[meta-fsl-arm-extra][PATCH 1/2] wandboard: set PREFERRED_VERSION to 3.0.35

[meta-fsl-arm-extra][PATCH 1/2] wandboard: set PREFERRED_VERSION to 3.0.35

[John Weber]

Set the PREFERRED_VERSION for the Linux kernel to 3.0.35.  Later kernel
recipes may be used by edting the file conf/machine/include/wandboard.inc
and commenting out the line:

PREFERRED_VERSION_linux-wandboard ?= 3.0.35

Signed-off-by: John Weber <rjohnweber@gmail.com>
---
 conf/machine/include/wandboard.inc |    1 +
 1 file changed, 1 insertion(+)

diff --git a/conf/machine/include/wandboard.inc b/conf/machine/include/wandboard.inc
index 5e83ad5..088cdeb 100644
--- a/conf/machine/include/wandboard.inc
+++ b/conf/machine/include/wandboard.inc
@@ -4,6 +4,7 @@ include conf/machine/include/imx-base.inc
 include conf/machine/include/tune-cortexa9.inc
 
 PREFERRED_PROVIDER_virtual/kernel ?= "linux-wandboard"
+PREFERRED_VERSION_linux-wandboard ?= "3.0.35"
 
 SERIAL_CONSOLE = "115200 ttymxc0"
 
-- 
1.7.9.5

[meta-fsl-arm-extra][PATCH 2/2] linux-wandboard: Add recipes for 3.10.17-beta kernel

[John Weber]

Adding recipes for early 3.10.17 kernel support for Wandboard.  The
current branch is unchanged from the Freescale 3.10.17_beta branch.

There is currently no device tree support for Wandboard Quad.

Signed-off-by: John Weber <rjohnweber@gmail.com>
---
 .../linux/linux-wandboard-3.10.17/defconfig        |  332 ++++++++++++++++++++
 recipes-kernel/linux/linux-wandboard_3.10.17.bb    |   15 +
 2 files changed, 347 insertions(+)
 create mode 100644 recipes-kernel/linux/linux-wandboard-3.10.17/defconfig
 create mode 100644 recipes-kernel/linux/linux-wandboard_3.10.17.bb

