All of lore.kernel.org
 help / color / mirror / Atom feed
From: Paulo Zanoni <przanoni@gmail.com>
To: intel-gfx@lists.freedesktop.org
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Subject: [PATCH 18/19] drm/i915: save some time when waiting the eDP timings
Date: Thu, 21 Nov 2013 13:47:32 -0200	[thread overview]
Message-ID: <1385048853-1579-19-git-send-email-przanoni@gmail.com> (raw)
In-Reply-To: <1385048853-1579-1-git-send-email-przanoni@gmail.com>

From: Paulo Zanoni <paulo.r.zanoni@intel.com>

The eDP spec defines some points where after you do action A, you have
to wait some time before action B. The thing is that in our driver
action B does not happen exactly after action A, but we still use
msleep() calls directly. What this patch happens is that we record the
timestamp of when action A happened, then, just before action B, we
look at how much time has passed and only sleep the remaining amount
needed.

With this change, I am able to save about 5-20ms (out of the total
200ms) of the backlight_off delay and completely skip the 1ms
backlight_on delay. The 600ms vdd_off delay doesn't happen during
normal usage anymore due to a previous patch.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
---
 drivers/gpu/drm/i915/intel_dp.c  | 38 +++++++++++++++++++++++++++++++++++---
 drivers/gpu/drm/i915/intel_drv.h |  3 +++
 2 files changed, 38 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index b438e76..3a1ca80 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1051,12 +1051,41 @@ static void ironlake_wait_panel_off(struct intel_dp *intel_dp)
 	ironlake_wait_panel_status(intel_dp, IDLE_OFF_MASK, IDLE_OFF_VALUE);
 }
 
+static void ironlake_wait_jiffies_delay(unsigned long timestamp,
+					int to_wait_ms)
+{
+	unsigned long target = timestamp + msecs_to_jiffies(to_wait_ms);
+	unsigned long diff;
+
+	if (time_after(target, jiffies)) {
+		diff = (long)target - (long)jiffies;
+		msleep(diff);
+	}
+}
+
 static void ironlake_wait_panel_power_cycle(struct intel_dp *intel_dp)
 {
 	DRM_DEBUG_KMS("Wait for panel power cycle\n");
+
+	/* When we disable the VDD override bit last we have to do the manual
+	 * wait. */
+	ironlake_wait_jiffies_delay(intel_dp->last_power_cycle,
+				    intel_dp->panel_power_cycle_delay);
+
 	ironlake_wait_panel_status(intel_dp, IDLE_CYCLE_MASK, IDLE_CYCLE_VALUE);
 }
 
+static void ironlake_wait_backlight_on(struct intel_dp *intel_dp)
+{
+	ironlake_wait_jiffies_delay(intel_dp->last_power_on,
+				    intel_dp->backlight_on_delay);
+}
+
+static void ironlake_edp_wait_backlight_off(struct intel_dp *intel_dp)
+{
+	ironlake_wait_jiffies_delay(intel_dp->last_backlight_off,
+				    intel_dp->backlight_off_delay);
+}
 
 /* Read the current pp_control value, unlocking the register if it
  * is locked
@@ -1144,7 +1173,7 @@ static void ironlake_panel_vdd_off_sync(struct intel_dp *intel_dp)
 		I915_READ(pp_stat_reg), I915_READ(pp_ctrl_reg));
 
 		if ((pp & POWER_TARGET_ON) == 0)
-			msleep(intel_dp->panel_power_cycle_delay);
+			intel_dp->last_power_cycle = jiffies;
 
 		intel_runtime_pm_put(dev_priv);
 	}
@@ -1219,6 +1248,7 @@ void ironlake_edp_panel_on(struct intel_dp *intel_dp)
 	POSTING_READ(pp_ctrl_reg);
 
 	ironlake_wait_panel_on(intel_dp);
+	intel_dp->last_power_on = jiffies;
 
 	if (IS_GEN5(dev)) {
 		pp |= PANEL_POWER_RESET; /* restore panel reset bit */
@@ -1239,6 +1269,8 @@ void ironlake_edp_panel_off(struct intel_dp *intel_dp)
 
 	DRM_DEBUG_KMS("Turn eDP power off\n");
 
