From: jonas.jensen@gmail.com (Jonas Jensen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3] ARM: irqchip: add support for MOXA ART SoCs
Date: Thu, 27 Jun 2013 15:29:33 +0200 [thread overview]
Message-ID: <1372339773-4974-1-git-send-email-jonas.jensen@gmail.com> (raw)
In-Reply-To: <1371718732-12680-1-git-send-email-jonas.jensen@gmail.com>
This patch adds an irqchip driver for the main interrupt controller found
on MOXA ART SoCs.
Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com>
---
Notes:
Applies to next-20130619
Changes since v2:
1. bail if irq_alloc_domain_generic_chips fails
2. remove separate function "moxart_alloc_gc", move all code to main init
3. if of_iomap fails, instead of panic, print error and return -EINVAL
4. use of_property_read_u32 instead of be32_to_cpup(of_get_property(..))
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-moxart.c | 110 +++++++++++++++++++++++++++++++++++++++++++
2 files changed, 111 insertions(+)
create mode 100644 drivers/irqchip/irq-moxart.c
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index cda4cb5..956d129 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -16,3 +16,4 @@ obj-$(CONFIG_RENESAS_INTC_IRQPIN) += irq-renesas-intc-irqpin.o
obj-$(CONFIG_RENESAS_IRQC) += irq-renesas-irqc.o
obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o
obj-$(CONFIG_ARCH_VT8500) += irq-vt8500.o
+obj-$(CONFIG_ARCH_MOXART) += irq-moxart.o
diff --git a/drivers/irqchip/irq-moxart.c b/drivers/irqchip/irq-moxart.c
new file mode 100644
index 0000000..0815108
--- /dev/null
+++ b/drivers/irqchip/irq-moxart.c
@@ -0,0 +1,110 @@
+/*
+ * MOXA ART SoCs IRQ chip driver.
+ *
+ * Copyright (C) 2013 Jonas Jensen
+ *
+ * Jonas Jensen <jonas.jensen@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/irqdomain.h>
+
+#include <asm/exception.h>
+
+#include "irqchip.h"
+
+#define IRQ_SOURCE_REG 0
+#define IRQ_MASK_REG 0x04
+#define IRQ_CLEAR_REG 0x08
+#define IRQ_MODE_REG 0x0c
+#define IRQ_LEVEL_REG 0x10
+#define IRQ_STATUS_REG 0x14
+
+#define FIQ_SOURCE_REG 0x20
+#define FIQ_MASK_REG 0x24
+#define FIQ_CLEAR_REG 0x28
+#define FIQ_MODE_REG 0x2c
+#define FIQ_LEVEL_REG 0x30
+#define FIQ_STATUS_REG 0x34
+
+static void __iomem *moxart_irq_base;
+static struct irq_domain *moxart_irq_domain;
+static unsigned int interrupt_mask;
+
+asmlinkage void __exception_irq_entry moxart_handle_irq(struct pt_regs *regs)
+{
+ u32 irqstat;
+ int hwirq;
+
+ irqstat = readl(moxart_irq_base + IRQ_STATUS_REG);
+
+ while (irqstat) {
+ hwirq = ffs(irqstat) - 1;
+ handle_IRQ(irq_find_mapping(moxart_irq_domain, hwirq), regs);
+ irqstat &= ~(1 << hwirq);
+ }
+}
+
+static int __init moxart_of_intc_init(struct device_node *node,
+ struct device_node *parent)
+{
+ unsigned int clr = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
+ int ret;
+ struct irq_chip_generic *gc;
+
+ ret = of_property_read_u32(node, "interrupt-mask", &interrupt_mask);
+ if (ret)
+ pr_err("%s: can't read interrupt-mask DT property\n",
+ node->full_name);
+ pr_debug("%s: interrupt-mask=%x\n", node->full_name, interrupt_mask);
+
+ moxart_irq_base = of_iomap(node, 0);
