From: Tom Musta <tommusta@gmail.com>
To: qemu-devel@nongnu.org
Cc: Tom Musta <tommusta@gmail.com>, qemu-ppc@nongnu.org
Subject: [Qemu-devel] [V2 PATCH 16/18] target-ppc: Add ISA 2.06 ftsqrt
Date: Wed, 11 Dec 2013 13:16:36 -0600 [thread overview]
Message-ID: <1386789398-5239-17-git-send-email-tommusta@gmail.com> (raw)
In-Reply-To: <1386789398-5239-1-git-send-email-tommusta@gmail.com>
This patch adds the Floating Point Test for Square Root instruction
which was introduced in Power ISA 2.06.
Signed-off-by: Tom Musta <tommusta@gmail.com>
---
target-ppc/fpu_helper.c | 31 +++++++++++++++++++++++++++++++
target-ppc/helper.h | 1 +
target-ppc/translate.c | 14 ++++++++++++++
3 files changed, 46 insertions(+), 0 deletions(-)
diff --git a/target-ppc/fpu_helper.c b/target-ppc/fpu_helper.c
index 82ff0db..d5eb4ef 100644
--- a/target-ppc/fpu_helper.c
+++ b/target-ppc/fpu_helper.c
@@ -1034,6 +1034,37 @@ void helper_ftdiv(CPUPPCState *env, uint32_t bf, uint64_t fra, uint64_t frb)
env->crf[bf] = 0x8 | (fg_flag ? 4 : 0) | (fe_flag ? 2 : 0);
}
+void helper_ftsqrt(CPUPPCState *env, uint32_t bf, uint64_t frb)
+{
+ int fe_flag = 0;
+ int fg_flag = 0;
+
+ if (unlikely(float64_is_infinity(frb) || float64_is_zero(frb))) {
+ fe_flag = 1;
+ fg_flag = 1;
+ } else {
+ int e_b = ppc_float64_get_unbiased_exp(frb);
+
+ if (unlikely(float64_is_any_nan(frb))) {
+ fe_flag = 1;
+ } else if (unlikely(float64_is_zero(frb))) {
+ fe_flag = 1;
+ } else if (unlikely(float64_is_neg(frb))) {
+ fe_flag = 1;
+ } else if (!float64_is_zero(frb) && (e_b <= (-1022+52))) {
+ fe_flag = 1;
+ }
+
+ if (unlikely(float64_is_zero_or_denormal(frb))) {
+ /* XB is not zero because of the above check and */
+ /* therefore must be denormalized. */
+ fg_flag = 1;
+ }
+ }
+
+ env->crf[bf] = 0x8 | (fg_flag ? 4 : 0) | (fe_flag ? 2 : 0);
+}
+
void helper_fcmpu(CPUPPCState *env, uint64_t arg1, uint64_t arg2,
uint32_t crfD)
{
diff --git a/target-ppc/helper.h b/target-ppc/helper.h
index 5f5d3f6..ccf5711 100644
--- a/target-ppc/helper.h
+++ b/target-ppc/helper.h
@@ -98,6 +98,7 @@ DEF_HELPER_2(frsqrte, i64, env, i64)
DEF_HELPER_4(fsel, i64, env, i64, i64, i64)
DEF_HELPER_4(ftdiv, void, env, i32, i64, i64)
+DEF_HELPER_3(ftsqrt, void, env, i32, i64)
#define dh_alias_avr ptr
#define dh_ctype_avr ppc_avr_t *
diff --git a/target-ppc/translate.c b/target-ppc/translate.c
index 403e274..0833606 100644
--- a/target-ppc/translate.c
+++ b/target-ppc/translate.c
@@ -2313,6 +2313,19 @@ static void gen_ftdiv(DisasContext *ctx)
cpu_fpr[rB(ctx->opcode)]);
}
+static void gen_ftsqrt(DisasContext *ctx)
+{
+ TCGv_i32 bf;
+ if (unlikely(!ctx->fpu_enabled)) {
+ gen_exception(ctx, POWERPC_EXCP_FPU);
+ return;
+ }
+ /* NIP cannot be restored if the memory exception comes from an helper */
+ gen_update_nip(ctx, ctx->nip - 4);
+ bf = tcg_const_i32(crfD(ctx->opcode));
+ gen_helper_ftsqrt(cpu_env, bf, cpu_fpr[rB(ctx->opcode)]);
+}
+
/*** Floating-Point compare ***/
@@ -9818,6 +9831,7 @@ GEN_FLOAT_ACB(msub, 0x1C, 1, PPC_FLOAT),
GEN_FLOAT_ACB(nmadd, 0x1F, 1, PPC_FLOAT),
