From: marc.ceeeee@gmail.com (Marc Carino)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 0/8] ARM: brcmstb: Add Broadcom STB SoC support
Date: Fri, 17 Jan 2014 11:19:19 -0800 [thread overview]
Message-ID: <1389986367-4010-1-git-send-email-marc.ceeeee@gmail.com> (raw)
This patchset contains the board support package for the
Broadcom BCM7445 ARM-based SoC [1]. These changes contain a
minimal set of code needed for a BCM7445-based board to boot
the Linux kernel.
These changes heavily leverage the OF/devicetree framework.
v4:
- make a reboot driver and put it in the drivers folder
- rework DT bindings to leverage 'syscon'
- rework BSP code to use 'syscon' for all register mappings
- misc. tweaks per suggestions from v3
v3:
- rebased to v3.13-rc8
- switched to using 'multi_v7_defconfig'
- eliminated dependence on compile-time peripheral register access
- moved DT node iomap out from 'init_early'
- misc. minor cleanups from mailing-list discussion for v2
v2:
- rebased to v3.13-rc1
- moved implementation to 'mach-bcm' folder
- added CPU init for B15
v1:
- initial submission
[1] http://www.broadcom.com/products/Cable/Cable-Set-Top-Box-Solutions/BCM7445
Marc Carino (8):
ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs
power: reset: Add reboot driver for brcmstb
ARM: brcmstb: add debug UART for earlyprintk support
ARM: do CPU-specific init for Broadcom Brahma15 cores
ARM: brcmstb: add CPU binding for Broadcom Brahma15
ARM: brcmstb: add misc. DT bindings for brcmstb
ARM: brcmstb: gic: add compatible string for Broadcom Brahma15
ARM: brcmstb: dts: add a reference DTS for Broadcom 7445
.../devicetree/bindings/arm/brcm-brcmstb.txt | 95 ++++++
Documentation/devicetree/bindings/arm/cpus.txt | 1 +
Documentation/devicetree/bindings/arm/gic.txt | 1 +
arch/arm/Kconfig.debug | 16 +-
arch/arm/boot/dts/bcm7445.dts | 111 +++++++
arch/arm/configs/multi_v7_defconfig | 1 +
arch/arm/mach-bcm/Kconfig | 14 +
arch/arm/mach-bcm/Makefile | 4 +
arch/arm/mach-bcm/brcmstb.c | 110 +++++++
arch/arm/mach-bcm/brcmstb.h | 38 +++
arch/arm/mach-bcm/headsmp-brcmstb.S | 34 ++
arch/arm/mach-bcm/hotplug-brcmstb.c | 334 ++++++++++++++++++++
arch/arm/mm/proc-v7.S | 11 +
drivers/power/reset/Kconfig | 10 +
drivers/power/reset/Makefile | 1 +
drivers/power/reset/brcmstb-reboot.c | 120 +++++++
16 files changed, 900 insertions(+), 1 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/brcm-brcmstb.txt
create mode 100644 arch/arm/boot/dts/bcm7445.dts
create mode 100644 arch/arm/mach-bcm/brcmstb.c
create mode 100644 arch/arm/mach-bcm/brcmstb.h
create mode 100644 arch/arm/mach-bcm/headsmp-brcmstb.S
create mode 100644 arch/arm/mach-bcm/hotplug-brcmstb.c
create mode 100644 drivers/power/reset/brcmstb-reboot.c
WARNING: multiple messages have this Message-ID (diff)
From: Marc Carino <marc.ceeeee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Christian Daudt <bcm-xK7y4jjYLqYh9ZMKESR00Q@public.gmane.org>,
Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
Cc: Florian Fainelli
<f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Matt Porter <matt.porter-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Marc Carino <marc.ceeeee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH v4 0/8] ARM: brcmstb: Add Broadcom STB SoC support
Date: Fri, 17 Jan 2014 11:19:19 -0800 [thread overview]
Message-ID: <1389986367-4010-1-git-send-email-marc.ceeeee@gmail.com> (raw)
This patchset contains the board support package for the
Broadcom BCM7445 ARM-based SoC [1]. These changes contain a
minimal set of code needed for a BCM7445-based board to boot
the Linux kernel.