+ if (!moxart_irq_base) {
+ pr_err("%s: unable to map INTC CPU registers\n",
+ node->full_name);
+ return -EINVAL;
+ }
+
+ moxart_irq_domain = irq_domain_add_linear(node, 32,
+ &irq_generic_chip_ops, moxart_irq_base);
+
+ ret = irq_alloc_domain_generic_chips(moxart_irq_domain, 32, 1,
+ "MOXARTINTC", handle_edge_irq,
+ clr, 0, IRQ_GC_INIT_MASK_CACHE);
+
+ if (ret) {
+ pr_err("%s: could not allocate generic chip\n", __func__);
+ return -EINVAL;
+ }
+
+ gc = irq_get_domain_generic_chip(moxart_irq_domain, 0);
+
+ gc->reg_base = moxart_irq_base;
+ gc->chip_types[0].regs.mask = IRQ_MASK_REG;
+ gc->chip_types[0].regs.ack = IRQ_CLEAR_REG;
+ gc->chip_types[0].chip.irq_ack = irq_gc_ack_set_bit;
+ gc->chip_types[0].chip.irq_mask = irq_gc_mask_clr_bit;
+ gc->chip_types[0].chip.irq_unmask = irq_gc_mask_set_bit;
+
+ writel(0, moxart_irq_base + IRQ_MASK_REG);
+ writel(0xffffffff, moxart_irq_base + IRQ_CLEAR_REG);
+
+ writel(interrupt_mask, moxart_irq_base + IRQ_MODE_REG);
+ writel(interrupt_mask, moxart_irq_base + IRQ_LEVEL_REG);
+
+ set_handle_irq(moxart_handle_irq);
+
+ pr_info("%s: %s finished\n", node->full_name, __func__);
+
+ return 0;
+}
+IRQCHIP_DECLARE(moxa_moxart_ic, "moxa,moxart-interrupt-controller",
+ moxart_of_intc_init);
--
1.8.2.1
WARNING: multiple messages have this Message-ID (diff)
From: Jonas Jensen <jonas.jensen@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org, arm@kernel.org, tglx@linutronix.de,
grant.likely@secretlab.ca, thomas.petazzoni@free-electrons.com,
arnd@arndb.de, Jonas Jensen <jonas.jensen@gmail.com>
Subject: [PATCH v3] ARM: irqchip: add support for MOXA ART SoCs
Date: Thu, 27 Jun 2013 15:29:33 +0200 [thread overview]
Message-ID: <1372339773-4974-1-git-send-email-jonas.jensen@gmail.com> (raw)
In-Reply-To: <1371718732-12680-1-git-send-email-jonas.jensen@gmail.com>
This patch adds an irqchip driver for the main interrupt controller found
on MOXA ART SoCs.
Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com>
---
Notes:
Applies to next-20130619
Changes since v2:
1. bail if irq_alloc_domain_generic_chips fails
2. remove separate function "moxart_alloc_gc", move all code to main init
3. if of_iomap fails, instead of panic, print error and return -EINVAL
4. use of_property_read_u32 instead of be32_to_cpup(of_get_property(..))
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-moxart.c | 110 +++++++++++++++++++++++++++++++++++++++++++
2 files changed, 111 insertions(+)
create mode 100644 drivers/irqchip/irq-moxart.c
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index cda4cb5..956d129 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -16,3 +16,4 @@ obj-$(CONFIG_RENESAS_INTC_IRQPIN) += irq-renesas-intc-irqpin.o
obj-$(CONFIG_RENESAS_IRQC) += irq-renesas-irqc.o
obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o
obj-$(CONFIG_ARCH_VT8500) += irq-vt8500.o
+obj-$(CONFIG_ARCH_MOXART) += irq-moxart.o
diff --git a/drivers/irqchip/irq-moxart.c b/drivers/irqchip/irq-moxart.c
new file mode 100644
index 0000000..0815108
--- /dev/null
+++ b/drivers/irqchip/irq-moxart.c
@@ -0,0 +1,110 @@
+/*
+ * MOXA ART SoCs IRQ chip driver.