+	ironlake_edp_wait_backlight_off(intel_dp);
+
 	pp = ironlake_get_pp_control(intel_dp);
 	/* We need to switch off panel power _and_ force vdd, for otherwise some
 	 * panels get very unhappy and cease to work. */
@@ -1270,7 +1302,7 @@ void ironlake_edp_backlight_on(struct intel_dp *intel_dp)
 	 * link.  So delay a bit to make sure the image is solid before
 	 * allowing it to appear.
 	 */
-	msleep(intel_dp->backlight_on_delay);
+	ironlake_wait_backlight_on(intel_dp);
 	pp = ironlake_get_pp_control(intel_dp);
 	pp |= EDP_BLC_ENABLE;
 
@@ -1302,7 +1334,7 @@ void ironlake_edp_backlight_off(struct intel_dp *intel_dp)
 
 	I915_WRITE(pp_ctrl_reg, pp);
 	POSTING_READ(pp_ctrl_reg);
-	msleep(intel_dp->backlight_off_delay);
+	intel_dp->last_backlight_off = jiffies;
 }
 
 static void ironlake_edp_pll_on(struct intel_dp *intel_dp)
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 5596498..778a7be 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -484,6 +484,9 @@ struct intel_dp {
 	int backlight_off_delay;
 	struct delayed_work panel_vdd_work;
 	bool want_panel_vdd;
+	unsigned long last_power_cycle;
+	unsigned long last_power_on;
+	unsigned long last_backlight_off;
 	bool psr_setup_done;
 	struct intel_connector *attached_connector;
 };
-- 
1.8.3.1

  parent reply	other threads:[~2013-11-21 15:48 UTC|newest]

