From: Sergei Ianovich <ynvich@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 4/5] arm: pxa: update LP-8x4x to boot DT kernel
Date: Tue, 17 Dec 2013 05:03:43 +0400 [thread overview]
Message-ID: <1387242224-22495-5-git-send-email-ynvich@gmail.com> (raw)
In-Reply-To: <1387242224-22495-1-git-send-email-ynvich@gmail.com>
DT kernel requires CONFIG_OF_LIBFDT. 'bootm' needs to know DT location.
In addition, fix kernel console device and enable U-Boot long help.
Signed-off-by: Sergei Ianovich <ynvich@gmail.com>
CC: Marek Vasut <marex@denx.de>
---
Changes v1..v2
* don't disable USB
* update serial console
include/configs/lp8x4x.h | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/include/configs/lp8x4x.h b/include/configs/lp8x4x.h
index 565940c..501b94a 100644
--- a/include/configs/lp8x4x.h
+++ b/include/configs/lp8x4x.h
@@ -20,18 +20,18 @@
#define CONFIG_SYS_MALLOC_LEN (128*1024)
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_BOOTCOMMAND \
- "bootm 80000;"
+ "bootm 80000 - 240000;"
#define CONFIG_BOOTARGS \
- "console=ttySA0,115200 mem=128M root=/dev/mmcblk0p1 rw" \
- "init=/sbin/init rootfstype=ext3"
+ "console=ttyS0,115200 mem=128M root=/dev/mmcblk0p1 rw" \
+ "init=/sbin/init rootfstype=ext4 rootwait"
#define CONFIG_TIMESTAMP
#define CONFIG_BOOTDELAY 2 /* Autoboot delay */
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_LZMA /* LZMA compression support */
-#undef CONFIG_OF_LIBFDT
+#define CONFIG_OF_LIBFDT
/*
* Serial Console Configuration
@@ -101,7 +101,7 @@
*/
#define CONFIG_SYS_HUSH_PARSER 1
-#undef CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_LONGHELP
#ifdef CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT "$ "
#else
--
1.8.5.1
next prev parent reply other threads:[~2013-12-17 1:03 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-14 5:41 [U-Boot] [PATCH 0/4] fix and update LP-8x4x to boot DTS kernel Sergei Ianovich
2013-12-14 5:41 ` [U-Boot] [PATCH 1/4] ARM: pxa: prevent PXA270 occasional reboot freezes Sergei Ianovich
2013-12-14 12:29 ` Marek Vasut
2013-12-14 15:31 ` Sergei Ianovich
2013-12-14 17:14 ` Marek Vasut
2013-12-14 23:51 ` Sergei Ianovich
2013-12-15 5:17 ` Marek Vasut
2013-12-15 9:48 ` Sergei Ianovich
2013-12-15 15:04 ` Marek Vasut
2013-12-14 5:41 ` [U-Boot] [PATCH 2/4] arm: pxa: always init ethaddr for LP-8x4x Sergei Ianovich
2013-12-14 12:30 ` Marek Vasut
2013-12-14 15:39 ` Sergei Ianovich
2013-12-14 17:12 ` Marek Vasut
2013-12-14 20:53 ` Sergei Ianovich
2013-12-14 20:57 ` Marek Vasut
2013-12-14 23:53 ` Sergei Ianovich
2013-12-15 5:17 ` Marek Vasut
2013-12-15 9:44 ` Sergei Ianovich
2013-12-15 15:05 ` Marek Vasut
2013-12-15 18:43 ` Sergei Ianovich
2013-12-14 5:41 ` [U-Boot] [PATCH 3/4] arm: pxa: fix 2nd flash chip address on LP-8x4x Sergei Ianovich
2013-12-14 5:42 ` [U-Boot] [PATCH 4/4] arm: pxa: update LP-8x4x to boot DTS kernel Sergei Ianovich
2013-12-14 12:32 ` Marek Vasut
2013-12-14 15:41 ` Sergei Ianovich
2013-12-14 17:05 ` Marek Vasut
2013-12-15 9:57 ` Sergei Ianovich
2013-12-15 15:06 ` Marek Vasut
2013-12-15 18:56 ` Sergei Ianovich
2013-12-15 19:22 ` Marek Vasut
2013-12-17 1:07 ` Sergei Ianovich
2013-12-17 1:03 ` [U-Boot] [PATCH v2 0/5] fix and update LP-8x4x to boot DT kernel Sergei Ianovich
2013-12-17 1:03 ` [U-Boot] [PATCH v2 1/5] ARM: pxa: prevent PXA270 occasional reboot freezes Sergei Ianovich
2013-12-17 1:03 ` [U-Boot] [PATCH v2 2/5] arm: pxa: fix LP-8x4x USB support Sergei Ianovich
2013-12-18 15:01 ` Marek Vasut
2013-12-18 16:19 ` [U-Boot] [PATCH v3] " Sergei Ianovich
2013-12-18 17:15 ` Marek Vasut
2013-12-17 1:03 ` [U-Boot] [PATCH v2 3/5] arm: pxa: fix 2nd flash chip address on LP-8x4x Sergei Ianovich
2013-12-17 1:03 ` Sergei Ianovich [this message]
2013-12-17 1:03 ` [U-Boot] [PATCH v2 5/5] arm: pxa: init ethaddr for LP-8x4x using DT Sergei Ianovich
2013-12-18 15:01 ` [U-Boot] [PATCH v2 0/5] fix and update LP-8x4x to boot DT kernel Marek Vasut
2013-12-18 16:21 ` Sergei Ianovich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1387242224-22495-5-git-send-email-ynvich@gmail.com \
--to=ynvich@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.