diff --git a/recipes-kernel/linux/linux-wandboard-3.10.17/defconfig b/recipes-kernel/linux/linux-wandboard-3.10.17/defconfig
new file mode 100644
index 0000000..7d847c8
--- /dev/null
+++ b/recipes-kernel/linux/linux-wandboard-3.10.17/defconfig
@@ -0,0 +1,332 @@
+CONFIG_KERNEL_LZO=y
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_CGROUPS=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+CONFIG_PERF_EVENTS=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_GPIO_PCA953X=y
+CONFIG_ARCH_MXC=y
+CONFIG_MXC_DEBUG_BOARD=y
+CONFIG_MACH_IMX51_DT=y
+CONFIG_MACH_EUKREA_CPUIMX51SD=y
+CONFIG_SOC_IMX53=y
+CONFIG_SOC_IMX6Q=y
+CONFIG_SOC_IMX6SL=y
+CONFIG_SOC_VF610=y
+# CONFIG_SWP_EMULATE is not set
+CONFIG_SMP=y
+CONFIG_VMSPLIT_2G=y
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_INTERACTIVE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_ARM_IMX6_CPUFREQ=y
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_BINFMT_MISC=m
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_TEST_SUSPEND=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_IPV6=y
+CONFIG_NETFILTER=y
+CONFIG_VLAN_8021Q=y
+CONFIG_CAN=y
+CONFIG_CAN_FLEXCAN=y
+CONFIG_CFG80211=y
+CONFIG_CFG80211_WEXT=y
+CONFIG_MAC80211=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+CONFIG_CMA=y
+CONFIG_CMA_SIZE_MBYTES=256
+CONFIG_IMX_WEIM=y
+CONFIG_CONNECTOR=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_SST25L=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_GPMI_NAND=y
+CONFIG_MTD_NAND_MXC=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_AT25=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_AHCI_IMX=y
+CONFIG_PATA_IMX=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+CONFIG_CS89x0=y
+CONFIG_CS89x0_PLATFORM=y
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+CONFIG_SMC91X=y
+CONFIG_SMC911X=y
+CONFIG_SMSC911X=y
+# CONFIG_NET_VENDOR_STMICRO is not set
+CONFIG_ATH_CARDS=y
+CONFIG_ATH6KL=m
+CONFIG_ATH6KL_SDIO=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=m
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_IMX=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_EGALAX=y
+CONFIG_TOUCHSCREEN_ELAN=y
+CONFIG_TOUCHSCREEN_MAX11801=y
+CONFIG_TOUCHSCREEN_MC13783=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_MMA8450=y
+CONFIG_INPUT_ISL29023=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_FSL_LPUART=y
+CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
+CONFIG_FSL_OTP=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_HELPER_AUTO is not set
+CONFIG_I2C_ALGOPCF=m
+CONFIG_I2C_ALGOPCA=m
+CONFIG_I2C_IMX=y
+CONFIG_SPI=y
+CONFIG_SPI_IMX=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_SABRESD_MAX8903=y
+CONFIG_IMX6_USB_CHARGER=y
+CONFIG_SENSORS_MAX17135=y
+CONFIG_SENSORS_MAG3110=y
+CONFIG_THERMAL=y
+CONFIG_CPU_THERMAL=y
+CONFIG_IMX_THERMAL=y
+CONFIG_DEVICE_THERMAL=y
+CONFIG_WATCHDOG=y
+CONFIG_IMX2_WDT=y
+CONFIG_MFD_DA9052_I2C=y
+CONFIG_MFD_MC13XXX_SPI=y
+CONFIG_MFD_MC13XXX_I2C=y
+CONFIG_MFD_MAX17135=y
+CONFIG_MFD_SI476X_CORE=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_DA9052=y
+CONFIG_REGULATOR_ANATOP=y
+CONFIG_REGULATOR_MC13783=y
+CONFIG_REGULATOR_MC13892=y
+CONFIG_REGULATOR_MAX17135=y
+CONFIG_REGULATOR_PFUZE100=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_RADIO_SUPPORT=y
+CONFIG_VIDEO_V4L2_INT_DEVICE=y
+CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_MXC_OUTPUT=y
+CONFIG_VIDEO_MXC_CAPTURE=m
+CONFIG_VIDEO_MXC_CSI_CAMERA=m
+CONFIG_MXC_CAMERA_OV5640=m
+CONFIG_MXC_CAMERA_OV5642=m
+CONFIG_MXC_CAMERA_OV5640_MIPI=m
+CONFIG_MXC_TVIN_ADV7180=m
+CONFIG_MXC_IPU_DEVICE_QUEUE_SDC=m
+CONFIG_VIDEO_MXC_IPU_OUTPUT=y
+CONFIG_VIDEO_MXC_PXP_V4L2=y
+CONFIG_SOC_CAMERA=y
+CONFIG_VIDEO_MX3=y
+CONFIG_RADIO_SI476X=y
+CONFIG_SOC_CAMERA_OV2640=y
+CONFIG_DRM=y
+CONFIG_DRM_VIVANTE=y
+CONFIG_FB=y
+CONFIG_FB_MXS=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_L4F00242T03=y
+CONFIG_LCD_PLATFORM=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_FB_MXC_SYNC_PANEL=y
+CONFIG_FB_MXC_LDB=y
+CONFIG_FB_MXC_MIPI_DSI=y
+CONFIG_FB_MXC_TRULY_WVGA_SYNC_PANEL=y
+CONFIG_FB_MXC_HDMI=y
+CONFIG_FB_MXC_EINK_PANEL=y
+CONFIG_FB_MXS_SII902X=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_SOC=y
+CONFIG_SND_IMX_SOC=y
+CONFIG_SND_SOC_EUKREA_TLV320=y
+CONFIG_SND_SOC_IMX_CS42888=y
+CONFIG_SND_SOC_IMX_WM8962=y
+CONFIG_SND_SOC_IMX_SGTL5000=y
+CONFIG_SND_SOC_IMX_SPDIF=y
+CONFIG_SND_SOC_IMX_MC13783=y
+CONFIG_SND_SOC_IMX_HDMI=y
+CONFIG_SND_SOC_IMX_SI476X=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_UDC=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_PHY=y
+CONFIG_USB_MXS_PHY=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_MMC=y
+CONFIG_MMC_UNSAFE_RESUME=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
+CONFIG_MXC_IPU=y
+CONFIG_MXC_GPU_VIV=y
+CONFIG_MXC_ASRC=y
+CONFIG_MXC_MIPI_CSI2=y
+CONFIG_MXC_MLB150=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_MC13XXX=y
+CONFIG_RTC_DRV_MXC=y
+CONFIG_RTC_DRV_SNVS=y
+CONFIG_DMADEVICES=y
+CONFIG_MXC_PXP_V2=y
+CONFIG_IMX_SDMA=y
+CONFIG_MXS_DMA=y
+CONFIG_STAGING=y
+CONFIG_COMMON_CLK_DEBUG=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_PWM=y
+CONFIG_PWM_IMX=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_UTF8=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_FTRACE is not set
+CONFIG_SECURITYFS=y
+CONFIG_CRYPTO_USER=y
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTS=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_FSL_CAAM=y
+CONFIG_CRYPTO_DEV_FSL_CAAM_SM=y
+CONFIG_CRYPTO_DEV_FSL_CAAM_SM_TEST=y
+CONFIG_CRYPTO_DEV_FSL_CAAM_SECVIO=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=m
diff --git a/recipes-kernel/linux/linux-wandboard_3.10.17.bb b/recipes-kernel/linux/linux-wandboard_3.10.17.bb
new file mode 100644
index 0000000..71365e6
--- /dev/null
+++ b/recipes-kernel/linux/linux-wandboard_3.10.17.bb
@@ -0,0 +1,15 @@
+# adapted from linux-imx.inc, copyright (C) 2012-2013 O.S. Systems Software LTDA
+# Released under the MIT license (see COPYING.MIT for the terms)
+
+include linux-wandboard.inc
+require recipes-kernel/linux/linux-dtb.inc
+
+DEPENDS += "lzop-native bc-native"
+
+# Wandboard branch - based on 3.10.17_1.0.0_beta from Freescale git
+SRCBRANCH = "wandboard_imx_3.10.17_1.0.0_beta"
+SRCREV = "319845263e5483ee2fd2b3ddcf4e969cbbb5ffd4"
+LOCALVERSION = "-1.0.0-wandboard"
+
+
+COMPATIBLE_MACHINE = "(wandboard)"
-- 
1.7.9.5

