All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hannes Reinecke <hare@suse.de>
To: James Bottomley <jbottomley@parallels.com>
Cc: Christoph Hellwig <hch@infradead.org>,
	linux-scsi@vger.kernel.org, Ren Mingxin <renmx@cn.fujitsu.com>,
	Joern Engel <joern@logfs.org>,
	James Smart <james.smart@emulex.com>,
	Hannes Reinecke <hare@suse.de>
Subject: [PATCH 2/3] scsi: improved eh timeout handler
Date: Thu, 31 Oct 2013 14:02:52 +0100	[thread overview]
Message-ID: <1383224573-113346-3-git-send-email-hare@suse.de> (raw)
In-Reply-To: <1383224573-113346-1-git-send-email-hare@suse.de>

When a command runs into a timeout we need to send an 'ABORT TASK'
TMF. This is typically done by the 'eh_abort_handler' LLDD callback.

Conceptually, however, this function is a normal SCSI command, so
there is no need to enter the error handler.

This patch implements a new scsi_abort_command() function which
invokes an asynchronous function scsi_eh_abort_handler() to
abort the commands via the usual 'eh_abort_handler'.

If abort succeeds the command is either retried or terminated,
depending on the number of allowed retries. However, 'eh_eflags'
records the abort, so if the retry would fail again the
command is pushed onto the error handler without trying to
abort it (again); it'll be cleared up from SCSI EH.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Cc: Ren Mingxin <renmx@cn.fujitsu.com>
---
 drivers/scsi/scsi.c       |   3 +
 drivers/scsi/scsi_error.c | 152 ++++++++++++++++++++++++++++++++++++++++++----
 drivers/scsi/scsi_priv.h  |   2 +
 include/scsi/scsi_cmnd.h  |   2 +
 include/scsi/scsi_host.h  |   5 ++
 5 files changed, 151 insertions(+), 13 deletions(-)

diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index fe0bcb1..2b04a57 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -297,6 +297,7 @@ struct scsi_cmnd *scsi_get_command(struct scsi_device *dev, gfp_t gfp_mask)
 
 		cmd->device = dev;
 		INIT_LIST_HEAD(&cmd->list);
+		INIT_DELAYED_WORK(&cmd->abort_work, scmd_eh_abort_handler);
 		spin_lock_irqsave(&dev->list_lock, flags);
 		list_add_tail(&cmd->list, &dev->cmd_list);
 		spin_unlock_irqrestore(&dev->list_lock, flags);
@@ -353,6 +354,8 @@ void scsi_put_command(struct scsi_cmnd *cmd)
 	list_del_init(&cmd->list);
 	spin_unlock_irqrestore(&cmd->device->list_lock, flags);
 
+	cancel_delayed_work(&cmd->abort_work);
+
 	__scsi_put_command(cmd->device->host, cmd, &sdev->sdev_gendev);
 }
 EXPORT_SYMBOL(scsi_put_command);
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 67c0014..8bd2615 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -53,6 +53,8 @@ static void scsi_eh_done(struct scsi_cmnd *scmd);
 #define HOST_RESET_SETTLE_TIME  (10)
 
 static int scsi_eh_try_stu(struct scsi_cmnd *scmd);
+static int scsi_try_to_abort_cmd(struct scsi_host_template *,
+				 struct scsi_cmnd *);
 
 /* called with shost->host_lock held */
 void scsi_eh_wakeup(struct Scsi_Host *shost)
@@ -100,6 +102,117 @@ static int scsi_host_eh_past_deadline(struct Scsi_Host *shost)
 }
 
