From: ml@communistcode.co.uk (Jack Mitchell)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/4] Enable ethernet support for SOCFPGA
Date: Thu, 18 Jul 2013 10:16:47 +0100 [thread overview]
Message-ID: <51E7B27F.2000304@communistcode.co.uk> (raw)
In-Reply-To: <1374102623-4154-1-git-send-email-dinguyen@altera.com>
On 18/07/13 00:10, dinguyen at altera.com wrote:
> From: Dinh Nguyen <dinguyen@altera.com>
>
> Hello,
>
> These 4 patches are meant to enable ethernet and SD/MMC for the SOCFPGA
> platform.
>
> patch (1/4): Adds select ARM_TWD for the platform
> patch (2/4): Add platform specific initialization for the ethernet controller.
> patch (3/4): Commit 25c83b5c2 added "snps,phy-addr" for getting the PHY addr.
> Set the ethernet clocks to be emac_0_clk and emac_1_clk so it be gated.
> patch (4/4): Update defconfig to support SD/MMC, ethernet, EXT3 and NFS.
>
> Thanks,
>
> Dinh Nguyen (4):
> arm: socfpga: Enable ARM_TWD for socfpga
> arm: socfpga: Add platform initialization for ethernet
> ARM: socfpga: dts: Fix entries for the ethernet entries.
> arm: socfpga: Add support for SD/MMC and ethernet to defconfig
>
> arch/arm/boot/dts/socfpga.dtsi | 4 +-
> arch/arm/boot/dts/socfpga_cyclone5.dts | 2 +-
> arch/arm/configs/socfpga_defconfig | 8 +++
> arch/arm/mach-socfpga/Kconfig | 1 +
> arch/arm/mach-socfpga/core.h | 8 +++
> arch/arm/mach-socfpga/socfpga.c | 85 +++++++++++++++++++++++++++++++-
> 6 files changed, 104 insertions(+), 4 deletions(-)
>
> CC: Arnd Bergmann <arnd@arndb.de>
> CC: Olof Johansson <olof@lixom.net>
> Cc: Rob Herring <rob.herring@calxeda.com>
> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> Cc: Pavel Machek <pavel@denx.de>
> Cc: Jack Mitchell <jack.mitchell@dbbroadcast.co.uk>
>
Hi Dinh,
What tree is this based against, or what patches are a pre-requisite to
this series? I applied the patches to linux-arm/master but the compile
failed.
arch/arm/mach-socfpga/socfpga.c: In function 'ksz9021rlrn_phy_fixup':
arch/arm/mach-socfpga/socfpga.c:85:21: error:
'MICREL_KSZ9021_EXTREG_CTRL' undeclared (first use in this function)
phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
^
arch/arm/mach-socfpga/socfpga.c:85:21: note: each undeclared identifier
is reported only once for each function it appears in
arch/arm/mach-socfpga/socfpga.c:86:4: error:
'MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW' undeclared (first use in this
function)
MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW | 0x8000);
^
arch/arm/mach-socfpga/socfpga.c:87:21: error:
'MICREL_KSZ9021_EXTREG_DATA_WRITE' undeclared (first use in this function)
phy_write(phydev, MICREL_KSZ9021_EXTREG_DATA_WRITE, 0x0000);
^
arch/arm/mach-socfpga/socfpga.c:91:4: error:
'MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW' undeclared (first use in this
function)
MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW | 0x8000);
^
arch/arm/mach-socfpga/socfpga.c: In function 'socfpga_cyclone5_init':
arch/arm/mach-socfpga/socfpga.c:193:30: error: 'PHY_ID_KSZ9021RLRN'
undeclared (first use in this function)
phy_register_fixup_for_uid(PHY_ID_KSZ9021RLRN,
^
Cheers,
Jack.
--
Jack Mitchell (jack at embed.me.uk)
Embedded Systems Engineer
http://www.embed.me.uk
--
next prev parent reply other threads:[~2013-07-18 9:16 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-17 23:10 [PATCH 0/4] Enable ethernet support for SOCFPGA dinguyen at altera.com
2013-07-17 23:10 ` [PATCH 1/4] arm: socfpga: Enable ARM_TWD for socfpga dinguyen at altera.com
2013-07-17 23:10 ` [PATCH 2/4] arm: socfpga: Add platform initialization for ethernet dinguyen at altera.com
2013-07-17 23:10 ` [PATCH 3/4] ARM: socfpga: dts: Fix entries for the ethernet entries dinguyen at altera.com
2013-07-17 23:10 ` [PATCH 4/4] arm: socfpga: Add support for SD/MMC and ethernet to defconfig dinguyen at altera.com
2013-07-18 9:16 ` Jack Mitchell [this message]
2013-07-18 11:35 ` [PATCH 0/4] Enable ethernet support for SOCFPGA Jack Mitchell
2013-07-18 11:59 ` Pavel Machek
2013-07-18 13:12 ` Dinh Nguyen
2013-07-18 13:38 ` Jack Mitchell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51E7B27F.2000304@communistcode.co.uk \
--to=ml@communistcode.co.uk \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.