Re: [meta-fsl-arm-extra][PATCH 1/2] wandboard: set PREFERRED_VERSION to 3.0.35

[Daiane.Angolini]

> -----Original Message-----
> From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale-
> bounces@yoctoproject.org] On Behalf Of John Weber
> Sent: Friday, January 10, 2014 8:13 PM
> To: meta-freescale@yoctoproject.org
> Subject: [meta-freescale] [meta-fsl-arm-extra][PATCH 1/2] wandboard: set
> PREFERRED_VERSION to 3.0.35
> 
> Set the PREFERRED_VERSION for the Linux kernel to 3.0.35.  Later kernel
> recipes may be used by edting the file conf/machine/include/wandboard.inc

*editing*

Is it important to say why would I want to use the old version?

Daiane

> and commenting out the line:
> 
> PREFERRED_VERSION_linux-wandboard ?= 3.0.35
> 
> Signed-off-by: John Weber <rjohnweber@gmail.com>
> ---
>  conf/machine/include/wandboard.inc |    1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/conf/machine/include/wandboard.inc
> b/conf/machine/include/wandboard.inc
> index 5e83ad5..088cdeb 100644
> --- a/conf/machine/include/wandboard.inc
> +++ b/conf/machine/include/wandboard.inc
> @@ -4,6 +4,7 @@ include conf/machine/include/imx-base.inc  include
> conf/machine/include/tune-cortexa9.inc
> 
>  PREFERRED_PROVIDER_virtual/kernel ?= "linux-wandboard"
> +PREFERRED_VERSION_linux-wandboard ?= "3.0.35"
> 
>  SERIAL_CONSOLE = "115200 ttymxc0"
> 
> --
> 1.7.9.5
> 
> _______________________________________________
> meta-freescale mailing list
> meta-freescale@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
> 

Re: [meta-fsl-arm-extra][PATCH 1/2] wandboard: set PREFERRED_VERSION to 3.0.35

[John Weber]

