All of lore.kernel.org
 help / color / mirror / Atom feed
From: Antonio Quartulli <antonio@meshcoding.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, b.a.t.m.a.n@lists.open-mesh.org,
	Marek Lindner <lindner_marek@yahoo.de>,
	Antonio Quartulli <antonio@open-mesh.com>
Subject: [B.A.T.M.A.N.] [PATCH 12/18] batman-adv: make the AP isolation attribute VLAN specific
Date: Sun, 20 Oct 2013 00:22:04 +0200	[thread overview]
Message-ID: <1382221330-3769-13-git-send-email-antonio@meshcoding.com> (raw)
In-Reply-To: <1382221330-3769-1-git-send-email-antonio@meshcoding.com>

From: Antonio Quartulli <antonio@open-mesh.com>

AP isolation has to be enabled on one VLAN interface only.
This patch moves the AP isolation attribute to the per-vlan
interface attribute set, enabling it to have a different
value depending on the selected vlan.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
---
 Documentation/ABI/testing/sysfs-class-net-mesh |  5 +++--
 net/batman-adv/soft-interface.c                |  6 ++++--
 net/batman-adv/sysfs.c                         |  5 +++--
 net/batman-adv/translation-table.c             | 27 +++++++++++++++++++-------
 net/batman-adv/translation-table.h             |  2 +-
 net/batman-adv/types.h                         |  4 ++--
 6 files changed, 33 insertions(+), 16 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-class-net-mesh b/Documentation/ABI/testing/sysfs-class-net-mesh
index dfdea2b..0baa657 100644
--- a/Documentation/ABI/testing/sysfs-class-net-mesh
+++ b/Documentation/ABI/testing/sysfs-class-net-mesh
@@ -6,13 +6,14 @@ Description:
                 Indicates whether the batman protocol messages of the
                 mesh <mesh_iface> shall be aggregated or not.
 
-What:           /sys/class/net/<mesh_iface>/mesh/ap_isolation
+What:           /sys/class/net/<mesh_iface>/mesh/<vlan_subdir>/ap_isolation
 Date:           May 2011
 Contact:        Antonio Quartulli <antonio@meshcoding.com>
 Description:
                 Indicates whether the data traffic going from a
                 wireless client to another wireless client will be
-                silently dropped.
+                silently dropped. <vlan_subdir> is empty when referring
+		to the untagged lan.
 
 What:           /sys/class/net/<mesh_iface>/mesh/bonding
 Date:           June 2010
diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c
index f74200c..baa74b9 100644
--- a/net/batman-adv/soft-interface.c
+++ b/net/batman-adv/soft-interface.c
@@ -381,7 +381,8 @@ void batadv_interface_rx(struct net_device *soft_iface,
 		batadv_tt_add_temporary_global_entry(bat_priv, orig_node,
 						     ethhdr->h_source, vid);
 
-	if (batadv_is_ap_isolated(bat_priv, ethhdr->h_source, ethhdr->h_dest))
+	if (batadv_is_ap_isolated(bat_priv, ethhdr->h_source, ethhdr->h_dest,
+				  vid))
 		goto dropped;
 
 	netif_rx(skb);
@@ -458,6 +459,8 @@ int batadv_softif_create_vlan(struct batadv_priv *bat_priv, unsigned short vid)
 	vlan->vid = vid;
 	atomic_set(&vlan->refcount, 1);
 
