3E_LOAD_EXC_LEVEL_STACK(DBG); \
ld r1,PACA_DBG_STACK(r13); \
- subi r1,r1,SPECIAL_EXC_FRAME_SIZE;
+ subi r1,r1,SPECIAL_EXC_FRAME_SIZE; \
+1:
#define SPRN_DBG_SRR0 SPRN_DSRR0
#define SPRN_DBG_SRR1 SPRN_DSRR1
#define MC_SET_KSTACK \
+ andi. r10,r11,MSR_PR; \
+ bne 1f; \
+ BOOK3E_LOAD_EXC_LEVEL_STACK(MC); \
ld r1,PACA_MC_STACK(r13); \
- subi r1,r1,SPECIAL_EXC_FRAME_SIZE;
+ subi r1,r1,SPECIAL_EXC_FRAME_SIZE; \
+1:
#define SPRN_MC_SRR0 SPRN_MCSRR0
#define SPRN_MC_SRR1 SPRN_MCSRR1
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: Tiejun Chen <tiejun.chen@windriver.com>
To: <benh@kernel.crashing.org>
Cc: <linux-kernel@vger.kernel.org>, <linuxppc-dev@lists.ozlabs.org>
Subject: [v5][PATCH 1/6] powerpc/book3e: load critical/machine/debug exception stack
Date: Thu, 20 Jun 2013 18:28:25 +0800 [thread overview]
Message-ID: <1371724110-8250-2-git-send-email-tiejun.chen@windriver.com> (raw)
In-Reply-To: <1371724110-8250-1-git-send-email-tiejun.chen@windriver.com>
We always alloc critical/machine/debug check exceptions. This is
different from the normal exception. So we should load these exception
stack properly like we did for booke.
Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
---
arch/powerpc/kernel/exceptions-64e.S | 49 +++++++++++++++++++++++++++++++---
1 file changed, 46 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index 4b23119..4d8e57f 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -36,6 +36,37 @@
*/
#define SPECIAL_EXC_FRAME_SIZE INT_FRAME_SIZE
+/* only on book3e */
+#define DBG_STACK_BASE dbgirq_ctx
+#define MC_STACK_BASE mcheckirq_ctx
+#define CRIT_STACK_BASE critirq_ctx
+
+#ifdef CONFIG_RELOCATABLE
+#define LOAD_STACK_BASE(reg, level) \
+ tovirt(r2,r2); \
+ LOAD_REG_ADDR(reg, level##_STACK_BASE);
+#else
+#define LOAD_STACK_BASE(reg, level) \
+ LOAD_REG_IMMEDIATE(reg, level##_STACK_BASE);
+#endif
+
+#ifdef CONFIG_SMP
+#define BOOK3E_LOAD_EXC_LEVEL_STACK(level) \
+ mfspr r14,SPRN_PIR; \
+ slwi r14,r14,3; \
+ LOAD_STACK_BASE(r10, level); \
+ add r10,r10,r14; \
+ ld r10,0(r10); \
+ addi r10,r10,THREAD_SIZE; \
+ std r10,PACA_##level##_STACK(r13);
+#else
+#define BOOK3E_LOAD_EXC_LEVEL_STACK(level) \
+ LOAD_STACK_BASE(r10, level); \
+ ld r10,0(r10); \
+ addi r10,r10,THREAD_SIZE; \
+ std r10,PACA_##level##_STACK(r13);
+#endif
+
/* Exception prolog code for all exceptions */
#define EXCEPTION_PROLOG(n, intnum, type, addition) \
mtspr SPRN_SPRG_##type##_SCRATCH,r13; /* get spare registers */ \
@@ -68,20 +99,32 @@
#define SPRN_GDBELL_SRR1 SPRN_GSRR1
#define CRIT_SET_KSTACK \
+ andi. r10,r11,MSR_PR; \
+ bne 1f; \
+ BOOK3E_LOAD_EXC_LEVEL_STACK(CRIT); \
ld r1,PACA_CRIT_STACK(r13); \
- subi r1,r1,SPECIAL_EXC_FRAME_SIZE;