+ *
+ * Copyright (C) 2013 Jonas Jensen
+ *
+ * Jonas Jensen <jonas.jensen@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/irqdomain.h>
+
+#include <asm/exception.h>
+
+#include "irqchip.h"
+
+#define IRQ_SOURCE_REG 0
+#define IRQ_MASK_REG 0x04
+#define IRQ_CLEAR_REG 0x08
+#define IRQ_MODE_REG 0x0c
+#define IRQ_LEVEL_REG 0x10
+#define IRQ_STATUS_REG 0x14
+
+#define FIQ_SOURCE_REG 0x20
+#define FIQ_MASK_REG 0x24
+#define FIQ_CLEAR_REG 0x28
+#define FIQ_MODE_REG 0x2c
+#define FIQ_LEVEL_REG 0x30
+#define FIQ_STATUS_REG 0x34
+
+static void __iomem *moxart_irq_base;
+static struct irq_domain *moxart_irq_domain;
+static unsigned int interrupt_mask;
+
+asmlinkage void __exception_irq_entry moxart_handle_irq(struct pt_regs *regs)
+{
+ u32 irqstat;
+ int hwirq;
+
+ irqstat = readl(moxart_irq_base + IRQ_STATUS_REG);
+
+ while (irqstat) {
+ hwirq = ffs(irqstat) - 1;
+ handle_IRQ(irq_find_mapping(moxart_irq_domain, hwirq), regs);
+ irqstat &= ~(1 << hwirq);
+ }
+}
+
+static int __init moxart_of_intc_init(struct device_node *node,
+ struct device_node *parent)
+{
+ unsigned int clr = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
+ int ret;
+ struct irq_chip_generic *gc;
+
+ ret = of_property_read_u32(node, "interrupt-mask", &interrupt_mask);
+ if (ret)
+ pr_err("%s: can't read interrupt-mask DT property\n",
+ node->full_name);
+ pr_debug("%s: interrupt-mask=%x\n", node->full_name, interrupt_mask);
+
+ moxart_irq_base = of_iomap(node, 0);
+ if (!moxart_irq_base) {
+ pr_err("%s: unable to map INTC CPU registers\n",
+ node->full_name);
+ return -EINVAL;
+ }
+
+ moxart_irq_domain = irq_domain_add_linear(node, 32,
+ &irq_generic_chip_ops, moxart_irq_base);
+
+ ret = irq_alloc_domain_generic_chips(moxart_irq_domain, 32, 1,
+ "MOXARTINTC", handle_edge_irq,
+ clr, 0, IRQ_GC_INIT_MASK_CACHE);
+
+ if (ret) {
+ pr_err("%s: could not allocate generic chip\n", __func__);
+ return -EINVAL;
+ }
+
+ gc = irq_get_domain_generic_chip(moxart_irq_domain, 0);
+
+ gc->reg_base = moxart_irq_base;
+ gc->chip_types[0].regs.mask = IRQ_MASK_REG;
+ gc->chip_types[0].regs.ack = IRQ_CLEAR_REG;
+ gc->chip_types[0].chip.irq_ack = irq_gc_ack_set_bit;
+ gc->chip_types[0].chip.irq_mask = irq_gc_mask_clr_bit;
+ gc->chip_types[0].chip.irq_unmask = irq_gc_mask_set_bit;
+
+ writel(0, moxart_irq_base + IRQ_MASK_REG);
+ writel(0xffffffff, moxart_irq_base + IRQ_CLEAR_REG);
+
+ writel(interrupt_mask, moxart_irq_base + IRQ_MODE_REG);
+ writel(interrupt_mask, moxart_irq_base + IRQ_LEVEL_REG);
+
+ set_handle_irq(moxart_handle_irq);
+
+ pr_info("%s: %s finished\n", node->full_name, __func__);
+
+ return 0;
+}
+IRQCHIP_DECLARE(moxa_moxart_ic, "moxa,moxart-interrupt-controller",
+ moxart_of_intc_init);
--
1.8.2.1
next prev parent reply other threads:[~2013-06-27 13:29 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-18 9:59 [PATCH] ARM: irqchip: add support for MOXA ART SoCs Jonas Jensen
2013-06-18 9:59 ` Jonas Jensen
2013-06-18 10:35 ` Russell King - ARM Linux
2013-06-18 10:35 ` Russell King - ARM Linux
2013-06-18 12:54 ` Arnd Bergmann
2013-06-18 12:54 ` Arnd Bergmann
2013-06-18 13:41 ` Thomas Petazzoni
2013-06-18 13:41 ` Thomas Petazzoni
2013-06-20 8:58 ` [PATCH v2] " Jonas Jensen
2013-06-20 8:58 ` Jonas Jensen
2013-06-20 10:17 ` Arnd Bergmann
2013-06-20 10:17 ` Arnd Bergmann
2013-06-24 13:18 ` Grant Likely
2013-06-24 13:18 ` Grant Likely
2013-06-27 13:29 ` Jonas Jensen [this message]
2013-06-27 13:29 ` [PATCH v3] ARM: " Jonas Jensen
2013-06-27 17:49 ` Uwe Kleine-König
2013-06-27 17:49 ` Uwe Kleine-König
2013-07-01 14:34 ` [PATCH v4] " Jonas Jensen
2013-07-01 14:34 ` Jonas Jensen
2013-07-04 12:38 ` [PATCH v5] " Jonas Jensen
2013-07-04 12:38 ` Jonas Jensen
2013-07-05 9:49 ` [tip:irq/urgent] irqchip: Add " tip-bot for Jonas Jensen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1372339773-4974-1-git-send-email-jonas.jensen@gmail.com \
--to=jonas.jensen@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.