+	atomic_set(&vlan->ap_isolation, 0);
+
 	err = batadv_sysfs_add_vlan(bat_priv->soft_iface, vlan);
 	if (err) {
 		kfree(vlan);
@@ -657,7 +660,6 @@ static int batadv_softif_init_late(struct net_device *dev)
 #ifdef CONFIG_BATMAN_ADV_DAT
 	atomic_set(&bat_priv->distributed_arp_table, 1);
 #endif
-	atomic_set(&bat_priv->ap_isolation, 0);
 	atomic_set(&bat_priv->gw_mode, BATADV_GW_MODE_OFF);
 	atomic_set(&bat_priv->gw_sel_class, 20);
 	atomic_set(&bat_priv->gw.bandwidth_down, 100);
diff --git a/net/batman-adv/sysfs.c b/net/batman-adv/sysfs.c
index f419d21..6335433 100644
--- a/net/batman-adv/sysfs.c
+++ b/net/batman-adv/sysfs.c
@@ -453,7 +453,6 @@ BATADV_ATTR_SIF_BOOL(distributed_arp_table, S_IRUGO | S_IWUSR,
 		     batadv_dat_status_update);
 #endif
 BATADV_ATTR_SIF_BOOL(fragmentation, S_IRUGO | S_IWUSR, batadv_update_min_mtu);
-BATADV_ATTR_SIF_BOOL(ap_isolation, S_IRUGO | S_IWUSR, NULL);
 static BATADV_ATTR(routing_algo, S_IRUGO, batadv_show_bat_algo, NULL);
 static BATADV_ATTR(gw_mode, S_IRUGO | S_IWUSR, batadv_show_gw_mode,
 		   batadv_store_gw_mode);
@@ -483,7 +482,6 @@ static struct batadv_attribute *batadv_mesh_attrs[] = {
 	&batadv_attr_distributed_arp_table,
 #endif
 	&batadv_attr_fragmentation,
-	&batadv_attr_ap_isolation,
 	&batadv_attr_routing_algo,
 	&batadv_attr_gw_mode,
 	&batadv_attr_orig_interval,
@@ -499,10 +497,13 @@ static struct batadv_attribute *batadv_mesh_attrs[] = {
 	NULL,
 };
 
+BATADV_ATTR_VLAN_BOOL(ap_isolation, S_IRUGO | S_IWUSR, NULL);
+
 /**
  * batadv_vlan_attrs - array of vlan specific sysfs attributes
  */
 static struct batadv_attribute *batadv_vlan_attrs[] = {
+	&batadv_attr_vlan_ap_isolation,
 	NULL,
 };
 
diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c
index 9bf928c..58794c4 100644
--- a/net/batman-adv/translation-table.c
+++ b/net/batman-adv/translation-table.c
@@ -1482,8 +1482,19 @@ struct batadv_orig_node *batadv_transtable_search(struct batadv_priv *bat_priv,
 	struct batadv_tt_global_entry *tt_global_entry = NULL;
 	struct batadv_orig_node *orig_node = NULL;
 	struct batadv_tt_orig_list_entry *best_entry;
+	bool ap_isolation_enabled = false;
+	struct batadv_softif_vlan *vlan;
 
-	if (src && atomic_read(&bat_priv->ap_isolation)) {
+	/* if the AP isolation is requested on a VLAN, then check for its
+	 * setting in the proper VLAN private data structure
+	 */
+	vlan = batadv_softif_vlan_get(bat_priv, vid);
+	if (vlan) {
+		ap_isolation_enabled = atomic_read(&vlan->ap_isolation);
+		batadv_softif_vlan_free_ref(vlan);
+	}
+
+	if (src && ap_isolation_enabled) {
 		tt_local_entry = batadv_tt_local_hash_find(bat_priv, src, vid);
 		if (!tt_local_entry ||
 		    (tt_local_entry->common.flags & BATADV_TT_CLIENT_PENDING))
@@ -2547,22 +2558,22 @@ void batadv_tt_local_commit_changes(struct batadv_priv *bat_priv)
 }
 
 bool batadv_is_ap_isolated(struct batadv_priv *bat_priv, uint8_t *src,
-			   uint8_t *dst)
+			   uint8_t *dst, unsigned short vid)
 {
 	struct batadv_tt_local_entry *tt_local_entry = NULL;
 	struct batadv_tt_global_entry *tt_global_entry = NULL;
+	struct batadv_softif_vlan *vlan;
 	bool ret = false;
 
-	if (!atomic_read(&bat_priv->ap_isolation))
+	vlan = batadv_softif_vlan_get(bat_priv, vid);
+	if (!vlan || !atomic_read(&vlan->ap_isolation))
 		goto out;
 
