[PATCH 6/9] multipathd: Implement systemd watchdog integration

[Hannes Reinecke <hare@suse.de>]

In the past there have been several instances where multipathd
would hang with the checkerloop as some path checker might not
be able to return in time.
This patch now activates the watchdog feature from systemd
to shutdown (and possibly restart) multipathd in these
situations.
Due to a bug in systemd watchdog integration only works
correctly with later version (> 206), so watchdog integration
has been disabled per default on earlier implementations.

Signed-off-by: Hannes Reinecke <hare@suse.de>
---
 multipath/multipath.conf.5       |  7 +++++--
 multipathd/Makefile              | 11 +++++++++--
 multipathd/main.c                | 15 ++++++++++++++-
 multipathd/multipathd.8          | 27 ++++++++++++++++++++++++++-
 multipathd/multipathd.service    | 17 -----------------
 multipathd/multipathd.service.in | 17 +++++++++++++++++
 6 files changed, 71 insertions(+), 23 deletions(-)
 delete mode 100644 multipathd/multipathd.service
 create mode 100644 multipathd/multipathd.service.in

diff --git a/multipath/multipath.conf.5 b/multipath/multipath.conf.5
index 0fd3035..cf5bec0 100644
--- a/multipath/multipath.conf.5
+++ b/multipath/multipath.conf.5
@@ -71,8 +71,11 @@ section recognizes the following keywords:
 .B polling_interval
 interval between two path checks in seconds. For properly functioning paths,
 the interval between checks will gradually increase to
-.B max_polling_interval;
-default is
+.B max_polling_interval.
+This value will be overridden by the
+.B WatchdogSec
+setting in the multipathd.service definition if systemd is used.
+Default is
 .I 5
 .TP
 .B max_polling_interval
diff --git a/multipathd/Makefile b/multipathd/Makefile
index 781122a..76b93fb 100644
--- a/multipathd/Makefile
+++ b/multipathd/Makefile
@@ -32,12 +32,19 @@ OBJS = main.o pidfile.o uxlsnr.o uxclnt.o cli.o cli_handlers.o
 #
 # directives
 #
-all : $(EXEC)
+all : $(EXEC) $(EXEC).service
 
 $(EXEC): $(OBJS)
 	$(CC) $(CFLAGS) $(OBJS) $(LDFLAGS) -o $(EXEC)
 	$(GZIP) $(EXEC).8 > $(EXEC).8.gz
 
+$(EXEC).service: $(EXEC).service.in
+ifeq ($(shell test $(SYSTEMD) -ge 207 && echo 1), 1)
+	sed '/ExecReload.*/a WatchdogSec=5s\nRestart=on-failure\nRestartPreventExitStatus=1' $(EXEC).service.in > $(EXEC).service
+else
+	cp $(EXEC).service.in $(EXEC).service
+endif
+
 install:
 	$(INSTALL_PROGRAM) -d $(DESTDIR)$(bindir)
 	$(INSTALL_PROGRAM) -m 755 $(EXEC) $(DESTDIR)$(bindir)
@@ -58,5 +65,5 @@ uninstall:
 	rm -f $(DESTDIR)$(unitdir)/$(EXEC).socket
 
 clean:
-	rm -f core *.o $(EXEC) *.gz
+	rm -f core *.o $(EXEC) $(EXEC).service *.gz
 
diff --git a/multipathd/main.c b/multipathd/main.c
index d8d1204..448ed39 100644
--- a/multipathd/main.c
+++ b/multipathd/main.c
@@ -1288,6 +1288,7 @@ checkerloop (void *ap)
 		lock(vecs->lock);
 		pthread_testcancel();
 		condlog(4, "tick");
+		sd_notify(0, "WATCHDOG=1");
 
 		if (vecs->pathvec) {
 			vector_foreach_slot (vecs->pathvec, pp, i) {
@@ -1587,7 +1588,8 @@ child (void * param)
 	pthread_attr_t log_attr, misc_attr, uevent_attr;
 	struct vectors * vecs;
 	struct multipath * mpp;
-	int i;
+	char *envp;
+	int i, checkint;
 	int rc, pid_rc;
 
