From: Stephen Boyd <sboyd@codeaurora.org>
To: linux-arm-kernel@lists.infradead.org
Cc: Rohit Vaswani <rvaswani@codeaurora.org>,
David Brown <davidb@codeaurora.org>,
linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
Kumar Gala <galak@codeaurora.org>,
devicetree@vger.kernel.org, Mark Rutland <mark.rutland@arm.com>,
Arnd Bergmann <arnd@arndb.de>,
Russell King <linux@arm.linux.org.uk>
Subject: [PATCH v2 8/9] ARM: msm: Add SMP support for KPSSv2
Date: Mon, 23 Dec 2013 16:39:52 -0800 [thread overview]
Message-ID: <1387845593-10050-9-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1387845593-10050-1-git-send-email-sboyd@codeaurora.org>
From: Rohit Vaswani <rvaswani@codeaurora.org>
Implement support for the Krait CPU release sequence when the
CPUs are part of the second version of the Krait processor
subsystem.
Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
arch/arm/mach-msm/platsmp.c | 123 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 123 insertions(+)
diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c
index 4b13cd8..f07ad9d 100644
--- a/arch/arm/mach-msm/platsmp.c
+++ b/arch/arm/mach-msm/platsmp.c
@@ -38,7 +38,15 @@
#define L2DT_SLP BIT(3)
#define CLAMP BIT(0)
+#define APC_PWR_GATE_CTL 0x14
+#define BHS_CNT_SHIFT 24
+#define LDO_PWR_DWN_SHIFT 16
+#define LDO_BYP_SHIFT 8
+#define BHS_SEG_SHIFT 1
+#define BHS_EN BIT(0)
+
#define APCS_SAW2_VCTL 0x14
+#define APCS_SAW2_2_VCTL 0x1c
extern void secondary_startup(void);
@@ -157,6 +165,106 @@ out_acc:
return ret;
}
+static int kpssv2_release_secondary(unsigned int cpu)
+{
+ void __iomem *reg;
+ struct device_node *cpu_node, *l2_node, *acc_node, *saw_node;
+ void __iomem *l2_saw_base;
+ unsigned reg_val;
+ int ret;
+
+ cpu_node = of_get_cpu_node(cpu, NULL);
+ if (!cpu_node)
+ return -ENODEV;
+
+ acc_node = of_parse_phandle(cpu_node, "qcom,acc", 0);
+ if (!acc_node) {
+ ret = -ENODEV;
+ goto out_acc;
+ }
+
+ l2_node = of_parse_phandle(cpu_node, "next-level-cache", 0);
+ if (!l2_node) {
+ ret = -ENODEV;
+ goto out_l2;
+ }
+
+ saw_node = of_parse_phandle(l2_node, "qcom,saw", 0);
+ if (!saw_node) {
+ ret = -ENODEV;
+ goto out_saw;
+ }
+
+ reg = of_iomap(acc_node, 0);
+ if (!reg) {
+ ret = -ENOMEM;
+ goto out_map;
+ }
+
+ l2_saw_base = of_iomap(saw_node, 0);
+ if (!l2_saw_base) {
+ ret = -ENOMEM;
+ goto out_saw_map;
+ }
+
+ /* Turn on the BHS, turn off LDO Bypass and power down LDO */
+ reg_val = (64 << BHS_CNT_SHIFT) | (0x3f << LDO_PWR_DWN_SHIFT) | BHS_EN;
+ writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL);
+ mb();
+ /* wait for the BHS to settle */
+ udelay(1);
+
+ /* Turn on BHS segments */
+ reg_val |= 0x3f << BHS_SEG_SHIFT;
+ writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL);
+ mb();
+ /* wait for the BHS to settle */
+ udelay(1);
+
+ /* Finally turn on the bypass so that BHS supplies power */
+ reg_val |= 0x3f << LDO_BYP_SHIFT;
+ writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL);
+
+ /* enable max phases */
+ writel_relaxed(0x10003, l2_saw_base + APCS_SAW2_2_VCTL);
+ mb();
+ udelay(50);
+
+ reg_val = COREPOR_RST | CLAMP;
+ writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
+ mb();
+ udelay(2);
+
+ reg_val &= ~CLAMP;
+ writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
+ mb();
+ udelay(2);
+
+ reg_val &= ~COREPOR_RST;
+ writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
+ mb();
+
+ reg_val |= CORE_PWRD_UP;
+ writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
+ mb();
+
+ ret = 0;
+
+ iounmap(l2_saw_base);
+out_saw_map:
+ iounmap(reg);
+out_map:
+ of_node_put(saw_node);
+out_saw:
+ of_node_put(l2_node);
+out_l2:
+ of_node_put(acc_node);
+out_acc:
+ of_node_put(cpu_node);
+
+ return ret;
+}
+
static DEFINE_PER_CPU(int, cold_boot_done);
static int msm_boot_secondary(unsigned int cpu, int (*func)(unsigned int))
@@ -201,6 +309,11 @@ static int kpssv1_boot_secondary(unsigned int cpu, struct task_struct *idle)
return msm_boot_secondary(cpu, kpssv1_release_secondary);
}
+static int kpssv2_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ return msm_boot_secondary(cpu, kpssv2_release_secondary);
+}
+
static void __init msm_smp_prepare_cpus(unsigned int max_cpus)
{
int cpu, map;
@@ -250,3 +363,13 @@ static struct smp_operations msm_smp_kpssv1_ops __initdata = {
#endif
};
CPU_METHOD_OF_DECLARE(msm_smp_kpssv1, "qcom,kpss-acc-v1", &msm_smp_kpssv1_ops);
+
+static struct smp_operations msm_smp_kpssv2_ops __initdata = {
+ .smp_prepare_cpus = msm_smp_prepare_cpus,
+ .smp_secondary_init = msm_secondary_init,
+ .smp_boot_secondary = kpssv2_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = msm_cpu_die,
+#endif
+};
+CPU_METHOD_OF_DECLARE(msm_smp_kpssv2, "qcom,kpss-acc-v2", &msm_smp_kpssv2_ops);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
WARNING: multiple messages have this Message-ID (diff)
From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 8/9] ARM: msm: Add SMP support for KPSSv2
Date: Mon, 23 Dec 2013 16:39:52 -0800 [thread overview]
Message-ID: <1387845593-10050-9-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1387845593-10050-1-git-send-email-sboyd@codeaurora.org>
From: Rohit Vaswani <rvaswani@codeaurora.org>
Implement support for the Krait CPU release sequence when the
CPUs are part of the second version of the Krait processor
subsystem.
Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
arch/arm/mach-msm/platsmp.c | 123 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 123 insertions(+)
diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c
index 4b13cd8..f07ad9d 100644
--- a/arch/arm/mach-msm/platsmp.c
+++ b/arch/arm/mach-msm/platsmp.c
@@ -38,7 +38,15 @@
#define L2DT_SLP BIT(3)
#define CLAMP BIT(0)
+#define APC_PWR_GATE_CTL 0x14
+#define BHS_CNT_SHIFT 24
+#define LDO_PWR_DWN_SHIFT 16
+#define LDO_BYP_SHIFT 8
+#define BHS_SEG_SHIFT 1
+#define BHS_EN BIT(0)
+
#define APCS_SAW2_VCTL 0x14
+#define APCS_SAW2_2_VCTL 0x1c
extern void secondary_startup(void);
@@ -157,6 +165,106 @@ out_acc:
return ret;
}
+static int kpssv2_release_secondary(unsigned int cpu)
+{
+ void __iomem *reg;
+ struct device_node *cpu_node, *l2_node, *acc_node, *saw_node;
+ void __iomem *l2_saw_base;
+ unsigned reg_val;