-	tt_local_entry = batadv_tt_local_hash_find(bat_priv, dst,
-						   BATADV_NO_FLAGS);
+	tt_local_entry = batadv_tt_local_hash_find(bat_priv, dst, vid);
 	if (!tt_local_entry)
 		goto out;
 
-	tt_global_entry = batadv_tt_global_hash_find(bat_priv, src,
-						     BATADV_NO_FLAGS);
+	tt_global_entry = batadv_tt_global_hash_find(bat_priv, src, vid);
 	if (!tt_global_entry)
 		goto out;
 
@@ -2572,6 +2583,8 @@ bool batadv_is_ap_isolated(struct batadv_priv *bat_priv, uint8_t *src,
 	ret = true;
 
 out:
+	if (vlan)
+		batadv_softif_vlan_free_ref(vlan);
 	if (tt_global_entry)
 		batadv_tt_global_entry_free_ref(tt_global_entry);
 	if (tt_local_entry)
diff --git a/net/batman-adv/translation-table.h b/net/batman-adv/translation-table.h
index 1d9506d..c6bf33c 100644
--- a/net/batman-adv/translation-table.h
+++ b/net/batman-adv/translation-table.h
@@ -39,7 +39,7 @@ void batadv_tt_free(struct batadv_priv *bat_priv);
 bool batadv_is_my_client(struct batadv_priv *bat_priv, const uint8_t *addr,
 			 unsigned short vid);
 bool batadv_is_ap_isolated(struct batadv_priv *bat_priv, uint8_t *src,
-			   uint8_t *dst);
+			   uint8_t *dst, unsigned short vid);
 void batadv_tt_local_commit_changes(struct batadv_priv *bat_priv);
 bool batadv_tt_global_client_is_roaming(struct batadv_priv *bat_priv,
 					uint8_t *addr, unsigned short vid);
diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h
index e5fecd4..04a0da6 100644
--- a/net/batman-adv/types.h
+++ b/net/batman-adv/types.h
@@ -534,6 +534,7 @@ struct batadv_priv_nc {
  * struct batadv_softif_vlan - per VLAN attributes set
  * @vid: VLAN identifier
  * @kobj: kobject for sysfs vlan subdirectory
+ * @ap_isolation: AP isolation state
  * @list: list node for bat_priv::softif_vlan_list
  * @refcount: number of context where this object is currently in use
  * @rcu: struct used for freeing in a RCU-safe manner
@@ -541,6 +542,7 @@ struct batadv_priv_nc {
 struct batadv_softif_vlan {
 	unsigned short vid;
 	struct kobject *kobj;
+	atomic_t ap_isolation;		/* boolean */
 	struct hlist_node list;
 	atomic_t refcount;
 	struct rcu_head rcu;
@@ -556,7 +558,6 @@ struct batadv_softif_vlan {
  * @bonding: bool indicating whether traffic bonding is enabled
  * @fragmentation: bool indicating whether traffic fragmentation is enabled
  * @frag_seqno: incremental counter to identify chains of egress fragments
- * @ap_isolation: bool indicating whether ap isolation is enabled
  * @bridge_loop_avoidance: bool indicating whether bridge loop avoidance is
  *  enabled
  * @distributed_arp_table: bool indicating whether distributed ARP table is
@@ -603,7 +604,6 @@ struct batadv_priv {
 	atomic_t bonding;
 	atomic_t fragmentation;
 	atomic_t frag_seqno;
-	atomic_t ap_isolation;
 #ifdef CONFIG_BATMAN_ADV_BLA
 	atomic_t bridge_loop_avoidance;
 #endif
-- 
1.8.4


WARNING: multiple messages have this Message-ID (diff)
From: Antonio Quartulli <antonio@meshcoding.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, b.a.t.m.a.n@lists.open-mesh.org,
	Antonio Quartulli <antonio@open-mesh.com>,
	Marek Lindner <lindner_marek@yahoo.de>
Subject: [PATCH 12/18] batman-adv: make the AP isolation attribute VLAN specific
Date: Sun, 20 Oct 2013 00:22:04 +0200	[thread overview]
Message-ID: <1382221330-3769-13-git-send-email-antonio@meshcoding.com> (raw)
In-Reply-To: <1382221330-3769-1-git-send-email-antonio@meshcoding.com>

