From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Chris Ball <cjb@laptop.org>
Cc: linux-mmc@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-sh@vger.kernel.org, linux-spi@vger.kernel.org,
Hartley Sweeten <hsweeten@visionengravers.com>,
Ryan Mallon <rmallon@gmail.com>,
Guennadi Liakhovetski <g.liakhovetski@gmx.de>,
Ian Molton <ian@mnementh.co.uk>, Arnd Bergmann <arnd@arndb.de>,
Olof Johansson <olof@lixom.net>
Subject: Re: [PATCH v3 00/14] Remove platform callbacks from mmc_spi, sh_mmcif and sh_mobile_sdhi drivers
Date: Sat, 24 Aug 2013 03:28:30 +0200 [thread overview]
Message-ID: <1379845.qhfya0zTYh@avalon> (raw)
In-Reply-To: <1375958324-29683-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com>
Hi Chris,
On Thursday 08 August 2013 12:38:30 Laurent Pinchart wrote:
> Hello,
>
> This patch set replaces callbacks to board code with regulators and GPIOs in
> the mmc_spi, sh_mmcif and sh_mobile_sdhi MMC drivers.
>
> Most of the required infrastructure is in place already on the drivers side,
> except for CD debouncing support in the MMC core and CD/RO GPIOs support in
> the mmc_spi driver. The series thus starts with patches 01/14 and 02/14
> that add those features to the MMC core and mmc_spi driver.
>
> Patches 03/14 to 07/14 remove the board callbacks from the ecovec24 and
> vision_ep9307 boards. The code has been compile-tested only as I don't have
> access to those boards.
>
> Patches 08/14 to 14/14 then proceed to remove the callbacks from the drivers
> themselves and from the platform data structures.
>
> Compared to v2, the patches have been rebased on the mmc-next branch from
> git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc.git. I've also added
> patch 07/14 that removes the .set_pwr() callback from the ag5evm board to
> avoid compilation breakage during bisection.
>
> The series interleaves patches for drivers and board files. The ep93xx and
> ecovec24 patches have been acked, and the respective ARM subtree maintainers
> have indicated that they are fine with the patches going through the MMC
> tree. The ag5evm patch is new, but as the ag5evm board is going to be
> removed in v3.12, it shouldn't cause any issue.
>
> Chris, could you take the patches in your tree ? I've pushed them to
>
> git://linuxtv.org/pinchartl/fbdev.git mmc/devel
Ping ?
The following changes since commit 6d1d6b4759112acf4c079eb3a0dd296bdbf61cf5:
mmc: tmio: fix compiler warning (2013-07-23 15:06:47 -0400)
are available in the git repository at:
git://linuxtv.org/pinchartl/fbdev.git mmc/devel
for you to fetch changes up to a3424b35fdfd2d0fe507ef204d4ddebadd1e1157:
mmc: tmio-mmc: Remove .set_pwr() callback from platform data (2013-08-08
12:34:33 +0200)
----------------------------------------------------------------
Laurent Pinchart (14):
mmc: slot-gpio: Add debouncing capability to mmc_gpio_request_cd()
mmc: mmc_spi: Support CD/RO GPIOs
ARM: ep93xx: vision_ep9307: Use MMC CD and RO GPIO
sh: ecovec24: Use MMC/SDHI CD and RO GPIO
sh: ecovec24: Remove mmcif .down_pwr() callback
sh: ecovec24: Remove MMCIF and SDHI .set_pwr() callbacks
ARM: shmobile: ag5evm: Remove SDHI .set_pwr() callback
mmc: mmc_spi: Remove platform data .get_cd() and .get_ro() callbacks
mmc: sh_mmcif: Remove .down_pwr() callback from platform data
mmc: sh_mmcif: Remove .set_pwr() callback from platform data
mmc: sh_mobile_sdhi: Remove .get_cd() callback from platform data
mmc: sh_mobile_sdhi: Remove .set_pwr() callback from platform data
mmc: tmio-mmc: Remove .get_cd() callback from platform data