Hi Daiane -

On 1/13/14 6:31 AM, Daiane.Angolini@freescale.com wrote:
>
>> -----Original Message-----
>> From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale-
>> bounces@yoctoproject.org] On Behalf Of John Weber
>> Sent: Friday, January 10, 2014 8:13 PM
>> To: meta-freescale@yoctoproject.org
>> Subject: [meta-freescale] [meta-fsl-arm-extra][PATCH 1/2] wandboard: set
>> PREFERRED_VERSION to 3.0.35
>>
>> Set the PREFERRED_VERSION for the Linux kernel to 3.0.35.  Later kernel
>> recipes may be used by edting the file conf/machine/include/wandboard.inc
> *editing*
>
> Is it important to say why would I want to use the old version?
>
> Daiane
>
The intent of this patch is to preserve the use of the stable kernel once a 
later, but unstable, kernel recipe is introduced.  With this patch I also sent a 
patch for 3.10.17_beta for people to start playing with on Wandboard.  I 
wouldn't want that to be the preferred version, but if developers want to start 
with it then they can do so by uncommenting the line in the machine/conf file.


>> and commenting out the line:
>>
>> PREFERRED_VERSION_linux-wandboard ?= 3.0.35
>>
>> Signed-off-by: John Weber <rjohnweber@gmail.com>
>> ---
>>   conf/machine/include/wandboard.inc |    1 +
>>   1 file changed, 1 insertion(+)
>>
>> diff --git a/conf/machine/include/wandboard.inc
>> b/conf/machine/include/wandboard.inc
>> index 5e83ad5..088cdeb 100644
>> --- a/conf/machine/include/wandboard.inc
>> +++ b/conf/machine/include/wandboard.inc
>> @@ -4,6 +4,7 @@ include conf/machine/include/imx-base.inc  include
>> conf/machine/include/tune-cortexa9.inc
>>
>>   PREFERRED_PROVIDER_virtual/kernel ?= "linux-wandboard"
>> +PREFERRED_VERSION_linux-wandboard ?= "3.0.35"
>>
>>   SERIAL_CONSOLE = "115200 ttymxc0"
>>
>> --
>> 1.7.9.5
>>
>> _______________________________________________
>> meta-freescale mailing list
>> meta-freescale@yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/meta-freescale
>>

Re: [meta-fsl-arm-extra][PATCH 1/2] wandboard: set PREFERRED_VERSION to 3.0.35

[Otavio Salvador]

[-- Attachment #1: Type: text/plain, Size: 1491 bytes --]

On Mon, Jan 13, 2014 at 11:56 AM, John Weber <rjohnweber@gmail.com> wrote:

> Hi Daiane -
>
>
> On 1/13/14 6:31 AM, Daiane.Angolini@freescale.com wrote:
>
>>
>>  -----Original Message-----
>>> From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale-
>>> bounces@yoctoproject.org] On Behalf Of John Weber
>>> Sent: Friday, January 10, 2014 8:13 PM
>>> To: meta-freescale@yoctoproject.org
>>> Subject: [meta-freescale] [meta-fsl-arm-extra][PATCH 1/2] wandboard: set
>>> PREFERRED_VERSION to 3.0.35
>>>
>>> Set the PREFERRED_VERSION for the Linux kernel to 3.0.35.  Later kernel
>>> recipes may be used by edting the file conf/machine/include/
>>> wandboard.inc
>>>
>> *editing*
>>
>> Is it important to say why would I want to use the old version?
>>
>> Daiane
>>
>>  The intent of this patch is to preserve the use of the stable kernel
> once a later, but unstable, kernel recipe is introduced.  With this patch I
> also sent a patch for 3.10.17_beta for people to start playing with on
> Wandboard.  I wouldn't want that to be the preferred version, but if
> developers want to start with it then they can do so by uncommenting the
> line in the machine/conf file.


What Daiane meant to say is it is important to explain it in the commit log
;-)

-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750

[-- Attachment #2: Type: text/html, Size: 2645 bytes --]

Re: [meta-fsl-arm-extra][PATCH 1/2] wandboard: set PREFERRED_VERSION to 3.0.35

[John Weber]

[-- Attachment #1: Type: text/html, Size: 2495 bytes --]