These changes heavily leverage the OF/devicetree framework.
v4:
- make a reboot driver and put it in the drivers folder
- rework DT bindings to leverage 'syscon'
- rework BSP code to use 'syscon' for all register mappings
- misc. tweaks per suggestions from v3
v3:
- rebased to v3.13-rc8
- switched to using 'multi_v7_defconfig'
- eliminated dependence on compile-time peripheral register access
- moved DT node iomap out from 'init_early'
- misc. minor cleanups from mailing-list discussion for v2
v2:
- rebased to v3.13-rc1
- moved implementation to 'mach-bcm' folder
- added CPU init for B15
v1:
- initial submission
[1] http://www.broadcom.com/products/Cable/Cable-Set-Top-Box-Solutions/BCM7445
Marc Carino (8):
ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs
power: reset: Add reboot driver for brcmstb
ARM: brcmstb: add debug UART for earlyprintk support
ARM: do CPU-specific init for Broadcom Brahma15 cores
ARM: brcmstb: add CPU binding for Broadcom Brahma15
ARM: brcmstb: add misc. DT bindings for brcmstb
ARM: brcmstb: gic: add compatible string for Broadcom Brahma15
ARM: brcmstb: dts: add a reference DTS for Broadcom 7445
.../devicetree/bindings/arm/brcm-brcmstb.txt | 95 ++++++
Documentation/devicetree/bindings/arm/cpus.txt | 1 +
Documentation/devicetree/bindings/arm/gic.txt | 1 +
arch/arm/Kconfig.debug | 16 +-
arch/arm/boot/dts/bcm7445.dts | 111 +++++++
arch/arm/configs/multi_v7_defconfig | 1 +
arch/arm/mach-bcm/Kconfig | 14 +
arch/arm/mach-bcm/Makefile | 4 +
arch/arm/mach-bcm/brcmstb.c | 110 +++++++
arch/arm/mach-bcm/brcmstb.h | 38 +++
arch/arm/mach-bcm/headsmp-brcmstb.S | 34 ++
arch/arm/mach-bcm/hotplug-brcmstb.c | 334 ++++++++++++++++++++
arch/arm/mm/proc-v7.S | 11 +
drivers/power/reset/Kconfig | 10 +
drivers/power/reset/Makefile | 1 +
drivers/power/reset/brcmstb-reboot.c | 120 +++++++
16 files changed, 900 insertions(+), 1 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/brcm-brcmstb.txt
create mode 100644 arch/arm/boot/dts/bcm7445.dts
create mode 100644 arch/arm/mach-bcm/brcmstb.c
create mode 100644 arch/arm/mach-bcm/brcmstb.h
create mode 100644 arch/arm/mach-bcm/headsmp-brcmstb.S
create mode 100644 arch/arm/mach-bcm/hotplug-brcmstb.c
create mode 100644 drivers/power/reset/brcmstb-reboot.c
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Marc Carino <marc.ceeeee@gmail.com>
To: Christian Daudt <bcm@fixthebug.org>, Arnd Bergmann <arnd@arndb.de>
Cc: Florian Fainelli <f.fainelli@gmail.com>,
Matt Porter <matt.porter@linaro.org>,
Russell King <linux@arm.linux.org.uk>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
Marc Carino <marc.ceeeee@gmail.com>
Subject: [PATCH v4 0/8] ARM: brcmstb: Add Broadcom STB SoC support
Date: Fri, 17 Jan 2014 11:19:19 -0800 [thread overview]
Message-ID: <1389986367-4010-1-git-send-email-marc.ceeeee@gmail.com> (raw)
This patchset contains the board support package for the
Broadcom BCM7445 ARM-based SoC [1]. These changes contain a
minimal set of code needed for a BCM7445-based board to boot
the Linux kernel.
These changes heavily leverage the OF/devicetree framework.
