From: Florian Fainelli <florian@openwrt.org>
To: <linux-mips@linux-mips.org>
Cc: <ralf@linux-mips.org>, <blogic@openwrt.org>, <jogo@openwrt.org>,
<mbizon@freebox.fr>, <cernekee@gmail.com>, <dgcbueu@gmail.com>,
Florian Fainelli <florian@openwrt.org>
Subject: [PATCH 1/3] MIPS: introduce MIPS_L1_CACHE_SHIFT_<N>
Date: Fri, 10 Jan 2014 12:35:12 -0800 [thread overview]
Message-ID: <1389386114-31834-2-git-send-email-florian@openwrt.org> (raw)
In-Reply-To: <1389386114-31834-1-git-send-email-florian@openwrt.org>
In order to avoid keeping an ever growing list of chips which need to
select a specific MIPS_L1_CACHE_SHIFT value introduce multiple internal
and non-exposed Kconfig symbols for the various MIPS_L1_CACHE_SHIFT
values out there and update the relevant Kconfig symbols to select them.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
---
arch/mips/Kconfig | 18 ++++++++++++++++++
arch/mips/pmcs-msp71xx/Kconfig | 1 +
arch/mips/ralink/Kconfig | 1 +
3 files changed, 20 insertions(+)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 17cc7ff..753c5a3 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -183,6 +183,7 @@ config MACH_DECSTATION
select SYS_SUPPORTS_128HZ
select SYS_SUPPORTS_256HZ
select SYS_SUPPORTS_1024HZ
+ select MIPS_L1_CACHE_SHIFT_4
help
This enables support for DEC's MIPS based workstations. For details
see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the
@@ -468,6 +469,7 @@ config SGI_IP22
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
+ select MIPS_L1_CACHE_SHIFT_7
help
This are the SGI Indy, Challenge S and Indigo2, as well as certain
OEM variants like the Tandem CMN B006S. To compile a Linux kernel
@@ -488,6 +490,7 @@ config SGI_IP27
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_NUMA
select SYS_SUPPORTS_SMP
+ select MIPS_L1_CACHE_SHIFT_7
help
This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
workstations. To compile a Linux kernel that runs on these, say Y
@@ -694,6 +697,7 @@ config MIKROTIK_RB532
select SWAP_IO_SPACE
select BOOT_RAW
select ARCH_REQUIRE_GPIOLIB
+ select MIPS_L1_CACHE_SHIFT_4
help
Support the Mikrotik(tm) RouterBoard 532 series,
based on the IDT RC32434 SoC.
@@ -1088,6 +1092,18 @@ config FW_SNIPROM
config BOOT_ELF32
bool
+config MIPS_L1_CACHE_SHIFT_4
+ bool
+
+config MIPS_L1_CACHE_SHIFT_5
+ def_bool y
+
+config MIPS_L1_CACHE_SHIFT_6
+ bool
+
+config MIPS_L1_CACHE_SHIFT_7
+ bool
+
config MIPS_L1_CACHE_SHIFT
int
default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL || SOC_RT288X
@@ -1372,6 +1388,7 @@ config CPU_CAVIUM_OCTEON
select LIBFDT
select USE_OF
select USB_EHCI_BIG_ENDIAN_MMIO
+ select MIPS_L1_CACHE_SHIFT_7
help
The Cavium Octeon processor is a highly integrated chip containing
many ethernet hardware widgets for networking tasks. The processor
@@ -1794,6 +1811,7 @@ config IP22_CPU_SCACHE
config MIPS_CPU_SCACHE
bool
select BOARD_SCACHE
+ select MIPS_L1_CACHE_SHIFT_6
config R5000_CPU_SCACHE
bool
diff --git a/arch/mips/pmcs-msp71xx/Kconfig b/arch/mips/pmcs-msp71xx/Kconfig
index 3482b8c..6073ca4 100644
--- a/arch/mips/pmcs-msp71xx/Kconfig
+++ b/arch/mips/pmcs-msp71xx/Kconfig
@@ -6,6 +6,7 @@ config PMC_MSP4200_EVAL
bool "PMC-Sierra MSP4200 Eval Board"
select IRQ_MSP_SLP
select HW_HAS_PCI
+ select MIPS_L1_CACHE_SHIFT_4
config PMC_MSP4200_GW
bool "PMC-Sierra MSP4200 VoIP Gateway"
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
index 424f034..1bfd1c1 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -15,6 +15,7 @@ choice
config SOC_RT288X
bool "RT288x"
+ select MIPS_L1_CACHE_SHIFT_4
config SOC_RT305X
bool "RT305x"
--
1.8.3.2
WARNING: multiple messages have this Message-ID (diff)
From: Florian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Cc: ralf@linux-mips.org, blogic@openwrt.org, jogo@openwrt.org,
mbizon@freebox.fr, cernekee@gmail.com, dgcbueu@gmail.com,
Florian Fainelli <florian@openwrt.org>
Subject: [PATCH 1/3] MIPS: introduce MIPS_L1_CACHE_SHIFT_<N>
Date: Fri, 10 Jan 2014 12:35:12 -0800 [thread overview]
Message-ID: <1389386114-31834-2-git-send-email-florian@openwrt.org> (raw)
Message-ID: <20140110203512.VE6mZUH2C6yjkakIhNdDSkbfBRr1ITwnRV9eV3wNrwY@z> (raw)
In-Reply-To: <1389386114-31834-1-git-send-email-florian@openwrt.org>