 /**
+ * scmd_eh_abort_handler - Handle command aborts
+ * @work:	command to be aborted.
+ */
+void
+scmd_eh_abort_handler(struct work_struct *work)
+{
+	struct scsi_cmnd *scmd =
+		container_of(work, struct scsi_cmnd, abort_work.work);
+	struct scsi_device *sdev = scmd->device;
+	unsigned long flags;
+	int rtn;
+
+	spin_lock_irqsave(sdev->host->host_lock, flags);
+	if (scsi_host_eh_past_deadline(sdev->host)) {
+		spin_unlock_irqrestore(sdev->host->host_lock, flags);
+		SCSI_LOG_ERROR_RECOVERY(3,
+			scmd_printk(KERN_INFO, scmd,
+				    "scmd %p eh timeout, not aborting\n",
+				    scmd));
+	} else {
+		spin_unlock_irqrestore(sdev->host->host_lock, flags);
+		SCSI_LOG_ERROR_RECOVERY(3,
+			scmd_printk(KERN_INFO, scmd,
+				    "aborting command %p\n", scmd));
+		rtn = scsi_try_to_abort_cmd(sdev->host->hostt, scmd);
+		if (rtn == SUCCESS) {
+			scmd->result |= DID_TIME_OUT << 16;
+			if (!scsi_noretry_cmd(scmd) &&
+			    (++scmd->retries <= scmd->allowed)) {
+				SCSI_LOG_ERROR_RECOVERY(3,
+					scmd_printk(KERN_WARNING, scmd,
+						    "scmd %p retry "
+						    "aborted command\n", scmd));
+				scsi_queue_insert(scmd, SCSI_MLQUEUE_EH_RETRY);
+			} else {
+				SCSI_LOG_ERROR_RECOVERY(3,
+					scmd_printk(KERN_WARNING, scmd,
+						    "scmd %p finish "
+						    "aborted command\n", scmd));
+				scsi_finish_command(scmd);
+			}
+			return;
+		}
+		SCSI_LOG_ERROR_RECOVERY(3,
+			scmd_printk(KERN_INFO, scmd,
+				    "scmd %p abort failed, rtn %d\n",
+				    scmd, rtn));
+	}
+
+	if (scsi_eh_scmd_add(scmd, 0)) {
+		SCSI_LOG_ERROR_RECOVERY(3,
+			scmd_printk(KERN_WARNING, scmd,
+				    "scmd %p terminate "
+				    "aborted command\n", scmd));
+		scmd->result |= DID_TIME_OUT << 16;
+		scsi_finish_command(scmd);
+	}
+}
+
+/**
+ * scsi_abort_command - schedule a command abort
+ * @scmd:	scmd to abort.
+ *
+ * We only need to abort commands after a command timeout
+ */
+int
+scsi_abort_command(struct scsi_cmnd *scmd)
+{
+	struct scsi_device *sdev = scmd->device;
+	struct Scsi_Host *shost = sdev->host;
+	unsigned long flags;
+
+	if (scmd->eh_eflags & SCSI_EH_ABORT_SCHEDULED) {
+		/*
+		 * command abort timed out.
+		 */
+		SCSI_LOG_ERROR_RECOVERY(3,
+			scmd_printk(KERN_INFO, scmd,
+				    "scmd %p abort timeout\n", scmd));
+		cancel_delayed_work(&scmd->abort_work);
+		return FAILED;
+	}
+
+	/*
+	 * Do not try a command abort if
+	 * SCSI EH has already started.
+	 */
+	spin_lock_irqsave(shost->host_lock, flags);
+	if (scsi_host_in_recovery(shost)) {
+		spin_unlock_irqrestore(shost->host_lock, flags);
+		SCSI_LOG_ERROR_RECOVERY(3,
+			scmd_printk(KERN_INFO, scmd,
+				    "scmd %p not aborting, host in recovery\n",
+				    scmd));
+		return FAILED;
+	}
+
+	if (shost->eh_deadline && !shost->last_reset)
+		shost->last_reset = jiffies;
+	spin_unlock_irqrestore(shost->host_lock, flags);
+
+	scmd->eh_eflags |= SCSI_EH_ABORT_SCHEDULED;
+	SCSI_LOG_ERROR_RECOVERY(3,
+		scmd_printk(KERN_INFO, scmd,
+			    "scmd %p abort scheduled\n", scmd));
+	schedule_delayed_work(&scmd->abort_work, HZ / 100);
+	return SUCCESS;
+}
+EXPORT_SYMBOL_GPL(scsi_abort_command);
+
+/**
  * scsi_eh_scmd_add - add scsi cmd to error handling.
  * @scmd:	scmd to run eh on.
  * @eh_flag:	optional SCSI_EH flag.
@@ -125,6 +238,8 @@ int scsi_eh_scmd_add(struct scsi_cmnd *scmd, int eh_flag)
 		shost->last_reset = jiffies;
 