mmc: tmio-mmc: Remove .set_pwr() callback from platform data
arch/arm/mach-ep93xx/vision_ep9307.c | 57 +++------------------------
arch/arm/mach-shmobile/board-ag5evm.c | 23 -----------
arch/sh/boards/mach-ecovec24/setup.c | 89 +++-------------------------------
drivers/mmc/core/host.c | 2 +-
drivers/mmc/core/slot-gpio.c | 14 ++++++-
drivers/mmc/host/jz4740_mmc.c | 2 +-
drivers/mmc/host/mmc_spi.c | 49 +++++++++++-------------
drivers/mmc/host/mvsdio.c | 3 +-
drivers/mmc/host/of_mmc_spi.c | 46 ++++++----------------
drivers/mmc/host/sdhci-esdhc-imx.c | 2 +-
drivers/mmc/host/sdhci-pxav3.c | 3 +-
drivers/mmc/host/sdhci-sirf.c | 2 +-
drivers/mmc/host/sh_mmcif.c | 5 +--
drivers/mmc/host/sh_mobile_sdhi.c | 18 ---------
drivers/mmc/host/tmio_mmc.h | 1 -
drivers/mmc/host/tmio_mmc_pio.c | 25 +-----------
include/linux/mfd/tmio.h | 2 -
include/linux/mmc/sh_mmcif.h | 2 -
include/linux/mmc/sh_mobile_sdhi.h | 2 -
include/linux/mmc/slot-gpio.h | 3 +-
include/linux/spi/mmc_spi.h | 19 ++++++---
21 files changed, 86 insertions(+), 283 deletions(-)
> Laurent Pinchart (14):
> mmc: slot-gpio: Add debouncing capability to mmc_gpio_request_cd()
> mmc: mmc_spi: Support CD/RO GPIOs
> ARM: ep93xx: vision_ep9307: Use MMC CD and RO GPIO
> sh: ecovec24: Use MMC/SDHI CD and RO GPIO
> sh: ecovec24: Remove mmcif .down_pwr() callback
> sh: ecovec24: Remove MMCIF and SDHI .set_pwr() callbacks
> ARM: shmobile: ag5evm: Remove SDHI .set_pwr() callback
> mmc: mmc_spi: Remove platform data .get_cd() and .get_ro() callbacks
> mmc: sh_mmcif: Remove .down_pwr() callback from platform data
> mmc: sh_mmcif: Remove .set_pwr() callback from platform data
> mmc: sh_mobile_sdhi: Remove .get_cd() callback from platform data
> mmc: sh_mobile_sdhi: Remove .set_pwr() callback from platform data
> mmc: tmio-mmc: Remove .get_cd() callback from platform data
> mmc: tmio-mmc: Remove .set_pwr() callback from platform data
>
> arch/arm/mach-ep93xx/vision_ep9307.c | 57 ++--------------------
> arch/arm/mach-shmobile/board-ag5evm.c | 23 ---------
> arch/sh/boards/mach-ecovec24/setup.c | 89 ++++----------------------------
> drivers/mmc/core/host.c | 2 +-
> drivers/mmc/core/slot-gpio.c | 14 +++++-
> drivers/mmc/host/jz4740_mmc.c | 2 +-
> drivers/mmc/host/mmc_spi.c | 49 +++++++++----------
> drivers/mmc/host/mvsdio.c | 3 +-
> drivers/mmc/host/of_mmc_spi.c | 46 +++++-------------
> drivers/mmc/host/sdhci-esdhc-imx.c | 2 +-
> drivers/mmc/host/sdhci-pxav3.c | 3 +-
> drivers/mmc/host/sdhci-sirf.c | 2 +-
> drivers/mmc/host/sh_mmcif.c | 5 +-
> drivers/mmc/host/sh_mobile_sdhi.c | 18 -------
> drivers/mmc/host/tmio_mmc.h | 1 -
> drivers/mmc/host/tmio_mmc_pio.c | 25 +---------
> include/linux/mfd/tmio.h | 2 -
> include/linux/mmc/sh_mmcif.h | 2 -
> include/linux/mmc/sh_mobile_sdhi.h | 2 -
> include/linux/mmc/slot-gpio.h | 3 +-
> include/linux/spi/mmc_spi.h | 19 +++++---
> 21 files changed, 86 insertions(+), 283 deletions(-)
--
Regards,
Laurent Pinchart
WARNING: multiple messages have this Message-ID (diff)
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v3 00/14] Remove platform callbacks from mmc_spi, sh_mmcif and sh_mobile_sdhi drivers
Date: Sat, 24 Aug 2013 01:28:30 +0000 [thread overview]
Message-ID: <1379845.qhfya0zTYh@avalon> (raw)
In-Reply-To: <1375958324-29683-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com>
Hi Chris,
On Thursday 08 August 2013 12:38:30 Laurent Pinchart wrote:
> Hello,
>
> This patch set replaces callbacks to board code with regulators and GPIOs in
> the mmc_spi, sh_mmcif and sh_mobile_sdhi MMC drivers.