GEN_FLOAT_ACB(nmsub, 0x1E, 1, PPC_FLOAT),
GEN_HANDLER_E(ftdiv, 0x3F, 0x00, 0x04, 1, PPC_NONE, PPC2_ISA206),
+GEN_HANDLER_E(ftsqrt, 0x3F, 0x00, 0x05, 1, PPC_NONE, PPC2_ISA206),
GEN_FLOAT_B(ctiw, 0x0E, 0x00, 0, PPC_FLOAT),
GEN_HANDLER_E(fctiwu, 0x3F, 0x0E, 0x04, 0x00000000, PPC_NONE, PPC2_ISA206),
GEN_FLOAT_B(ctiwz, 0x0F, 0x00, 0, PPC_FLOAT),
--
1.7.1
next prev parent reply other threads:[~2013-12-11 19:18 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-11 19:16 [Qemu-devel] [V2 PATCH 00/18] target-ppc: Base ISA V2.06 for Power7/Power8 Tom Musta
2013-12-11 19:16 ` [Qemu-devel] [V2 PATCH 01/18] target-ppc: Add Flag for Power ISA V2.06 Tom Musta
2013-12-11 19:16 ` [Qemu-devel] [V2 PATCH 02/18] target-ppc: Add ISA2.06 bpermd Instruction Tom Musta
2013-12-11 21:19 ` Richard Henderson
2013-12-11 19:16 ` [Qemu-devel] [V2 PATCH 03/18] target-ppc: Add ISA2.06 divdeu[o] Instructions Tom Musta
2013-12-11 19:16 ` [Qemu-devel] [V2 PATCH 04/18] target-ppc: Add ISA2.06 divde[o] Instructions Tom Musta
2013-12-11 19:16 ` [Qemu-devel] [V2 PATCH 05/18] target-ppc: Add ISA 2.06 divwe[u][o] Instructions Tom Musta
2013-12-11 19:16 ` [Qemu-devel] [V2 PATCH 06/18] target-ppc: Add ISA2.06 lbarx, lharx Instructions Tom Musta
2013-12-11 19:16 ` [Qemu-devel] [V2 PATCH 07/18] target-ppc: Add ISA 2.06 stbcx. and sthcx. Instructions Tom Musta
2013-12-11 19:16 ` [Qemu-devel] [V2 PATCH 08/18] target-ppc: Add ISA2.06 Float to Integer Instructions Tom Musta
2013-12-11 19:16 ` [Qemu-devel] [V2 PATCH 09/18] softfloat: Fix Handling of Small Negatives in float64_to_uint64 Tom Musta
2013-12-11 19:16 ` [Qemu-devel] [V2 PATCH 10/18] softfloat: Fix float64_to_uint64_round_to_zero Tom Musta
2013-12-11 19:16 ` [Qemu-devel] [V2 PATCH 11/18] softfloat: Fix float64_to_uint32 Tom Musta
2013-12-11 19:53 ` Peter Maydell
2013-12-11 20:39 ` Tom Musta
2013-12-17 17:45 ` Peter Maydell
2013-12-17 19:32 ` Peter Maydell
2013-12-18 17:32 ` Tom Musta
2013-12-18 18:03 ` Peter Maydell
2013-12-18 18:23 ` Tom Musta
2013-12-11 19:16 ` [Qemu-devel] [V2 PATCH 12/18] softfloat: Fix float64_to_uint32_round_to_zero Tom Musta
2013-12-11 19:54 ` Peter Maydell
2013-12-11 19:16 ` [Qemu-devel] [V2 PATCH 13/18] target-ppc: Add ISA 2.06 fcfid[u][s] Instructions Tom Musta
2013-12-11 19:16 ` [Qemu-devel] [V2 PATCH 14/18] target-ppc: Fix and enable fri[mnpz] Tom Musta
2013-12-11 19:16 ` [Qemu-devel] [V2 PATCH 15/18] target-ppc: Add ISA 2.06 ftdiv Instruction Tom Musta
2013-12-11 19:16 ` Tom Musta [this message]
2013-12-11 19:16 ` [Qemu-devel] [V2 PATCH 17/18] target-ppc: Enable frsqrtes on Power7 and Power8 Tom Musta
2013-12-11 19:16 ` [Qemu-devel] [V2 PATCH 18/18] target-ppc: Add ISA2.06 lfiwzx Instruction Tom Musta
2013-12-11 19:40 ` [Qemu-devel] [V2 PATCH 00/18] target-ppc: Base ISA V2.06 for Power7/Power8 Peter Maydell
2013-12-11 19:42 ` Tom Musta
2013-12-11 19:50 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1386789398-5239-17-git-send-email-tommusta@gmail.com \
--to=tommusta@gmail.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.