From: Antonio Quartulli <antonio@open-mesh.com>

AP isolation has to be enabled on one VLAN interface only.
This patch moves the AP isolation attribute to the per-vlan
interface attribute set, enabling it to have a different
value depending on the selected vlan.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
---
 Documentation/ABI/testing/sysfs-class-net-mesh |  5 +++--
 net/batman-adv/soft-interface.c                |  6 ++++--
 net/batman-adv/sysfs.c                         |  5 +++--
 net/batman-adv/translation-table.c             | 27 +++++++++++++++++++-------
 net/batman-adv/translation-table.h             |  2 +-
 net/batman-adv/types.h                         |  4 ++--
 6 files changed, 33 insertions(+), 16 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-class-net-mesh b/Documentation/ABI/testing/sysfs-class-net-mesh
index dfdea2b..0baa657 100644
--- a/Documentation/ABI/testing/sysfs-class-net-mesh
+++ b/Documentation/ABI/testing/sysfs-class-net-mesh
@@ -6,13 +6,14 @@ Description:
                 Indicates whether the batman protocol messages of the
                 mesh <mesh_iface> shall be aggregated or not.
 
-What:           /sys/class/net/<mesh_iface>/mesh/ap_isolation
+What:           /sys/class/net/<mesh_iface>/mesh/<vlan_subdir>/ap_isolation
 Date:           May 2011
 Contact:        Antonio Quartulli <antonio@meshcoding.com>
 Description:
                 Indicates whether the data traffic going from a
                 wireless client to another wireless client will be
-                silently dropped.
+                silently dropped. <vlan_subdir> is empty when referring
+		to the untagged lan.
 
 What:           /sys/class/net/<mesh_iface>/mesh/bonding
 Date:           June 2010
diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c
index f74200c..baa74b9 100644
--- a/net/batman-adv/soft-interface.c
+++ b/net/batman-adv/soft-interface.c
@@ -381,7 +381,8 @@ void batadv_interface_rx(struct net_device *soft_iface,
 		batadv_tt_add_temporary_global_entry(bat_priv, orig_node,
 						     ethhdr->h_source, vid);
 
-	if (batadv_is_ap_isolated(bat_priv, ethhdr->h_source, ethhdr->h_dest))
+	if (batadv_is_ap_isolated(bat_priv, ethhdr->h_source, ethhdr->h_dest,
+				  vid))
 		goto dropped;
 
 	netif_rx(skb);
@@ -458,6 +459,8 @@ int batadv_softif_create_vlan(struct batadv_priv *bat_priv, unsigned short vid)
 	vlan->vid = vid;
 	atomic_set(&vlan->refcount, 1);
 