 	ret = 1;
+	if (scmd->eh_eflags & SCSI_EH_ABORT_SCHEDULED)
+		eh_flag &= ~SCSI_EH_CANCEL_CMD;
 	scmd->eh_eflags |= eh_flag;
 	list_add_tail(&scmd->eh_entry, &shost->eh_cmd_q);
 	shost->host_failed++;
@@ -161,6 +276,10 @@ enum blk_eh_timer_return scsi_times_out(struct request *req)
 	else if (host->hostt->eh_timed_out)
 		rtn = host->hostt->eh_timed_out(scmd);
 
+	if (rtn == BLK_EH_NOT_HANDLED && !host->hostt->no_async_abort)
+		if (scsi_abort_command(scmd) == SUCCESS)
+			return BLK_EH_NOT_HANDLED;
+
 	scmd->result |= DID_TIME_OUT << 16;
 
 	if (unlikely(rtn == BLK_EH_NOT_HANDLED &&
@@ -1577,7 +1696,7 @@ static void scsi_eh_offline_sdevs(struct list_head *work_q,
 }
 
 /**
- * scsi_noretry_cmd - determinte if command should be failed fast
+ * scsi_noretry_cmd - determine if command should be failed fast
  * @scmd:	SCSI cmd to examine.
  */
 int scsi_noretry_cmd(struct scsi_cmnd *scmd)
@@ -1585,6 +1704,8 @@ int scsi_noretry_cmd(struct scsi_cmnd *scmd)
 	switch (host_byte(scmd->result)) {
 	case DID_OK:
 		break;
+	case DID_TIME_OUT:
+		goto check_type;
 	case DID_BUS_BUSY:
 		return (scmd->request->cmd_flags & REQ_FAILFAST_TRANSPORT);
 	case DID_PARITY:
@@ -1598,18 +1719,19 @@ int scsi_noretry_cmd(struct scsi_cmnd *scmd)
 		return (scmd->request->cmd_flags & REQ_FAILFAST_DRIVER);
 	}
 
-	switch (status_byte(scmd->result)) {
-	case CHECK_CONDITION:
-		/*
-		 * assume caller has checked sense and determinted
-		 * the check condition was retryable.
-		 */
-		if (scmd->request->cmd_flags & REQ_FAILFAST_DEV ||
-		    scmd->request->cmd_type == REQ_TYPE_BLOCK_PC)
-			return 1;
-	}
+	switch (status_byte(scmd->result) != CHECK_CONDITION)
+		return 0;
 
-	return 0;
+check_type:
+	/*
+	 * assume caller has checked sense and determined
+	 * the check condition was retryable.
+	 */
+	if (scmd->request->cmd_flags & REQ_FAILFAST_DEV ||
+	    scmd->request->cmd_type == REQ_TYPE_BLOCK_PC)
+		return 1;
+	else
+		return 0;
 }
 
 /**
@@ -1659,9 +1781,13 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd)
 		 * looks good.  drop through, and check the next byte.
 		 */
 		break;
+	case DID_ABORT:
+		if (scmd->eh_eflags & SCSI_EH_ABORT_SCHEDULED) {
+			scmd->result |= DID_TIME_OUT << 16;
+			return SUCCESS;
+		}
 	case DID_NO_CONNECT:
 	case DID_BAD_TARGET:
-	case DID_ABORT:
 		/*
 		 * note - this means that we just report the status back
 		 * to the top level driver, not that we actually think
diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h
index 8f9a0ca..f079a59 100644
--- a/drivers/scsi/scsi_priv.h
+++ b/drivers/scsi/scsi_priv.h
@@ -19,6 +19,7 @@ struct scsi_nl_hdr;
  * Scsi Error Handler Flags
  */
 #define SCSI_EH_CANCEL_CMD	0x0001	/* Cancel this cmd */
+#define SCSI_EH_ABORT_SCHEDULED	0x0002	/* Abort has been scheduled */
 