>
> Most of the required infrastructure is in place already on the drivers side,
> except for CD debouncing support in the MMC core and CD/RO GPIOs support in
> the mmc_spi driver. The series thus starts with patches 01/14 and 02/14
> that add those features to the MMC core and mmc_spi driver.
>
> Patches 03/14 to 07/14 remove the board callbacks from the ecovec24 and
> vision_ep9307 boards. The code has been compile-tested only as I don't have
> access to those boards.
>
> Patches 08/14 to 14/14 then proceed to remove the callbacks from the drivers
> themselves and from the platform data structures.
>
> Compared to v2, the patches have been rebased on the mmc-next branch from
> git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc.git. I've also added
> patch 07/14 that removes the .set_pwr() callback from the ag5evm board to
> avoid compilation breakage during bisection.
>
> The series interleaves patches for drivers and board files. The ep93xx and
> ecovec24 patches have been acked, and the respective ARM subtree maintainers
> have indicated that they are fine with the patches going through the MMC
> tree. The ag5evm patch is new, but as the ag5evm board is going to be
> removed in v3.12, it shouldn't cause any issue.
>
> Chris, could you take the patches in your tree ? I've pushed them to
>
> git://linuxtv.org/pinchartl/fbdev.git mmc/devel
Ping ?
The following changes since commit 6d1d6b4759112acf4c079eb3a0dd296bdbf61cf5:
mmc: tmio: fix compiler warning (2013-07-23 15:06:47 -0400)
are available in the git repository at:
git://linuxtv.org/pinchartl/fbdev.git mmc/devel
for you to fetch changes up to a3424b35fdfd2d0fe507ef204d4ddebadd1e1157:
mmc: tmio-mmc: Remove .set_pwr() callback from platform data (2013-08-08
12:34:33 +0200)
----------------------------------------------------------------
Laurent Pinchart (14):
mmc: slot-gpio: Add debouncing capability to mmc_gpio_request_cd()
mmc: mmc_spi: Support CD/RO GPIOs
ARM: ep93xx: vision_ep9307: Use MMC CD and RO GPIO
sh: ecovec24: Use MMC/SDHI CD and RO GPIO
sh: ecovec24: Remove mmcif .down_pwr() callback
sh: ecovec24: Remove MMCIF and SDHI .set_pwr() callbacks
ARM: shmobile: ag5evm: Remove SDHI .set_pwr() callback
mmc: mmc_spi: Remove platform data .get_cd() and .get_ro() callbacks
mmc: sh_mmcif: Remove .down_pwr() callback from platform data
mmc: sh_mmcif: Remove .set_pwr() callback from platform data
mmc: sh_mobile_sdhi: Remove .get_cd() callback from platform data
mmc: sh_mobile_sdhi: Remove .set_pwr() callback from platform data
mmc: tmio-mmc: Remove .get_cd() callback from platform data
mmc: tmio-mmc: Remove .set_pwr() callback from platform data
arch/arm/mach-ep93xx/vision_ep9307.c | 57 +++------------------------
arch/arm/mach-shmobile/board-ag5evm.c | 23 -----------
arch/sh/boards/mach-ecovec24/setup.c | 89 +++-------------------------------
drivers/mmc/core/host.c | 2 +-
drivers/mmc/core/slot-gpio.c | 14 ++++++-
drivers/mmc/host/jz4740_mmc.c | 2 +-
drivers/mmc/host/mmc_spi.c | 49 +++++++++++-------------
drivers/mmc/host/mvsdio.c | 3 +-
drivers/mmc/host/of_mmc_spi.c | 46 ++++++----------------