+	atomic_set(&vlan->ap_isolation, 0);
+
 	err = batadv_sysfs_add_vlan(bat_priv->soft_iface, vlan);
 	if (err) {
 		kfree(vlan);
@@ -657,7 +660,6 @@ static int batadv_softif_init_late(struct net_device *dev)
 #ifdef CONFIG_BATMAN_ADV_DAT
 	atomic_set(&bat_priv->distributed_arp_table, 1);
 #endif
-	atomic_set(&bat_priv->ap_isolation, 0);
 	atomic_set(&bat_priv->gw_mode, BATADV_GW_MODE_OFF);
 	atomic_set(&bat_priv->gw_sel_class, 20);
 	atomic_set(&bat_priv->gw.bandwidth_down, 100);
diff --git a/net/batman-adv/sysfs.c b/net/batman-adv/sysfs.c
index f419d21..6335433 100644
--- a/net/batman-adv/sysfs.c
+++ b/net/batman-adv/sysfs.c
@@ -453,7 +453,6 @@ BATADV_ATTR_SIF_BOOL(distributed_arp_table, S_IRUGO | S_IWUSR,
 		     batadv_dat_status_update);
 #endif
 BATADV_ATTR_SIF_BOOL(fragmentation, S_IRUGO | S_IWUSR, batadv_update_min_mtu);
-BATADV_ATTR_SIF_BOOL(ap_isolation, S_IRUGO | S_IWUSR, NULL);
 static BATADV_ATTR(routing_algo, S_IRUGO, batadv_show_bat_algo, NULL);
 static BATADV_ATTR(gw_mode, S_IRUGO | S_IWUSR, batadv_show_gw_mode,
 		   batadv_store_gw_mode);
@@ -483,7 +482,6 @@ static struct batadv_attribute *batadv_mesh_attrs[] = {
 	&batadv_attr_distributed_arp_table,
 #endif
 	&batadv_attr_fragmentation,
-	&batadv_attr_ap_isolation,
 	&batadv_attr_routing_algo,
 	&batadv_attr_gw_mode,
 	&batadv_attr_orig_interval,
@@ -499,10 +497,13 @@ static struct batadv_attribute *batadv_mesh_attrs[] = {
 	NULL,
 };
 
+BATADV_ATTR_VLAN_BOOL(ap_isolation, S_IRUGO | S_IWUSR, NULL);
+
 /**
  * batadv_vlan_attrs - array of vlan specific sysfs attributes
  */
 static struct batadv_attribute *batadv_vlan_attrs[] = {
+	&batadv_attr_vlan_ap_isolation,
 	NULL,
 };
 
diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c
index 9bf928c..58794c4 100644
--- a/net/batman-adv/translation-table.c
+++ b/net/batman-adv/translation-table.c
@@ -1482,8 +1482,19 @@ struct batadv_orig_node *batadv_transtable_search(struct batadv_priv *bat_priv,
 	struct batadv_tt_global_entry *tt_global_entry = NULL;
 	struct batadv_orig_node *orig_node = NULL;
 	struct batadv_tt_orig_list_entry *best_entry;
+	bool ap_isolation_enabled = false;
+	struct batadv_softif_vlan *vlan;
 
-	if (src && atomic_read(&bat_priv->ap_isolation)) {
+	/* if the AP isolation is requested on a VLAN, then check for its
+	 * setting in the proper VLAN private data structure
+	 */
+	vlan = batadv_softif_vlan_get(bat_priv, vid);
+	if (vlan) {
+		ap_isolation_enabled = atomic_read(&vlan->ap_isolation);
+		batadv_softif_vlan_free_ref(vlan);
+	}
+
+	if (src && ap_isolation_enabled) {
 		tt_local_entry = batadv_tt_local_hash_find(bat_priv, src, vid);
 		if (!tt_local_entry ||
 		    (tt_local_entry->common.flags & BATADV_TT_CLIENT_PENDING))
@@ -2547,22 +2558,22 @@ void batadv_tt_local_commit_changes(struct batadv_priv *bat_priv)
 }
 
 bool batadv_is_ap_isolated(struct batadv_priv *bat_priv, uint8_t *src,
-			   uint8_t *dst)
+			   uint8_t *dst, unsigned short vid)
 {
 	struct batadv_tt_local_entry *tt_local_entry = NULL;
 	struct batadv_tt_global_entry *tt_global_entry = NULL;
+	struct batadv_softif_vlan *vlan;
 	bool ret = false;
 
-	if (!atomic_read(&bat_priv->ap_isolation))
+	vlan = batadv_softif_vlan_get(bat_priv, vid);
+	if (!vlan || !atomic_read(&vlan->ap_isolation))
 		goto out;
 
-	tt_local_entry = batadv_tt_local_hash_find(bat_priv, dst,
-						   BATADV_NO_FLAGS);
+	tt_local_entry = batadv_tt_local_hash_find(bat_priv, dst, vid);
 	if (!tt_local_entry)
 		goto out;
 
-	tt_global_entry = batadv_tt_global_hash_find(bat_priv, src,
-						     BATADV_NO_FLAGS);
+	tt_global_entry = batadv_tt_global_hash_find(bat_priv, src, vid);
 	if (!tt_global_entry)
 		goto out;
 
