[PATCH 3/3] ARM: dts: i.MX53: Devicetree for Voipac Baseboard using x53-dmm-668 module

[lisovy@gmail.com (Rostislav Lisovy)]

Supported peripherals: Audio -- headphone output, LEDs, Buttons
(using keyboard controller), SD-card.

Signed-off-by: Rostislav Lisovy <lisovy@gmail.com>

 create mode 100644 arch/arm/boot/dts/imx53-voipac-bsb.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 802720e..5571af6 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -133,6 +133,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx53-mba53.dtb \
 	imx53-qsb.dtb \
 	imx53-smd.dtb \
+	imx53-voipac-bsb.dts \
 	imx6dl-sabreauto.dtb \
 	imx6dl-sabresd.dtb \
 	imx6dl-wandboard.dtb \
diff --git a/arch/arm/boot/dts/imx53-voipac-bsb.dts b/arch/arm/boot/dts/imx53-voipac-bsb.dts
new file mode 100644
index 0000000..5c88c0e
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-voipac-bsb.dts
@@ -0,0 +1,135 @@
+/*
+ * Copyright 2013 Rostislav Lisovy <lisovy@gmail.com>, PiKRON s.r.o.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx53-voipac-dmm-668.dtsi"
+
+/ {
+	sound {
+		compatible = "fsl,imx53-voipac-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx53-voipac-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <5>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio>;
+
+		led1 {
+			label = "led-red";
+			gpios = <&gpio3 29 0>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "led-orange";
+			gpios = <&gpio2 31 0>;
+			default-state = "off";
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	hog {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				/* SD2_CD */
+				MX53_PAD_EIM_D25__GPIO3_25	0x80000000
+				/* SD2_WP */
+				MX53_PAD_EIM_A19__GPIO2_19 	0x80000000
+			>;
+		};
+
+		led_pin_gpio: led_gpio {
+			fsl,pins = <
+				MX53_PAD_EIM_D29__GPIO3_29	0x80000000
+				MX53_PAD_EIM_EB3__GPIO2_31	0x80000000
+			>;
+		};
+	};
+
+	/* Keyboard controller */
+	kpp {
+		pinctrl_kpp_1: kppgrp-1 {
+			fsl,pins = <
+				MX53_PAD_GPIO_9__KPP_COL_6	0xe8
+				MX53_PAD_GPIO_4__KPP_COL_7	0xe8
+				MX53_PAD_KEY_COL2__KPP_COL_2	0xe8
+				MX53_PAD_KEY_COL3__KPP_COL_3	0xe8
+				MX53_PAD_KEY_COL4__KPP_COL_4	0xe8
+
+				MX53_PAD_GPIO_2__KPP_ROW_6	0xe0
+				MX53_PAD_GPIO_5__KPP_ROW_7	0xe0
+				MX53_PAD_KEY_ROW2__KPP_ROW_2	0xe0
+				MX53_PAD_KEY_ROW3__KPP_ROW_3	0xe0
+				MX53_PAD_KEY_ROW4__KPP_ROW_4	0xe0
+			>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux_1>; /* SSI1 */
+	status = "okay";
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2_1>;
+	cd-gpios = <&gpio3 25 0>;
+	wp-gpios = <&gpio2 19 0>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3_2>;
+	status = "okay";
+
+	sgtl5000: codec at 0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&clks 150>;
+	};
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp_1>;
+	linux,keymap = <
+			0x0203003b	/* KEY_F1 */
+			0x0603003c	/* KEY_F2 */
+			0x0207003d	/* KEY_F3 */
+			0x0607003e	/* KEY_F4 */
+			>;
+	keypad,num-rows = <8>;
+	keypad,num-columns = <1>;
+	status = "okay";
+};
+
+&ssi2 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
-- 
1.7.10.4