drivers/mmc/host/sdhci-esdhc-imx.c | 2 +-
drivers/mmc/host/sdhci-pxav3.c | 3 +-
drivers/mmc/host/sdhci-sirf.c | 2 +-
drivers/mmc/host/sh_mmcif.c | 5 +--
drivers/mmc/host/sh_mobile_sdhi.c | 18 ---------
drivers/mmc/host/tmio_mmc.h | 1 -
drivers/mmc/host/tmio_mmc_pio.c | 25 +-----------
include/linux/mfd/tmio.h | 2 -
include/linux/mmc/sh_mmcif.h | 2 -
include/linux/mmc/sh_mobile_sdhi.h | 2 -
include/linux/mmc/slot-gpio.h | 3 +-
include/linux/spi/mmc_spi.h | 19 ++++++---
21 files changed, 86 insertions(+), 283 deletions(-)
> Laurent Pinchart (14):
> mmc: slot-gpio: Add debouncing capability to mmc_gpio_request_cd()
> mmc: mmc_spi: Support CD/RO GPIOs
> ARM: ep93xx: vision_ep9307: Use MMC CD and RO GPIO
> sh: ecovec24: Use MMC/SDHI CD and RO GPIO
> sh: ecovec24: Remove mmcif .down_pwr() callback
> sh: ecovec24: Remove MMCIF and SDHI .set_pwr() callbacks
> ARM: shmobile: ag5evm: Remove SDHI .set_pwr() callback
> mmc: mmc_spi: Remove platform data .get_cd() and .get_ro() callbacks
> mmc: sh_mmcif: Remove .down_pwr() callback from platform data
> mmc: sh_mmcif: Remove .set_pwr() callback from platform data
> mmc: sh_mobile_sdhi: Remove .get_cd() callback from platform data
> mmc: sh_mobile_sdhi: Remove .set_pwr() callback from platform data
> mmc: tmio-mmc: Remove .get_cd() callback from platform data
> mmc: tmio-mmc: Remove .set_pwr() callback from platform data
>
> arch/arm/mach-ep93xx/vision_ep9307.c | 57 ++--------------------
> arch/arm/mach-shmobile/board-ag5evm.c | 23 ---------
> arch/sh/boards/mach-ecovec24/setup.c | 89 ++++----------------------------
> drivers/mmc/core/host.c | 2 +-
> drivers/mmc/core/slot-gpio.c | 14 +++++-
> drivers/mmc/host/jz4740_mmc.c | 2 +-
> drivers/mmc/host/mmc_spi.c | 49 +++++++++----------
> drivers/mmc/host/mvsdio.c | 3 +-
> drivers/mmc/host/of_mmc_spi.c | 46 +++++-------------
> drivers/mmc/host/sdhci-esdhc-imx.c | 2 +-
> drivers/mmc/host/sdhci-pxav3.c | 3 +-
> drivers/mmc/host/sdhci-sirf.c | 2 +-
> drivers/mmc/host/sh_mmcif.c | 5 +-
> drivers/mmc/host/sh_mobile_sdhi.c | 18 -------
> drivers/mmc/host/tmio_mmc.h | 1 -
> drivers/mmc/host/tmio_mmc_pio.c | 25 +---------
> include/linux/mfd/tmio.h | 2 -
> include/linux/mmc/sh_mmcif.h | 2 -
> include/linux/mmc/sh_mobile_sdhi.h | 2 -
> include/linux/mmc/slot-gpio.h | 3 +-
> include/linux/spi/mmc_spi.h | 19 +++++---
> 21 files changed, 86 insertions(+), 283 deletions(-)
--
Regards,
Laurent Pinchart
WARNING: multiple messages have this Message-ID (diff)
From: laurent.pinchart@ideasonboard.com (Laurent Pinchart)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 00/14] Remove platform callbacks from mmc_spi, sh_mmcif and sh_mobile_sdhi drivers
Date: Sat, 24 Aug 2013 03:28:30 +0200 [thread overview]
Message-ID: <1379845.qhfya0zTYh@avalon> (raw)
In-Reply-To: <1375958324-29683-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com>
Hi Chris,
On Thursday 08 August 2013 12:38:30 Laurent Pinchart wrote:
> Hello,
>
> This patch set replaces callbacks to board code with regulators and GPIOs in
> the mmc_spi, sh_mmcif and sh_mobile_sdhi MMC drivers.