@@ -2572,6 +2583,8 @@ bool batadv_is_ap_isolated(struct batadv_priv *bat_priv, uint8_t *src,
 	ret = true;
 
 out:
+	if (vlan)
+		batadv_softif_vlan_free_ref(vlan);
 	if (tt_global_entry)
 		batadv_tt_global_entry_free_ref(tt_global_entry);
 	if (tt_local_entry)
diff --git a/net/batman-adv/translation-table.h b/net/batman-adv/translation-table.h
index 1d9506d..c6bf33c 100644
--- a/net/batman-adv/translation-table.h
+++ b/net/batman-adv/translation-table.h
@@ -39,7 +39,7 @@ void batadv_tt_free(struct batadv_priv *bat_priv);
 bool batadv_is_my_client(struct batadv_priv *bat_priv, const uint8_t *addr,
 			 unsigned short vid);
 bool batadv_is_ap_isolated(struct batadv_priv *bat_priv, uint8_t *src,
-			   uint8_t *dst);
+			   uint8_t *dst, unsigned short vid);
 void batadv_tt_local_commit_changes(struct batadv_priv *bat_priv);
 bool batadv_tt_global_client_is_roaming(struct batadv_priv *bat_priv,
 					uint8_t *addr, unsigned short vid);
diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h
index e5fecd4..04a0da6 100644
--- a/net/batman-adv/types.h
+++ b/net/batman-adv/types.h
@@ -534,6 +534,7 @@ struct batadv_priv_nc {
  * struct batadv_softif_vlan - per VLAN attributes set
  * @vid: VLAN identifier
  * @kobj: kobject for sysfs vlan subdirectory
+ * @ap_isolation: AP isolation state
  * @list: list node for bat_priv::softif_vlan_list
  * @refcount: number of context where this object is currently in use
  * @rcu: struct used for freeing in a RCU-safe manner
@@ -541,6 +542,7 @@ struct batadv_priv_nc {
 struct batadv_softif_vlan {
 	unsigned short vid;
 	struct kobject *kobj;
+	atomic_t ap_isolation;		/* boolean */
 	struct hlist_node list;
 	atomic_t refcount;
 	struct rcu_head rcu;
@@ -556,7 +558,6 @@ struct batadv_softif_vlan {
  * @bonding: bool indicating whether traffic bonding is enabled
  * @fragmentation: bool indicating whether traffic fragmentation is enabled
  * @frag_seqno: incremental counter to identify chains of egress fragments
- * @ap_isolation: bool indicating whether ap isolation is enabled
  * @bridge_loop_avoidance: bool indicating whether bridge loop avoidance is
  *  enabled
  * @distributed_arp_table: bool indicating whether distributed ARP table is
@@ -603,7 +604,6 @@ struct batadv_priv {
 	atomic_t bonding;
 	atomic_t fragmentation;
 	atomic_t frag_seqno;
-	atomic_t ap_isolation;
 #ifdef CONFIG_BATMAN_ADV_BLA
 	atomic_t bridge_loop_avoidance;
 #endif
-- 
1.8.4

