From: Roger Quadros <rogerq@ti.com>
To: bcousson@baylibre.com, tony@atomide.com
Cc: balbi@ti.com, lee.jones@linaro.org, arnd@arndb.de,
sre@debian.org, mark.rutland@arm.com,
m.paolino@virtualopensystems.com, linux-omap@vger.kernel.org,
linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Roger Quadros <rogerq@ti.com>
Subject: [PATCH v6 09/10] ARM: dts: omap5-uevm: Provide USB PHY clock
Date: Mon, 20 Jan 2014 16:11:30 +0200 [thread overview]
Message-ID: <1390227091-4523-10-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1390227091-4523-1-git-send-email-rogerq@ti.com>
The HS USB 2 PHY gets its clock from AUXCLK1. Provide this
information.
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
arch/arm/boot/dts/omap5-uevm.dts | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 002fa70..3b99ec2 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -31,12 +31,8 @@
hsusb2_phy: hsusb2_phy {
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */
- /**
- * FIXME
- * Put the right clock phandle here when available
- * clocks = <&auxclk1>;
- * clock-names = "main_clk";
- */
+ clocks = <&auxclk1_ck>;
+ clock-names = "main_clk";
clock-frequency = <19200000>;
};
--
1.8.3.2
WARNING: multiple messages have this Message-ID (diff)
From: rogerq@ti.com (Roger Quadros)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 09/10] ARM: dts: omap5-uevm: Provide USB PHY clock
Date: Mon, 20 Jan 2014 16:11:30 +0200 [thread overview]
Message-ID: <1390227091-4523-10-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1390227091-4523-1-git-send-email-rogerq@ti.com>
The HS USB 2 PHY gets its clock from AUXCLK1. Provide this
information.
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
arch/arm/boot/dts/omap5-uevm.dts | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 002fa70..3b99ec2 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -31,12 +31,8 @@
hsusb2_phy: hsusb2_phy {
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */
- /**
- * FIXME
- * Put the right clock phandle here when available
- * clocks = <&auxclk1>;
- * clock-names = "main_clk";
- */
+ clocks = <&auxclk1_ck>;
+ clock-names = "main_clk";
clock-frequency = <19200000>;
};
--
1.8.3.2
WARNING: multiple messages have this Message-ID (diff)
From: Roger Quadros <rogerq@ti.com>
To: <bcousson@baylibre.com>, <tony@atomide.com>
Cc: <balbi@ti.com>, <lee.jones@linaro.org>, <arnd@arndb.de>,
<sre@debian.org>, <mark.rutland@arm.com>,
<m.paolino@virtualopensystems.com>, <linux-omap@vger.kernel.org>,
<linux-usb@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, Roger Quadros <rogerq@ti.com>
Subject: [PATCH v6 09/10] ARM: dts: omap5-uevm: Provide USB PHY clock
Date: Mon, 20 Jan 2014 16:11:30 +0200 [thread overview]
Message-ID: <1390227091-4523-10-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1390227091-4523-1-git-send-email-rogerq@ti.com>
The HS USB 2 PHY gets its clock from AUXCLK1. Provide this
information.
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
arch/arm/boot/dts/omap5-uevm.dts | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 002fa70..3b99ec2 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -31,12 +31,8 @@
hsusb2_phy: hsusb2_phy {
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */
- /**
- * FIXME
- * Put the right clock phandle here when available
- * clocks = <&auxclk1>;
- * clock-names = "main_clk";
- */
+ clocks = <&auxclk1_ck>;
+ clock-names = "main_clk";
clock-frequency = <19200000>;
};
--
1.8.3.2
next prev parent reply other threads:[~2014-01-20 14:11 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-20 14:11 [PATCH v6 00/10] USB Host support for OMAP5 uEVM (for 3.14) Roger Quadros
2014-01-20 14:11 ` Roger Quadros
2014-01-20 14:11 ` Roger Quadros
2014-01-20 14:11 ` [PATCH v6 02/10] mfd: omap-usb-host: Get clocks based on hardware revision Roger Quadros
2014-01-20 14:11 ` Roger Quadros
2014-01-20 14:11 ` Roger Quadros
2014-01-20 14:11 ` [PATCH v6 03/10] mfd: omap-usb-host: Use clock names as per function for reference clocks Roger Quadros
2014-01-20 14:11 ` Roger Quadros
2014-01-20 14:11 ` Roger Quadros
2014-01-20 14:11 ` [PATCH v6 04/10] mfd: omap-usb-host: Update DT clock binding information Roger Quadros
2014-01-20 14:11 ` Roger Quadros
2014-01-20 14:11 ` Roger Quadros
[not found] ` <1390227091-4523-1-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
2014-01-20 14:11 ` [PATCH v6 01/10] mfd: omap-usb-host: Use resource managed clk_get() Roger Quadros
2014-01-20 14:11 ` Roger Quadros
2014-01-20 14:11 ` Roger Quadros
2014-01-20 14:11 ` [PATCH v6 05/10] mfd: omap-usb-tll: Update DT clock binding information Roger Quadros
2014-01-20 14:11 ` Roger Quadros
2014-01-20 14:11 ` Roger Quadros
2014-01-20 14:11 ` [PATCH v6 06/10] ARM: dts: omap4: Update omap-usb-host node Roger Quadros
2014-01-20 14:11 ` Roger Quadros
2014-01-20 14:11 ` Roger Quadros
2014-01-20 14:11 ` [PATCH v6 07/10] ARM: dts: omap5: " Roger Quadros
2014-01-20 14:11 ` Roger Quadros
2014-01-20 14:11 ` Roger Quadros
2014-01-20 14:11 ` [PATCH v6 08/10] ARM: dts: omap4-panda: Provide USB PHY clock Roger Quadros
2014-01-20 14:11 ` Roger Quadros
2014-01-20 14:11 ` Roger Quadros
2014-01-20 14:11 ` Roger Quadros [this message]
2014-01-20 14:11 ` [PATCH v6 09/10] ARM: dts: omap5-uevm: " Roger Quadros
2014-01-20 14:11 ` Roger Quadros
2014-01-20 14:11 ` [PATCH v6 10/10] ARM: OMAP2+: Remove legacy_init_ehci_clk() Roger Quadros
2014-01-20 14:11 ` Roger Quadros
2014-01-20 14:11 ` Roger Quadros
2014-01-21 17:19 ` [PATCH v6 00/10] USB Host support for OMAP5 uEVM (for 3.14) Lee Jones
2014-01-21 17:19 ` Lee Jones
2014-01-21 17:19 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1390227091-4523-10-git-send-email-rogerq@ti.com \
--to=rogerq@ti.com \
--cc=arnd@arndb.de \
--cc=balbi@ti.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=m.paolino@virtualopensystems.com \
--cc=mark.rutland@arm.com \
--cc=sre@debian.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.