>
> Most of the required infrastructure is in place already on the drivers side,
> except for CD debouncing support in the MMC core and CD/RO GPIOs support in
> the mmc_spi driver. The series thus starts with patches 01/14 and 02/14
> that add those features to the MMC core and mmc_spi driver.
>
> Patches 03/14 to 07/14 remove the board callbacks from the ecovec24 and
> vision_ep9307 boards. The code has been compile-tested only as I don't have
> access to those boards.
>
> Patches 08/14 to 14/14 then proceed to remove the callbacks from the drivers
> themselves and from the platform data structures.
>
> Compared to v2, the patches have been rebased on the mmc-next branch from
> git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc.git. I've also added
> patch 07/14 that removes the .set_pwr() callback from the ag5evm board to
> avoid compilation breakage during bisection.
>
> The series interleaves patches for drivers and board files. The ep93xx and
> ecovec24 patches have been acked, and the respective ARM subtree maintainers
> have indicated that they are fine with the patches going through the MMC
> tree. The ag5evm patch is new, but as the ag5evm board is going to be
> removed in v3.12, it shouldn't cause any issue.
>
> Chris, could you take the patches in your tree ? I've pushed them to
>
> git://linuxtv.org/pinchartl/fbdev.git mmc/devel
Ping ?
The following changes since commit 6d1d6b4759112acf4c079eb3a0dd296bdbf61cf5:
mmc: tmio: fix compiler warning (2013-07-23 15:06:47 -0400)
are available in the git repository at:
git://linuxtv.org/pinchartl/fbdev.git mmc/devel
for you to fetch changes up to a3424b35fdfd2d0fe507ef204d4ddebadd1e1157:
mmc: tmio-mmc: Remove .set_pwr() callback from platform data (2013-08-08
12:34:33 +0200)
----------------------------------------------------------------
Laurent Pinchart (14):
mmc: slot-gpio: Add debouncing capability to mmc_gpio_request_cd()
mmc: mmc_spi: Support CD/RO GPIOs
ARM: ep93xx: vision_ep9307: Use MMC CD and RO GPIO
sh: ecovec24: Use MMC/SDHI CD and RO GPIO
sh: ecovec24: Remove mmcif .down_pwr() callback
sh: ecovec24: Remove MMCIF and SDHI .set_pwr() callbacks
ARM: shmobile: ag5evm: Remove SDHI .set_pwr() callback
mmc: mmc_spi: Remove platform data .get_cd() and .get_ro() callbacks
mmc: sh_mmcif: Remove .down_pwr() callback from platform data
mmc: sh_mmcif: Remove .set_pwr() callback from platform data
mmc: sh_mobile_sdhi: Remove .get_cd() callback from platform data
mmc: sh_mobile_sdhi: Remove .set_pwr() callback from platform data
mmc: tmio-mmc: Remove .get_cd() callback from platform data
mmc: tmio-mmc: Remove .set_pwr() callback from platform data
arch/arm/mach-ep93xx/vision_ep9307.c | 57 +++------------------------
arch/arm/mach-shmobile/board-ag5evm.c | 23 -----------
arch/sh/boards/mach-ecovec24/setup.c | 89 +++-------------------------------
drivers/mmc/core/host.c | 2 +-
drivers/mmc/core/slot-gpio.c | 14 ++++++-
drivers/mmc/host/jz4740_mmc.c | 2 +-
drivers/mmc/host/mmc_spi.c | 49 +++++++++++-------------