  parent reply	other threads:[~2013-10-19 22:22 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-10-19 22:21 [B.A.T.M.A.N.] (no subject) Antonio Quartulli
2013-10-19 22:21 ` (unknown), Antonio Quartulli
2013-10-19 22:21 ` [B.A.T.M.A.N.] [PATCH 01/18] batman-adv: check skb preparation return value Antonio Quartulli
2013-10-19 22:21   ` Antonio Quartulli
2013-10-19 22:21 ` [B.A.T.M.A.N.] [PATCH 02/18] batman-adv: update email address for Simon Wunderlich Antonio Quartulli
2013-10-19 22:21   ` Antonio Quartulli
2013-10-19 22:21 ` [B.A.T.M.A.N.] [PATCH 03/18] batman-adv: update email address for Antonio Quartulli Antonio Quartulli
2013-10-19 22:21   ` Antonio Quartulli
2013-10-19 22:21 ` [B.A.T.M.A.N.] [PATCH 04/18] batman-adv: update email address for Marek Lindner Antonio Quartulli
2013-10-19 22:21   ` Antonio Quartulli
2013-10-19 22:21 ` [B.A.T.M.A.N.] [PATCH 05/18] batman-adv: add the VLAN ID attribute to the TT entry Antonio Quartulli
2013-10-19 22:21   ` Antonio Quartulli
2013-10-19 22:21 ` [B.A.T.M.A.N.] [PATCH 06/18] batman-adv: use vid when computing local and global TT CRC Antonio Quartulli
2013-10-19 22:21   ` Antonio Quartulli
2013-10-19 22:21 ` [B.A.T.M.A.N.] [PATCH 07/18] batman-adv: print the VID together with the TT entries Antonio Quartulli
2013-10-19 22:21   ` Antonio Quartulli
2013-10-19 22:22 ` [B.A.T.M.A.N.] [PATCH 08/18] batman-adv: make the GW module correctly talk to the new VLAN-TT Antonio Quartulli
2013-10-19 22:22   ` Antonio Quartulli
2013-10-19 22:22 ` [B.A.T.M.A.N.] [PATCH 09/18] batman-adv: make the Distributed ARP Table vlan aware Antonio Quartulli
2013-10-19 22:22   ` Antonio Quartulli
2013-10-19 22:22 ` [B.A.T.M.A.N.] [PATCH 10/18] batman-adv: add per VLAN interface attribute framework Antonio Quartulli
2013-10-19 22:22   ` Antonio Quartulli
2013-10-19 22:22 ` [B.A.T.M.A.N.] [PATCH 11/18] batman-adv: add sysfs framework for VLAN Antonio Quartulli
2013-10-19 22:22   ` Antonio Quartulli
2013-10-19 22:22 ` Antonio Quartulli [this message]
2013-10-19 22:22   ` [PATCH 12/18] batman-adv: make the AP isolation attribute VLAN specific Antonio Quartulli
2013-10-19 22:22 ` [B.A.T.M.A.N.] [PATCH 13/18] batman-adv: refine API calls for unicast transmissions of SKBs Antonio Quartulli
2013-10-19 22:22   ` Antonio Quartulli
2013-10-19 22:22 ` [B.A.T.M.A.N.] [PATCH 14/18] batman-adv: remove bogus comment Antonio Quartulli
2013-10-19 22:22   ` Antonio Quartulli
2013-10-19 22:22 ` [B.A.T.M.A.N.] [PATCH 15/18] batman-adv: lock around TT operations to avoid sending inconsistent data Antonio Quartulli
2013-10-19 22:22   ` Antonio Quartulli
2013-10-19 22:22 ` [B.A.T.M.A.N.] [PATCH 16/18] batman-adv: make the TT CRC logic VLAN specific Antonio Quartulli
2013-10-19 22:22   ` Antonio Quartulli
2013-10-19 22:22 ` [B.A.T.M.A.N.] [PATCH 17/18] batman-adv: make the TT global purge routine " Antonio Quartulli
2013-10-19 22:22   ` Antonio Quartulli
2013-10-19 22:22 ` [B.A.T.M.A.N.] [PATCH 18/18] batman-adv: make the backbone gw check " Antonio Quartulli
2013-10-19 22:22   ` Antonio Quartulli
2013-10-20  0:15 ` [B.A.T.M.A.N.] (no subject) David Miller
2013-10-20  0:15   ` (unknown) David Miller
2013-10-20  7:57   ` [B.A.T.M.A.N.] your mail Antonio Quartulli
2013-10-20  7:57     ` Antonio Quartulli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1382221330-3769-13-git-send-email-antonio@meshcoding.com \
    --to=antonio@meshcoding.com \
    --cc=antonio@open-mesh.com \
    --cc=b.a.t.m.a.n@lists.open-mesh.org \
    --cc=davem@davemloft.net \
    --cc=lindner_marek@yahoo.de \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.