 	mlockall(MCL_CURRENT | MCL_FUTURE);
@@ -1663,6 +1665,17 @@ child (void * param)
 
 	conf->daemon = 1;
 	udev_set_sync_support(0);
+	envp = getenv("WATCHDOG_USEC");
+	if (envp && sscanf(envp, "%d", &checkint) == 1) {
+		/* Value is in microseconds */
+		checkint = checkint / 1000000;
+		if (checkint > conf->max_checkint)
+			conf->max_checkint = checkint;
+		conf->checkint = checkint;
+		condlog(3, "set checkint to %d max %d",
+			conf->checkint, conf->max_checkint);
+	}
+
 	/*
 	 * Start uevent listener early to catch events
 	 */
diff --git a/multipathd/multipathd.8 b/multipathd/multipathd.8
index 2aea150..2ccf003 100644
--- a/multipathd/multipathd.8
+++ b/multipathd/multipathd.8
@@ -128,10 +128,35 @@ Restore queuing on multipahted map $map
 .B quit|exit
 End interactive session.
 
+.SH "SYSTEMD INTEGRATION"
+When compiled with systemd support two systemd service files are
+installed,
+.I multipathd.service
+and
+.I multipathd.socket
+The
+.I multipathd.socket
+service instructs systemd to intercept the CLI command socket, so
+that any call to the CLI interface will start-up the daemon if
+required.
+The
+.I multipathd.service
+file carries the definitions for controlling the multipath daemon.
+The daemon itself uses the
+.B sd_notify(3)
+interface to communicate with systemd. The multipath daemon supports
+the
+.I WatchdogSec=
+feature from systemd (see \fBsystemd.service(5)\fR).
+Please note that systemd prior to version 207 has issues which prevent
+the systemd-provided watchdog from working correctly. So for earlier
+versions of systemd watchdog support will not be enabled per default.
+
 .SH "SEE ALSO"
 .BR multipath (8)
 .BR kpartx (8)
-.BR hotplug (8)
+.BR sd_notify (3)
+.BR system.service (5)
 .SH "AUTHORS"
 .B multipathd
 was developed by Christophe Varoqui, <christophe.varoqui@opensvc.com> and others.
diff --git a/multipathd/multipathd.service b/multipathd/multipathd.service
deleted file mode 100644
index 3874bcb..0000000
--- a/multipathd/multipathd.service
+++ /dev/null
@@ -1,17 +0,0 @@
-[Unit]
-Description=Device-Mapper Multipath Device Controller
-Before=iscsi.service iscsid.service lvm2-activation-early.service
-After=syslog.target
-DefaultDependencies=no
-Conflicts=shutdown.target
-
-[Service]
-Type=notify
-NotifyAccess=main
-ExecStartPre=/sbin/modprobe dm-multipath
-ExecStart=/sbin/multipathd -d -s
-ExecReload=/sbin/multipathd reconfigure
-
-[Install]
-WantedBy=sysinit.target
-Also=multipathd.socket
diff --git a/multipathd/multipathd.service.in b/multipathd/multipathd.service.in
new file mode 100644
index 0000000..3874bcb
--- /dev/null
+++ b/multipathd/multipathd.service.in
@@ -0,0 +1,17 @@
+[Unit]
+Description=Device-Mapper Multipath Device Controller
+Before=iscsi.service iscsid.service lvm2-activation-early.service
+After=syslog.target
+DefaultDependencies=no
+Conflicts=shutdown.target
+
+[Service]
+Type=notify
+NotifyAccess=main
+ExecStartPre=/sbin/modprobe dm-multipath
+ExecStart=/sbin/multipathd -d -s
+ExecReload=/sbin/multipathd reconfigure
+
+[Install]
+WantedBy=sysinit.target
+Also=multipathd.socket
-- 
1.8.1.4