+ int ret;
+
+ cpu_node = of_get_cpu_node(cpu, NULL);
+ if (!cpu_node)
+ return -ENODEV;
+
+ acc_node = of_parse_phandle(cpu_node, "qcom,acc", 0);
+ if (!acc_node) {
+ ret = -ENODEV;
+ goto out_acc;
+ }
+
+ l2_node = of_parse_phandle(cpu_node, "next-level-cache", 0);
+ if (!l2_node) {
+ ret = -ENODEV;
+ goto out_l2;
+ }
+
+ saw_node = of_parse_phandle(l2_node, "qcom,saw", 0);
+ if (!saw_node) {
+ ret = -ENODEV;
+ goto out_saw;
+ }
+
+ reg = of_iomap(acc_node, 0);
+ if (!reg) {
+ ret = -ENOMEM;
+ goto out_map;
+ }
+
+ l2_saw_base = of_iomap(saw_node, 0);
+ if (!l2_saw_base) {
+ ret = -ENOMEM;
+ goto out_saw_map;
+ }
+
+ /* Turn on the BHS, turn off LDO Bypass and power down LDO */
+ reg_val = (64 << BHS_CNT_SHIFT) | (0x3f << LDO_PWR_DWN_SHIFT) | BHS_EN;
+ writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL);
+ mb();
+ /* wait for the BHS to settle */
+ udelay(1);
+
+ /* Turn on BHS segments */
+ reg_val |= 0x3f << BHS_SEG_SHIFT;
+ writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL);
+ mb();
+ /* wait for the BHS to settle */
+ udelay(1);
+
+ /* Finally turn on the bypass so that BHS supplies power */
+ reg_val |= 0x3f << LDO_BYP_SHIFT;
+ writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL);
+
+ /* enable max phases */
+ writel_relaxed(0x10003, l2_saw_base + APCS_SAW2_2_VCTL);
+ mb();
+ udelay(50);
+
+ reg_val = COREPOR_RST | CLAMP;
+ writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
+ mb();
+ udelay(2);
+
+ reg_val &= ~CLAMP;
+ writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
+ mb();
+ udelay(2);
+
+ reg_val &= ~COREPOR_RST;
+ writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
+ mb();
+
+ reg_val |= CORE_PWRD_UP;
+ writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
+ mb();
+
+ ret = 0;
+
+ iounmap(l2_saw_base);
+out_saw_map:
+ iounmap(reg);
+out_map:
+ of_node_put(saw_node);
+out_saw:
+ of_node_put(l2_node);
+out_l2:
+ of_node_put(acc_node);
+out_acc:
+ of_node_put(cpu_node);
+
+ return ret;
+}
+
static DEFINE_PER_CPU(int, cold_boot_done);
static int msm_boot_secondary(unsigned int cpu, int (*func)(unsigned int))
@@ -201,6 +309,11 @@ static int kpssv1_boot_secondary(unsigned int cpu, struct task_struct *idle)
return msm_boot_secondary(cpu, kpssv1_release_secondary);
}
+static int kpssv2_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ return msm_boot_secondary(cpu, kpssv2_release_secondary);
+}
+
static void __init msm_smp_prepare_cpus(unsigned int max_cpus)
{
int cpu, map;
@@ -250,3 +363,13 @@ static struct smp_operations msm_smp_kpssv1_ops __initdata = {
#endif
};
CPU_METHOD_OF_DECLARE(msm_smp_kpssv1, "qcom,kpss-acc-v1", &msm_smp_kpssv1_ops);
+
+static struct smp_operations msm_smp_kpssv2_ops __initdata = {
+ .smp_prepare_cpus = msm_smp_prepare_cpus,
+ .smp_secondary_init = msm_secondary_init,
+ .smp_boot_secondary = kpssv2_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = msm_cpu_die,
+#endif
+};
+CPU_METHOD_OF_DECLARE(msm_smp_kpssv2, "qcom,kpss-acc-v2", &msm_smp_kpssv2_ops);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
