From: csd@broadcom.com (Christian Daudt)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] ARM: dts: align sdio numbers to HW definition
Date: Thu, 8 Aug 2013 12:07:53 -0700 [thread overview]
Message-ID: <1375988874-11303-1-git-send-email-csd@broadcom.com> (raw)
Clean up the sdio numbering to be 1-base as defined in HW spec,
instead of the current 0-base
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Christian Daudt <csd@broadcom.com>
diff --git a/arch/arm/boot/dts/bcm11351-brt.dts b/arch/arm/boot/dts/bcm11351-brt.dts
index 67ec524..647a78c 100644
--- a/arch/arm/boot/dts/bcm11351-brt.dts
+++ b/arch/arm/boot/dts/bcm11351-brt.dts
@@ -27,18 +27,18 @@
status = "okay";
};
- sdio0: sdio at 0x3f180000 {
+ sdio1: sdio at 3f180000 {
max-frequency = <48000000>;
status = "okay";
};
- sdio1: sdio at 0x3f190000 {
+ sdio2: sdio at 3f190000 {
non-removable;
max-frequency = <48000000>;
status = "okay";
};
- sdio3: sdio at 0x3f1b0000 {
+ sdio4: sdio at 3f1b0000 {
max-frequency = <48000000>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
index 8f094ba..d34e49db 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/bcm11351.dtsi
@@ -68,28 +68,28 @@
clock-frequency = <32768>;
};
- sdio0: sdio at 0x3f180000 {
+ sdio1: sdio at 3f180000 {
compatible = "bcm,kona-sdhci";
reg = <0x3f180000 0x10000>;
interrupts = <0x0 77 0x4>;
status = "disabled";
};
- sdio1: sdio at 0x3f190000 {
+ sdio2: sdio at 3f190000 {
compatible = "bcm,kona-sdhci";
reg = <0x3f190000 0x10000>;
interrupts = <0x0 76 0x4>;
status = "disabled";
};
- sdio2: sdio at 0x3f1a0000 {
+ sdio3: sdio at 3f1a0000 {
compatible = "bcm,kona-sdhci";
reg = <0x3f1a0000 0x10000>;
interrupts = <0x0 74 0x4>;
status = "disabled";
};
- sdio3: sdio at 0x3f1b0000 {
+ sdio4: sdio at 3f1b0000 {
compatible = "bcm,kona-sdhci";
reg = <0x3f1b0000 0x10000>;
interrupts = <0x0 73 0x4>;
--
1.7.10.4
WARNING: multiple messages have this Message-ID (diff)
From: "Christian Daudt" <csd@broadcom.com>
To: "Christian Daudt" <csd@broadcom.com>
Cc: "Lee Jones" <lee.jones@linaro.org>,
"Alex Elder" <elder@linaro.org>,
"Rob Herring" <rob.herring@calxeda.com>,
"Pawel Moll" <pawel.moll@arm.com>,
"Mark Rutland" <mark.rutland@arm.com>,
"Stephen Warren" <swarren@wwwdotorg.org>,
"Ian Campbell" <ian.campbell@citrix.com>,
"Russell King" <linux@arm.linux.org.uk>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] ARM: dts: align sdio numbers to HW definition
Date: Thu, 8 Aug 2013 12:07:53 -0700 [thread overview]
Message-ID: <1375988874-11303-1-git-send-email-csd@broadcom.com> (raw)
Clean up the sdio numbering to be 1-base as defined in HW spec,
instead of the current 0-base
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Christian Daudt <csd@broadcom.com>
diff --git a/arch/arm/boot/dts/bcm11351-brt.dts b/arch/arm/boot/dts/bcm11351-brt.dts
index 67ec524..647a78c 100644
--- a/arch/arm/boot/dts/bcm11351-brt.dts
+++ b/arch/arm/boot/dts/bcm11351-brt.dts
@@ -27,18 +27,18 @@
status = "okay";
};
- sdio0: sdio@0x3f180000 {
+ sdio1: sdio@3f180000 {
max-frequency = <48000000>;
status = "okay";
};
- sdio1: sdio@0x3f190000 {
+ sdio2: sdio@3f190000 {
non-removable;
max-frequency = <48000000>;
status = "okay";
};
- sdio3: sdio@0x3f1b0000 {
+ sdio4: sdio@3f1b0000 {
max-frequency = <48000000>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
index 8f094ba..d34e49db 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/bcm11351.dtsi
@@ -68,28 +68,28 @@
clock-frequency = <32768>;
};
- sdio0: sdio@0x3f180000 {
+ sdio1: sdio@3f180000 {
compatible = "bcm,kona-sdhci";
reg = <0x3f180000 0x10000>;
interrupts = <0x0 77 0x4>;
status = "disabled";
};
- sdio1: sdio@0x3f190000 {
+ sdio2: sdio@3f190000 {
compatible = "bcm,kona-sdhci";
reg = <0x3f190000 0x10000>;
interrupts = <0x0 76 0x4>;
status = "disabled";
};
- sdio2: sdio@0x3f1a0000 {
+ sdio3: sdio@3f1a0000 {
compatible = "bcm,kona-sdhci";
reg = <0x3f1a0000 0x10000>;
interrupts = <0x0 74 0x4>;
status = "disabled";
};
- sdio3: sdio@0x3f1b0000 {
+ sdio4: sdio@3f1b0000 {
compatible = "bcm,kona-sdhci";
reg = <0x3f1b0000 0x10000>;
interrupts = <0x0 73 0x4>;
--
1.7.10.4
next reply other threads:[~2013-08-08 19:07 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-08 19:07 Christian Daudt [this message]
2013-08-08 19:07 ` [PATCH 1/2] ARM: dts: align sdio numbers to HW definition Christian Daudt
2013-08-08 19:07 ` [PATCH 2/2] ARM: dts: add sdio blocks to bcm28155-ap board Christian Daudt
2013-08-08 19:07 ` Christian Daudt
2013-08-19 23:59 ` Christian Daudt
2013-08-19 23:59 ` Christian Daudt
2013-08-19 23:59 ` [PATCH 1/2] ARM: dts: align sdio numbers to HW definition Christian Daudt
2013-08-19 23:59 ` Christian Daudt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1375988874-11303-1-git-send-email-csd@broadcom.com \
--to=csd@broadcom.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.