v4:
- make a reboot driver and put it in the drivers folder
- rework DT bindings to leverage 'syscon'
- rework BSP code to use 'syscon' for all register mappings
- misc. tweaks per suggestions from v3
v3:
- rebased to v3.13-rc8
- switched to using 'multi_v7_defconfig'
- eliminated dependence on compile-time peripheral register access
- moved DT node iomap out from 'init_early'
- misc. minor cleanups from mailing-list discussion for v2
v2:
- rebased to v3.13-rc1
- moved implementation to 'mach-bcm' folder
- added CPU init for B15
v1:
- initial submission
[1] http://www.broadcom.com/products/Cable/Cable-Set-Top-Box-Solutions/BCM7445
Marc Carino (8):
ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs
power: reset: Add reboot driver for brcmstb
ARM: brcmstb: add debug UART for earlyprintk support
ARM: do CPU-specific init for Broadcom Brahma15 cores
ARM: brcmstb: add CPU binding for Broadcom Brahma15
ARM: brcmstb: add misc. DT bindings for brcmstb
ARM: brcmstb: gic: add compatible string for Broadcom Brahma15
ARM: brcmstb: dts: add a reference DTS for Broadcom 7445
.../devicetree/bindings/arm/brcm-brcmstb.txt | 95 ++++++
Documentation/devicetree/bindings/arm/cpus.txt | 1 +
Documentation/devicetree/bindings/arm/gic.txt | 1 +
arch/arm/Kconfig.debug | 16 +-
arch/arm/boot/dts/bcm7445.dts | 111 +++++++
arch/arm/configs/multi_v7_defconfig | 1 +
arch/arm/mach-bcm/Kconfig | 14 +
arch/arm/mach-bcm/Makefile | 4 +
arch/arm/mach-bcm/brcmstb.c | 110 +++++++
arch/arm/mach-bcm/brcmstb.h | 38 +++
arch/arm/mach-bcm/headsmp-brcmstb.S | 34 ++
arch/arm/mach-bcm/hotplug-brcmstb.c | 334 ++++++++++++++++++++
arch/arm/mm/proc-v7.S | 11 +
drivers/power/reset/Kconfig | 10 +
drivers/power/reset/Makefile | 1 +
drivers/power/reset/brcmstb-reboot.c | 120 +++++++
16 files changed, 900 insertions(+), 1 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/brcm-brcmstb.txt
create mode 100644 arch/arm/boot/dts/bcm7445.dts
create mode 100644 arch/arm/mach-bcm/brcmstb.c
create mode 100644 arch/arm/mach-bcm/brcmstb.h
create mode 100644 arch/arm/mach-bcm/headsmp-brcmstb.S
create mode 100644 arch/arm/mach-bcm/hotplug-brcmstb.c
create mode 100644 drivers/power/reset/brcmstb-reboot.c
next reply other threads:[~2014-01-17 19:19 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-17 19:19 Marc Carino [this message]
2014-01-17 19:19 ` [PATCH v4 0/8] ARM: brcmstb: Add Broadcom STB SoC support Marc Carino
2014-01-17 19:19 ` Marc Carino
2014-01-17 19:19 ` [PATCH v4 1/8] ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs Marc Carino
2014-01-17 19:19 ` Marc Carino
2014-01-17 19:19 ` Marc Carino
2014-01-17 19:19 ` [PATCH v4 2/8] power: reset: Add reboot driver for brcmstb Marc Carino
2014-01-17 19:19 ` Marc Carino
2014-01-17 19:19 ` Marc Carino
2014-01-17 19:19 ` [PATCH v4 3/8] ARM: brcmstb: add debug UART for earlyprintk support Marc Carino
2014-01-17 19:19 ` Marc Carino
2014-01-17 19:24 ` Alexander Shiyan
2014-01-17 19:24 ` Alexander Shiyan
2014-01-17 19:24 ` Alexander Shiyan
2014-01-17 19:19 ` [PATCH v4 4/8] ARM: do CPU-specific init for Broadcom Brahma15 cores Marc Carino
2014-01-17 19:19 ` Marc Carino
2014-01-17 19:19 ` [PATCH v4 5/8] ARM: brcmstb: add CPU binding for Broadcom Brahma15 Marc Carino
2014-01-17 19:19 ` Marc Carino
2014-01-17 19:19 ` Marc Carino
2014-01-17 19:19 ` [PATCH v4 6/8] ARM: brcmstb: add misc. DT bindings for brcmstb Marc Carino
2014-01-17 19:19 ` Marc Carino
2014-01-17 19:19 ` [PATCH v4 7/8] ARM: brcmstb: gic: add compatible string for Broadcom Brahma15 Marc Carino
2014-01-17 19:19 ` Marc Carino
2014-01-17 19:19 ` [PATCH v4 8/8] ARM: brcmstb: dts: add a reference DTS for Broadcom 7445 Marc Carino
2014-01-17 19:19 ` Marc Carino
2014-01-17 20:06 ` Arnd Bergmann
2014-01-17 20:06 ` Arnd Bergmann
2014-01-17 20:06 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1389986367-4010-1-git-send-email-marc.ceeeee@gmail.com \
--to=marc.ceeeee@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.