drivers/mmc/host/mvsdio.c | 3 +-
drivers/mmc/host/of_mmc_spi.c | 46 ++++++----------------
drivers/mmc/host/sdhci-esdhc-imx.c | 2 +-
drivers/mmc/host/sdhci-pxav3.c | 3 +-
drivers/mmc/host/sdhci-sirf.c | 2 +-
drivers/mmc/host/sh_mmcif.c | 5 +--
drivers/mmc/host/sh_mobile_sdhi.c | 18 ---------
drivers/mmc/host/tmio_mmc.h | 1 -
drivers/mmc/host/tmio_mmc_pio.c | 25 +-----------
include/linux/mfd/tmio.h | 2 -
include/linux/mmc/sh_mmcif.h | 2 -
include/linux/mmc/sh_mobile_sdhi.h | 2 -
include/linux/mmc/slot-gpio.h | 3 +-
include/linux/spi/mmc_spi.h | 19 ++++++---
21 files changed, 86 insertions(+), 283 deletions(-)
> Laurent Pinchart (14):
> mmc: slot-gpio: Add debouncing capability to mmc_gpio_request_cd()
> mmc: mmc_spi: Support CD/RO GPIOs
> ARM: ep93xx: vision_ep9307: Use MMC CD and RO GPIO
> sh: ecovec24: Use MMC/SDHI CD and RO GPIO
> sh: ecovec24: Remove mmcif .down_pwr() callback
> sh: ecovec24: Remove MMCIF and SDHI .set_pwr() callbacks
> ARM: shmobile: ag5evm: Remove SDHI .set_pwr() callback
> mmc: mmc_spi: Remove platform data .get_cd() and .get_ro() callbacks
> mmc: sh_mmcif: Remove .down_pwr() callback from platform data
> mmc: sh_mmcif: Remove .set_pwr() callback from platform data
> mmc: sh_mobile_sdhi: Remove .get_cd() callback from platform data
> mmc: sh_mobile_sdhi: Remove .set_pwr() callback from platform data
> mmc: tmio-mmc: Remove .get_cd() callback from platform data
> mmc: tmio-mmc: Remove .set_pwr() callback from platform data
>
> arch/arm/mach-ep93xx/vision_ep9307.c | 57 ++--------------------
> arch/arm/mach-shmobile/board-ag5evm.c | 23 ---------
> arch/sh/boards/mach-ecovec24/setup.c | 89 ++++----------------------------
> drivers/mmc/core/host.c | 2 +-
> drivers/mmc/core/slot-gpio.c | 14 +++++-
> drivers/mmc/host/jz4740_mmc.c | 2 +-
> drivers/mmc/host/mmc_spi.c | 49 +++++++++----------
> drivers/mmc/host/mvsdio.c | 3 +-
> drivers/mmc/host/of_mmc_spi.c | 46 +++++-------------
> drivers/mmc/host/sdhci-esdhc-imx.c | 2 +-
> drivers/mmc/host/sdhci-pxav3.c | 3 +-
> drivers/mmc/host/sdhci-sirf.c | 2 +-
> drivers/mmc/host/sh_mmcif.c | 5 +-
> drivers/mmc/host/sh_mobile_sdhi.c | 18 -------
> drivers/mmc/host/tmio_mmc.h | 1 -
> drivers/mmc/host/tmio_mmc_pio.c | 25 +---------
> include/linux/mfd/tmio.h | 2 -
> include/linux/mmc/sh_mmcif.h | 2 -
> include/linux/mmc/sh_mobile_sdhi.h | 2 -
> include/linux/mmc/slot-gpio.h | 3 +-
> include/linux/spi/mmc_spi.h | 19 +++++---
> 21 files changed, 86 insertions(+), 283 deletions(-)
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2013-08-24 1:27 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-08 10:38 [PATCH v3 00/14] Remove platform callbacks from mmc_spi, sh_mmcif and sh_mobile_sdhi drivers Laurent Pinchart
2013-08-08 10:38 ` Laurent Pinchart
2013-08-08 10:38 ` Laurent Pinchart
2013-08-08 10:38 ` [PATCH v3 01/14] mmc: slot-gpio: Add debouncing capability to mmc_gpio_request_cd() Laurent Pinchart
2013-08-08 10:38 ` Laurent Pinchart
2013-08-08 10:38 ` Laurent Pinchart