In order to avoid keeping an ever growing list of chips which need to
select a specific MIPS_L1_CACHE_SHIFT value introduce multiple internal
and non-exposed Kconfig symbols for the various MIPS_L1_CACHE_SHIFT
values out there and update the relevant Kconfig symbols to select them.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
---
arch/mips/Kconfig | 18 ++++++++++++++++++
arch/mips/pmcs-msp71xx/Kconfig | 1 +
arch/mips/ralink/Kconfig | 1 +
3 files changed, 20 insertions(+)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 17cc7ff..753c5a3 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -183,6 +183,7 @@ config MACH_DECSTATION
select SYS_SUPPORTS_128HZ
select SYS_SUPPORTS_256HZ
select SYS_SUPPORTS_1024HZ
+ select MIPS_L1_CACHE_SHIFT_4
help
This enables support for DEC's MIPS based workstations. For details
see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the
@@ -468,6 +469,7 @@ config SGI_IP22
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
+ select MIPS_L1_CACHE_SHIFT_7
help
This are the SGI Indy, Challenge S and Indigo2, as well as certain
OEM variants like the Tandem CMN B006S. To compile a Linux kernel
@@ -488,6 +490,7 @@ config SGI_IP27
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_NUMA
select SYS_SUPPORTS_SMP
+ select MIPS_L1_CACHE_SHIFT_7
help
This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
workstations. To compile a Linux kernel that runs on these, say Y
@@ -694,6 +697,7 @@ config MIKROTIK_RB532
select SWAP_IO_SPACE
select BOOT_RAW
select ARCH_REQUIRE_GPIOLIB
+ select MIPS_L1_CACHE_SHIFT_4
help
Support the Mikrotik(tm) RouterBoard 532 series,
based on the IDT RC32434 SoC.
@@ -1088,6 +1092,18 @@ config FW_SNIPROM
config BOOT_ELF32
bool
+config MIPS_L1_CACHE_SHIFT_4
+ bool
+
+config MIPS_L1_CACHE_SHIFT_5
+ def_bool y
+
+config MIPS_L1_CACHE_SHIFT_6
+ bool
+
+config MIPS_L1_CACHE_SHIFT_7
+ bool
+
config MIPS_L1_CACHE_SHIFT
int
default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL || SOC_RT288X
@@ -1372,6 +1388,7 @@ config CPU_CAVIUM_OCTEON
select LIBFDT
select USE_OF
select USB_EHCI_BIG_ENDIAN_MMIO
+ select MIPS_L1_CACHE_SHIFT_7
help
The Cavium Octeon processor is a highly integrated chip containing
many ethernet hardware widgets for networking tasks. The processor
@@ -1794,6 +1811,7 @@ config IP22_CPU_SCACHE
config MIPS_CPU_SCACHE
bool
select BOARD_SCACHE
+ select MIPS_L1_CACHE_SHIFT_6
config R5000_CPU_SCACHE
bool
diff --git a/arch/mips/pmcs-msp71xx/Kconfig b/arch/mips/pmcs-msp71xx/Kconfig
index 3482b8c..6073ca4 100644
--- a/arch/mips/pmcs-msp71xx/Kconfig
+++ b/arch/mips/pmcs-msp71xx/Kconfig
@@ -6,6 +6,7 @@ config PMC_MSP4200_EVAL
bool "PMC-Sierra MSP4200 Eval Board"
select IRQ_MSP_SLP
select HW_HAS_PCI
+ select MIPS_L1_CACHE_SHIFT_4
config PMC_MSP4200_GW
bool "PMC-Sierra MSP4200 VoIP Gateway"
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
index 424f034..1bfd1c1 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -15,6 +15,7 @@ choice
config SOC_RT288X
bool "RT288x"
+ select MIPS_L1_CACHE_SHIFT_4
config SOC_RT305X
bool "RT305x"
--
1.8.3.2
next prev parent reply other threads:[~2014-01-10 20:36 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-10 20:35 [PATCH 0/3] MIPS: L1_CACHE_SHIFT updates Florian Fainelli
2014-01-10 20:35 ` Florian Fainelli
2014-01-10 20:35 ` Florian Fainelli [this message]
2014-01-10 20:35 ` [PATCH 1/3] MIPS: introduce MIPS_L1_CACHE_SHIFT_<N> Florian Fainelli
2014-01-11 10:44 ` Jonas Gorski
2014-01-10 20:35 ` [PATCH 2/3] MIPS: update MIPS_L1_CACHE_SHIFT based on MIPS_L1_CACHE_SHIFT_<N> Florian Fainelli
2014-01-10 20:35 ` Florian Fainelli
2014-01-11 10:47 ` Jonas Gorski
2014-01-10 20:35 ` [PATCH 3/3] MIPS: BCM63XX: select correct MIPS_L1_CACHE_SHIFT value Florian Fainelli
2014-01-10 20:35 ` Florian Fainelli
2014-01-11 10:45 ` John Crispin
2014-01-11 10:54 ` Jonas Gorski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1389386114-31834-2-git-send-email-florian@openwrt.org \
--to=florian@openwrt.org \
--cc=blogic@openwrt.org \
--cc=cernekee@gmail.com \
--cc=dgcbueu@gmail.com \
--cc=jogo@openwrt.org \
--cc=linux-mips@linux-mips.org \
--cc=mbizon@freebox.fr \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.