 #define SCSI_SENSE_VALID(scmd) \
 	(((scmd)->sense_buffer[0] & 0x70) == 0x70)
@@ -66,6 +67,7 @@ extern int __init scsi_init_devinfo(void);
 extern void scsi_exit_devinfo(void);
 
 /* scsi_error.c */
+extern void scmd_eh_abort_handler(struct work_struct *work);
 extern enum blk_eh_timer_return scsi_times_out(struct request *req);
 extern int scsi_error_handler(void *host);
 extern int scsi_decide_disposition(struct scsi_cmnd *cmd);
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
index de5f5d8..e3137e3 100644
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -55,6 +55,7 @@ struct scsi_cmnd {
 	struct scsi_device *device;
 	struct list_head list;  /* scsi_cmnd participates in queue lists */
 	struct list_head eh_entry; /* entry for the host eh_cmd_q */
+	struct delayed_work abort_work;
 	int eh_eflags;		/* Used by error handlr */
 
 	/*
@@ -144,6 +145,7 @@ extern void scsi_put_command(struct scsi_cmnd *);
 extern void __scsi_put_command(struct Scsi_Host *, struct scsi_cmnd *,
 			       struct device *);
 extern void scsi_finish_command(struct scsi_cmnd *cmd);
+extern enum blk_eh_timer_return scsi_abort_command(struct scsi_cmnd *cmd);
 
 extern void *scsi_kmap_atomic_sg(struct scatterlist *sg, int sg_count,
 				 size_t *offset, size_t *len);
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index 5460849..85430ae 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -476,6 +476,11 @@ struct scsi_host_template {
 	unsigned ordered_tag:1;
 
 	/*
+	 * True if asynchronous aborts are not supported
+	 */
+	unsigned no_async_abort:1;
+
+	/*
 	 * Countdown for host blocking with no commands outstanding.
 	 */
 	unsigned int max_host_blocked;
-- 
1.8.1.4


  parent reply	other threads:[~2013-10-31 13:02 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-10-31 13:02 [PATCHv8 0/3] New EH command timeout handler Hannes Reinecke
2013-10-31 13:02 ` [PATCH 1/3] scsi: Fix erratic device offline during EH Hannes Reinecke
2013-10-31 13:02 ` Hannes Reinecke [this message]
2013-10-31 15:49   ` [PATCH 2/3] scsi: improved eh timeout handler Christoph Hellwig
2013-11-04 13:36     ` Hannes Reinecke
2013-11-04 14:25       ` James Bottomley
2013-11-04 14:46         ` Hannes Reinecke
2013-11-04 14:50           ` James Bottomley
2013-11-04 15:43             ` Hannes Reinecke
2013-11-05  1:07               ` James Bottomley
2013-11-01  6:10   ` Ren Mingxin
2013-10-31 13:02 ` [PATCH 3/3] scsi: Update documentation Hannes Reinecke
  -- strict thread matches above, loose matches on Subject: below --
2013-09-02 11:58 [PATCHv6 0/3] New EH command timeout handler Hannes Reinecke
2013-09-02 11:58 ` [PATCH 2/3] scsi: improved eh " Hannes Reinecke
2013-09-11  9:16   ` Ren Mingxin
2013-09-12 20:49     ` Hannes Reinecke
2013-09-20  7:59   ` Ren Mingxin
2013-10-02 16:24     ` Hannes Reinecke

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1383224573-113346-3-git-send-email-hare@suse.de \
    --to=hare@suse.de \
    --cc=hch@infradead.org \
    --cc=james.smart@emulex.com \
    --cc=jbottomley@parallels.com \
    --cc=joern@logfs.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=renmx@cn.fujitsu.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.