2013-08-08 10:38 ` [PATCH v3 02/14] mmc: mmc_spi: Support CD/RO GPIOs Laurent Pinchart
2013-08-08 10:38 ` Laurent Pinchart
2013-08-08 10:38 ` Laurent Pinchart
2013-08-08 10:38 ` [PATCH v3 03/14] ARM: ep93xx: vision_ep9307: Use MMC CD and RO GPIO Laurent Pinchart
2013-08-08 10:38 ` Laurent Pinchart
2013-08-08 10:38 ` Laurent Pinchart
2013-08-08 10:38 ` [PATCH v3 04/14] sh: ecovec24: Use MMC/SDHI " Laurent Pinchart
2013-08-08 10:38 ` Laurent Pinchart
2013-08-08 10:38 ` Laurent Pinchart
2013-08-08 10:38 ` [PATCH v3 05/14] sh: ecovec24: Remove mmcif .down_pwr() callback Laurent Pinchart
2013-08-08 10:38 ` Laurent Pinchart
2013-08-08 10:38 ` Laurent Pinchart
2013-08-08 10:38 ` [PATCH v3 06/14] sh: ecovec24: Remove MMCIF and SDHI .set_pwr() callbacks Laurent Pinchart
2013-08-08 10:38 ` Laurent Pinchart
2013-08-08 10:38 ` Laurent Pinchart
2013-08-08 10:38 ` [PATCH v3 07/14] ARM: shmobile: ag5evm: Remove SDHI .set_pwr() callback Laurent Pinchart
2013-08-08 10:38 ` Laurent Pinchart
2013-08-08 10:38 ` Laurent Pinchart
2013-08-08 10:38 ` [PATCH v3 08/14] mmc: mmc_spi: Remove platform data .get_cd() and .get_ro() callbacks Laurent Pinchart
2013-08-08 10:38 ` Laurent Pinchart
2013-08-08 10:38 ` Laurent Pinchart
2013-08-08 10:38 ` [PATCH v3 09/14] mmc: sh_mmcif: Remove .down_pwr() callback from platform data Laurent Pinchart
2013-08-08 10:38 ` Laurent Pinchart
2013-08-08 10:38 ` Laurent Pinchart
2013-08-08 10:38 ` [PATCH v3 10/14] mmc: sh_mmcif: Remove .set_pwr() " Laurent Pinchart
2013-08-08 10:38 ` Laurent Pinchart
2013-08-08 10:38 ` Laurent Pinchart
2013-08-08 10:38 ` [PATCH v3 11/14] mmc: sh_mobile_sdhi: Remove .get_cd() " Laurent Pinchart
2013-08-08 10:38 ` Laurent Pinchart
2013-08-08 10:38 ` Laurent Pinchart
2013-08-08 10:38 ` [PATCH v3 12/14] mmc: sh_mobile_sdhi: Remove .set_pwr() " Laurent Pinchart
2013-08-08 10:38 ` Laurent Pinchart
2013-08-08 10:38 ` Laurent Pinchart
2013-08-08 10:38 ` [PATCH v3 13/14] mmc: tmio-mmc: Remove .get_cd() " Laurent Pinchart
2013-08-08 10:38 ` Laurent Pinchart
2013-08-08 10:38 ` Laurent Pinchart
2013-08-08 10:38 ` [PATCH v3 14/14] mmc: tmio-mmc: Remove .set_pwr() " Laurent Pinchart
2013-08-08 10:38 ` Laurent Pinchart
2013-08-08 10:38 ` Laurent Pinchart
2013-08-24 1:28 ` Laurent Pinchart [this message]
2013-08-24 1:28 ` [PATCH v3 00/14] Remove platform callbacks from mmc_spi, sh_mmcif and sh_mobile_sdhi drivers Laurent Pinchart
2013-08-24 1:28 ` Laurent Pinchart
2013-08-25 3:58 ` Chris Ball
2013-08-25 3:58 ` Chris Ball
2013-08-25 3:58 ` Chris Ball
2013-08-25 20:54 ` Laurent Pinchart
2013-08-25 20:54 ` Laurent Pinchart
2013-08-25 20:54 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1379845.qhfya0zTYh@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=arnd@arndb.de \
--cc=cjb@laptop.org \
--cc=g.liakhovetski@gmx.de \
--cc=hsweeten@visionengravers.com \
--cc=ian@mnementh.co.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=olof@lixom.net \
--cc=rmallon@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.