next prev parent reply other threads:[~2013-12-24 0:39 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-24 0:39 [PATCH v2 0/9] CPU enable method based SMP/hotplug + MSM conversion Stephen Boyd
2013-12-24 0:39 ` Stephen Boyd
2013-12-24 0:39 ` [PATCH v2 1/9] devicetree: bindings: Document Krait/Scorpion cpus and enable-method Stephen Boyd
2013-12-24 0:39 ` Stephen Boyd
[not found] ` <1387845593-10050-2-git-send-email-sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2014-01-08 14:21 ` Mark Rutland
2014-01-08 14:21 ` Mark Rutland
2014-01-08 14:21 ` Mark Rutland
2014-01-08 23:21 ` Stephen Boyd
2014-01-08 23:21 ` Stephen Boyd
2013-12-24 0:39 ` [PATCH v2 2/9] devicetree: bindings: Document qcom,kpss-acc Stephen Boyd
2013-12-24 0:39 ` Stephen Boyd
2013-12-24 0:39 ` Stephen Boyd
2014-01-08 14:25 ` Mark Rutland
2014-01-08 14:25 ` Mark Rutland
2014-01-08 14:32 ` Mark Rutland
2014-01-08 14:32 ` Mark Rutland
2014-01-08 23:02 ` Stephen Boyd
2014-01-08 23:02 ` Stephen Boyd
2013-12-24 0:39 ` [PATCH v2 3/9] devicetree: bindings: Document qcom,saw2 node Stephen Boyd
2013-12-24 0:39 ` Stephen Boyd
2014-01-08 14:36 ` Mark Rutland
2014-01-08 14:36 ` Mark Rutland
2014-01-08 14:36 ` Mark Rutland
2014-01-08 15:21 ` Mark Rutland
2014-01-08 15:21 ` Mark Rutland
2013-12-24 0:39 ` [PATCH v2 4/9] ARM: Introduce CPU_METHOD_OF_DECLARE() for cpu hotplug/smp Stephen Boyd
2013-12-24 0:39 ` Stephen Boyd
2014-01-08 15:06 ` Mark Rutland
2014-01-08 15:06 ` Mark Rutland
2013-12-24 0:39 ` [PATCH v2 5/9] ARM: msm: Remove pen_release usage Stephen Boyd
2013-12-24 0:39 ` Stephen Boyd
2013-12-24 0:39 ` [PATCH v2 6/9] ARM: msm: Re-organize platsmp to make it extensible Stephen Boyd
2013-12-24 0:39 ` Stephen Boyd
2013-12-24 0:39 ` [PATCH v2 7/9] ARM: msm: Add SMP support for KPSSv1 Stephen Boyd
2013-12-24 0:39 ` Stephen Boyd
2013-12-24 0:39 ` Stephen Boyd [this message]
2013-12-24 0:39 ` [PATCH v2 8/9] ARM: msm: Add SMP support for KPSSv2 Stephen Boyd
2013-12-24 0:39 ` [PATCH v2 9/9] ARM: dts: msm: Add nodes necessary for SMP boot Stephen Boyd
2013-12-24 0:39 ` Stephen Boyd
[not found] ` <1387845593-10050-1-git-send-email-sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2014-01-06 22:19 ` [PATCH v2 0/9] CPU enable method based SMP/hotplug + MSM conversion Stephen Boyd
2014-01-06 22:19 ` Stephen Boyd
2014-01-06 22:19 ` Stephen Boyd
2014-01-08 15:20 ` Mark Rutland
2014-01-08 15:20 ` Mark Rutland
2014-01-08 21:37 ` Arnd Bergmann
2014-01-08 21:37 ` Arnd Bergmann
2014-01-09 1:50 ` Stephen Boyd
2014-01-09 1:50 ` Stephen Boyd
[not found] ` <52CE005A.3070802-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2014-01-23 22:04 ` Kumar Gala
2014-01-23 22:04 ` Kumar Gala
2014-01-23 22:04 ` Kumar Gala
2014-02-07 21:13 ` [PATCH v2 10/9] ARM: msm: Remove board-dt.c Stephen Boyd
2014-02-07 21:13 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1387845593-10050-9-git-send-email-sboyd@codeaurora.org \
--to=sboyd@codeaurora.org \
--cc=arnd@arndb.de \
--cc=davidb@codeaurora.org \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=rvaswani@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.