From: dinguyen@altera.com (Dinh Nguyen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/4] Enable ethernet support for SOCFPGA
Date: Thu, 18 Jul 2013 08:12:53 -0500 [thread overview]
Message-ID: <1374153173.9004.4.camel@linux-builds1> (raw)
In-Reply-To: <20130718115951.GA2706@amd.pavel.ucw.cz>
Hi Jack,
On Thu, 2013-07-18 at 13:59 +0200, ZY - pavel wrote:
> Hi!
>
> > >These 4 patches are meant to enable ethernet and SD/MMC for the SOCFPGA
> > >platform.
> > >
> > >patch (1/4): Adds select ARM_TWD for the platform
> > >patch (2/4): Add platform specific initialization for the ethernet controller.
> > >patch (3/4): Commit 25c83b5c2 added "snps,phy-addr" for getting the PHY addr.
> > > Set the ethernet clocks to be emac_0_clk and emac_1_clk so it be gated.
> > >patch (4/4): Update defconfig to support SD/MMC, ethernet, EXT3 and NFS.
>
> > What tree is this based against, or what patches are a pre-requisite
> > to this series? I applied the patches to linux-arm/master but the
> > compile failed.
> >
> > arch/arm/mach-socfpga/socfpga.c: In function 'ksz9021rlrn_phy_fixup':
> > arch/arm/mach-socfpga/socfpga.c:85:21: error:
> > 'MICREL_KSZ9021_EXTREG_CTRL' undeclared (first use in this function)
> > phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
> > ^
>
> It seems it depends on:
>
> Date: Mon, 15 Jul 2013 18:08:50 -0500
> From: dinguyen at altera.com
> To: dinh.linux at gmail.com, netdev at vger.kernel.org
> Cc: Pavel Machek <pavel@denx.de>, Nicolas Ferre
> <nicolas.ferre@atmel.com>,
> "David S. Miller" <davem@davemloft.net>,
> linux-arm-kernel at lists.infradead.org,
> Shawn Guo <shawn.guo@linaro.org>,
> Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
> Andrew Victor <linux@maxim.org.za>,
> Dinh Nguyen <dinguyen@altera.com>
> Subject: [PATCH] phy: micrel: Add definitions for common Micrel PHY
> registers
> X-Mailer: git-send-email 1.7.9.5
>
> From: Dinh Nguyen <dinguyen@altera.com>
>
> Add defines for common Micrel PHY setups so that other platforms
> can use them. Update imx61 and sama5 hardware to use the micrel_phy.h
> PHY defines.
>
> Also add support for the KSZ9021RLRN PHY.
>
> Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Yes, the above patch is necessary. I was hoping that patch can go into
either Shawn's or Nicolas' tree. I have received ACKs from both. There
is also the SD/MMC bindings patch that has not been applied to the
arm-soc tree yet. I have started collecting the patches at github in the
meantime:
git at github.com:dinh-linux/linux-socfpga.git for-next
Dinh
>
> Pavel
next prev parent reply other threads:[~2013-07-18 13:12 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-17 23:10 [PATCH 0/4] Enable ethernet support for SOCFPGA dinguyen at altera.com
2013-07-17 23:10 ` [PATCH 1/4] arm: socfpga: Enable ARM_TWD for socfpga dinguyen at altera.com
2013-07-17 23:10 ` [PATCH 2/4] arm: socfpga: Add platform initialization for ethernet dinguyen at altera.com
2013-07-17 23:10 ` [PATCH 3/4] ARM: socfpga: dts: Fix entries for the ethernet entries dinguyen at altera.com
2013-07-17 23:10 ` [PATCH 4/4] arm: socfpga: Add support for SD/MMC and ethernet to defconfig dinguyen at altera.com
2013-07-18 9:16 ` [PATCH 0/4] Enable ethernet support for SOCFPGA Jack Mitchell
2013-07-18 11:35 ` Jack Mitchell
2013-07-18 11:59 ` Pavel Machek
2013-07-18 13:12 ` Dinh Nguyen [this message]
2013-07-18 13:38 ` Jack Mitchell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1374153173.9004.4.camel@linux-builds1 \
--to=dinguyen@altera.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.