Thread overview: 97+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-11-21 15:47 [PATCH 00/19] Haswell runtime PM support + D3 Paulo Zanoni
2013-11-21 15:47 ` [PATCH 01/19] drm/i915: WARN if !HAS_PC8 when enabling/disabling PC8 Paulo Zanoni
2013-11-29 11:11   ` Rodrigo Vivi
2013-11-29 12:55     ` Paulo Zanoni
2013-11-29 13:31       ` Rodrigo Vivi
2013-11-21 15:47 ` [PATCH 02/19] drm/i915: use the correct force_wake function at the PC8 code Paulo Zanoni
2013-11-27 19:57   ` Paulo Zanoni
2013-11-29 11:14     ` [Intel-gfx] " Rodrigo Vivi
2013-11-29 13:23       ` Daniel Vetter
2013-11-21 15:47 ` [PATCH 03/19] drm/i915: get a PC8 reference when enabling the power well Paulo Zanoni
2013-11-27 19:59   ` Paulo Zanoni
2013-11-29 12:35     ` Rodrigo Vivi
2013-11-29 13:34       ` Rodrigo Vivi
2013-12-10 21:29     ` Daniel Vetter
2013-11-21 15:47 ` [PATCH 04/19] drm/i915: get/put PC8 when we get/put a CRTC Paulo Zanoni
2013-11-21 16:12   ` Chris Wilson
2013-11-27 20:01     ` Paulo Zanoni
2013-11-29 12:38       ` Rodrigo Vivi
2013-11-29 13:34         ` Rodrigo Vivi
2013-12-04  9:01   ` Daniel Vetter
2013-12-04 13:44     ` Paulo Zanoni
2013-12-04 14:07       ` Daniel Vetter
2013-12-05 13:43         ` Paulo Zanoni
2013-12-05 14:40           ` Daniel Vetter
2013-12-06 22:29             ` [PATCH] drm/i915: change CRTC assertion on LCPLL disable Paulo Zanoni
2013-12-06 22:37               ` Daniel Vetter
2013-11-21 15:47 ` [PATCH 05/19] drm/i915: add initial Runtime PM functions Paulo Zanoni
2013-11-27 20:10   ` Paulo Zanoni
2013-11-29 12:54     ` Rodrigo Vivi
2013-11-29 13:33       ` Rodrigo Vivi
2013-11-29 14:05     ` Takashi Iwai
2013-12-06 22:31       ` Paulo Zanoni
2013-12-06 22:32         ` Paulo Zanoni
2013-12-08  9:06         ` Takashi Iwai
2013-12-02 12:23   ` Imre Deak
2013-11-21 15:47 ` [PATCH 06/19] drm/i915: do adapter power state notification at runtime PM Paulo Zanoni
2013-11-21 16:14   ` Chris Wilson
2013-11-27 20:13     ` Paulo Zanoni
2013-11-29 12:56       ` Rodrigo Vivi
2013-11-29 13:33         ` Rodrigo Vivi
2013-12-06 22:34         ` Paulo Zanoni
2013-11-21 15:47 ` [PATCH 07/19] drm/i915: add runtime put/get calls at the basic places Paulo Zanoni
2013-11-21 16:07   ` Chris Wilson
2013-11-25 20:55     ` Paulo Zanoni
2013-11-25 21:21       ` Chris Wilson
2013-11-27 20:20         ` Paulo Zanoni
2013-11-29 13:03           ` Rodrigo Vivi
2013-11-29 13:32             ` Rodrigo Vivi
2013-12-10 21:49             ` Daniel Vetter
2013-12-12 20:07               ` Paulo Zanoni
2013-12-12 20:54                 ` Daniel Vetter
2013-11-21 15:47 ` [PATCH 08/19] drm/i915: add some runtime PM get/put calls Paulo Zanoni
2013-11-27 20:21   ` Paulo Zanoni
2013-11-29 13:05     ` Rodrigo Vivi
2013-11-29 13:31       ` Rodrigo Vivi
2013-11-29 13:42       ` Daniel Vetter
2013-11-29 13:56         ` Paulo Zanoni
2013-11-21 15:47 ` [PATCH 09/19] drm/i915: get a runtime PM reference when the panel VDD is on Paulo Zanoni
2013-11-29 13:50   ` Rodrigo Vivi
2013-11-29 13:59     ` Paulo Zanoni
2013-11-29 14:37       ` Rodrigo Vivi
2013-12-06 22:23         ` Paulo Zanoni
2013-11-21 15:47 ` [PATCH 10/19] drm/i915: do not assert DE_PCH_EVENT_IVB enabled Paulo Zanoni
2013-11-29 14:30   ` Rodrigo Vivi
2013-12-10 21:54   ` Daniel Vetter
2013-11-21 15:47 ` [PATCH 11/19] drm/i915: disable interrupts when enabling PC8 Paulo Zanoni
2013-12-02 13:33   ` Rodrigo Vivi
2013-12-10 21:59   ` Daniel Vetter
2013-12-11 21:33     ` Paulo Zanoni
2013-11-21 15:47 ` [PATCH 12/19] drm/i915: release the GTT mmaps when going into D3 Paulo Zanoni
2013-11-21 16:02   ` Chris Wilson
2013-11-21 16:27     ` Paulo Zanoni
2013-12-10 22:03   ` Daniel Vetter
2013-11-21 15:47 ` [PATCH 13/19] drm: do not steal the display if we have a master Paulo Zanoni
2013-11-21 16:04   ` Chris Wilson
2013-11-27 20:24     ` Paulo Zanoni
2013-11-29 13:37       ` Daniel Vetter
2013-11-30 11:19       ` David Herrmann
2013-11-21 15:47 ` [PATCH 14/19] drm/i915: add runtime PM support on Haswell Paulo Zanoni
2013-12-02 13:37   ` Rodrigo Vivi
2013-12-10 22:10     ` Daniel Vetter
2013-12-10 22:06   ` Daniel Vetter
2013-11-21 15:47 ` [PATCH 15/19] drm/i915: don't enable VDD just to enable the panel Paulo Zanoni
2013-11-29 14:40   ` Rodrigo Vivi
2013-11-21 15:47 ` [PATCH 16/19] drm/i915: don't touch the VDD when disabling " Paulo Zanoni
2013-11-29 14:41   ` Rodrigo Vivi
2013-11-21 15:47 ` [PATCH 17/19] drm/i915: fix VDD override off wait Paulo Zanoni
2013-11-21 15:47 ` Paulo Zanoni [this message]
2013-11-21 16:00   ` [PATCH 18/19] drm/i915: save some time when waiting the eDP timings Chris Wilson
2013-11-25 22:17     ` Ben Widawsky
2013-11-25 23:25       ` Chris Wilson
2013-11-26  2:38         ` Ben Widawsky
2013-11-26  9:14           ` Chris Wilson
2013-11-26 15:53             ` Paulo Zanoni
2013-11-21 15:47 ` [PATCH 19/19] drm/i915: init the DP panel power seq regs earlier Paulo Zanoni
2013-12-05 15:00   ` Jani Nikula
2013-12-06 18:39     ` Paulo Zanoni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1385048853-1579-19-git-send-email-przanoni@gmail.com \
    --to=przanoni@gmail.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=paulo.r.zanoni@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.