+ subi r1,r1,SPECIAL_EXC_FRAME_SIZE; \
+1:
#define SPRN_CRIT_SRR0 SPRN_CSRR0
#define SPRN_CRIT_SRR1 SPRN_CSRR1
#define DBG_SET_KSTACK \
+ andi. r10,r11,MSR_PR; \
+ bne 1f; \
+ BOOK3E_LOAD_EXC_LEVEL_STACK(DBG); \
ld r1,PACA_DBG_STACK(r13); \
- subi r1,r1,SPECIAL_EXC_FRAME_SIZE;
+ subi r1,r1,SPECIAL_EXC_FRAME_SIZE; \
+1:
#define SPRN_DBG_SRR0 SPRN_DSRR0
#define SPRN_DBG_SRR1 SPRN_DSRR1
#define MC_SET_KSTACK \
+ andi. r10,r11,MSR_PR; \
+ bne 1f; \
+ BOOK3E_LOAD_EXC_LEVEL_STACK(MC); \
ld r1,PACA_MC_STACK(r13); \
- subi r1,r1,SPECIAL_EXC_FRAME_SIZE;
+ subi r1,r1,SPECIAL_EXC_FRAME_SIZE; \
+1:
#define SPRN_MC_SRR0 SPRN_MCSRR0
#define SPRN_MC_SRR1 SPRN_MCSRR1
--
1.7.9.5
next prev parent reply other threads:[~2013-06-20 10:28 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-20 10:28 [v5][PATCH 0/6] powerpc/book3e: powerpc/book3e: make kgdb to work well Tiejun Chen
2013-06-20 10:28 ` Tiejun Chen
2013-06-20 10:28 ` Tiejun Chen [this message]
2013-06-20 10:28 ` [v5][PATCH 1/6] powerpc/book3e: load critical/machine/debug exception stack Tiejun Chen
2013-10-18 22:37 ` Scott Wood
2013-10-18 22:37 ` Scott Wood
2013-10-23 9:26 ` "“tiejun.chen”"
2013-10-23 9:26 ` "“tiejun.chen”"
2013-10-18 23:55 ` Scott Wood
2013-10-18 23:55 ` Scott Wood
2013-10-23 9:28 ` "“tiejun.chen”"
2013-10-23 9:28 ` "“tiejun.chen”"
2013-06-20 10:28 ` [v5][PATCH 2/6] powerpc/book3e: store critical/machine/debug exception thread info Tiejun Chen
2013-06-20 10:28 ` Tiejun Chen
2013-10-18 22:43 ` Scott Wood
2013-10-18 22:43 ` Scott Wood
2013-10-23 9:27 ` "“tiejun.chen”"
2013-10-23 9:27 ` "“tiejun.chen”"
2013-06-20 10:28 ` [v5][PATCH 3/6] book3e/kgdb: update thread's dbcr0 Tiejun Chen
2013-06-20 10:28 ` Tiejun Chen
2013-10-18 22:57 ` Scott Wood
2013-10-18 22:57 ` Scott Wood
2013-10-23 9:27 ` "“tiejun.chen”"
2013-10-23 9:27 ` "“tiejun.chen”"
2013-06-20 10:28 ` [v5][PATCH 4/6] powerpc/book3e: support kgdb for kernel space Tiejun Chen
2013-06-20 10:28 ` Tiejun Chen
2013-10-18 22:58 ` Scott Wood
2013-10-18 22:58 ` Scott Wood
2013-10-23 9:27 ` "“tiejun.chen”"
2013-10-23 9:27 ` "“tiejun.chen”"
2013-06-20 10:28 ` [v5][PATCH 5/6] powerpc/kgdb: use DEFINE_PER_CPU to allocate kgdb's thread_info Tiejun Chen
2013-06-20 10:28 ` Tiejun Chen
2013-06-20 10:28 ` [v5][PATCH 6/6] book3e/kgdb: Fix a single stgep case of lazy IRQ Tiejun Chen
2013-06-20 10:28 ` Tiejun Chen
2013-10-18 23:32 ` Scott Wood
2013-10-18 23:32 ` Scott Wood
2013-10-23 9:28 ` "“tiejun.chen”"
2013-10-23 9:28 ` "“tiejun.chen”"
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1371724110-8250-2-git-send-email-tiejun.chen@windriver.com \
--to=tiejun.chen@windriver.com \
--cc=benh@kernel.crashing.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.