From: Olivier Langlois <olivier-VxAV575H0jR+kJTeVDPgHg@public.gmane.org>
To: Takashi Iwai <tiwai-l3A5Bk7waGM@public.gmane.org>
Cc: LANGLOIS Olivier PIS -EXT
<olivier.pis.langlois-XS9+L/t3R/8JfuP8PSSGd1aTQe2KTcn/@public.gmane.org>,
"alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org"
<alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org>,
"linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
James Cameron <quozl-2X9k7bc8m7Mdnm+yROfE0A@public.gmane.org>,
"daniel-cYrQPVfZoowdnm+yROfE0A@public.gmane.org"
<daniel-cYrQPVfZoowdnm+yROfE0A@public.gmane.org>
Subject: Re: [alsa-devel] [ISSUE] rtl8192ce appears to interfere with ALSA playback
Date: Fri, 24 Jan 2014 00:32:39 -0500 [thread overview]
Message-ID: <1390541559.2436.125.camel@Wailaba2> (raw)
In-Reply-To: <s5h1tzyu0em.wl%tiwai-l3A5Bk7waGM@public.gmane.org>
Takashi,
On Thu, 2014-01-23 at 17:29 +0100, Takashi Iwai wrote:
> Which machine and codec? For example, Lenovo IdeaPad with ALC269 is
> known to be broken with 48kHz, so we have a fixed rate limitation in
> the driver.
>
it is a hpmini. I have this from dmesg:
[ 9.638142] hda_codec: 92HD81B1X5: Apply fix-func for HP
[ 9.639859] hda-codec: Enable HP auto-muting on NID 0xb
[ 9.639888] hda-codec: Enable auto-mic switch on NID 0x11/0xa/0x0
[ 9.642312] hda_codec: 92HD81B1X5: Apply fix-func for HP
> Other than the hardware restriction, you may play more with
> position_fix or bdl_pos_adj option of snd-hda-intel driver.
>
thank you for the advice. I'll take a look on these params to see what
they do. However, because my sound card works very well all the time
except that I have underruns that happens only when wpa_supplicant is
doing this:
wlan0: Control interface command 'STATUS'
wlan0: State: DISCONNECTED -> SCANNING
...
wlan0: No suitable network found
wlan0: Setting scan request: 5 sec 0 usec
wlan0: Checking for other virtual interfaces sharing same radio (phy0)
in event_scan_results
wlan0: Starting AP scan for wildcard SSID
WPS: Building WPS IE for Probe Request
WPS: * Version (hardcoded 0x10)
WPS: * Request Type
WPS: * Config Methods (148)
WPS: * UUID-E
WPS: * Primary Device Type
WPS: * RF Bands (1)
WPS: * Association State
WPS: * Configuration Error (0)
WPS: * Device Password ID (0)
WPS: * Device Name
P2P: * P2P IE header
P2P: * Capability dev=21 group=00
P2P: * Listen Channel: Regulatory Class 81 Channel 1
nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
nl80211: Scan extra IEs - hexdump(len=101): xxx
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: Scan trigger
nl80211: Event message available
nl80211: New scan results available
wlan0: Event SCAN_RESULTS (3) received
nl80211: Received scan results (19 BSSes)
wlan0: BSS: Start scan result update 2
when wlan0 goes to connected or I just turn off the wifi, underruns go
away, I'll check first what rtl8192ce's nl80211 interface implementation
does when asked to perform a scan.
thank you again for your suggestions,
Olivier
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Olivier Langlois <olivier@trillion01.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: LANGLOIS Olivier PIS -EXT
<olivier.pis.langlois@transport.alstom.com>,
"alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>,
"linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>,
James Cameron <quozl@laptop.org>,
"daniel@zonque.org" <daniel@zonque.org>
Subject: Re: [alsa-devel] [ISSUE] rtl8192ce appears to interfere with ALSA playback
Date: Fri, 24 Jan 2014 00:32:39 -0500 [thread overview]
Message-ID: <1390541559.2436.125.camel@Wailaba2> (raw)
In-Reply-To: <s5h1tzyu0em.wl%tiwai@suse.de>
Takashi,
On Thu, 2014-01-23 at 17:29 +0100, Takashi Iwai wrote:
> Which machine and codec? For example, Lenovo IdeaPad with ALC269 is
> known to be broken with 48kHz, so we have a fixed rate limitation in
> the driver.
>
it is a hpmini. I have this from dmesg:
[ 9.638142] hda_codec: 92HD81B1X5: Apply fix-func for HP
[ 9.639859] hda-codec: Enable HP auto-muting on NID 0xb
[ 9.639888] hda-codec: Enable auto-mic switch on NID 0x11/0xa/0x0
[ 9.642312] hda_codec: 92HD81B1X5: Apply fix-func for HP
> Other than the hardware restriction, you may play more with
> position_fix or bdl_pos_adj option of snd-hda-intel driver.
>
thank you for the advice. I'll take a look on these params to see what
they do. However, because my sound card works very well all the time
except that I have underruns that happens only when wpa_supplicant is
doing this:
wlan0: Control interface command 'STATUS'
wlan0: State: DISCONNECTED -> SCANNING
...
wlan0: No suitable network found
wlan0: Setting scan request: 5 sec 0 usec
wlan0: Checking for other virtual interfaces sharing same radio (phy0)
in event_scan_results
wlan0: Starting AP scan for wildcard SSID
WPS: Building WPS IE for Probe Request
WPS: * Version (hardcoded 0x10)
WPS: * Request Type
WPS: * Config Methods (148)
WPS: * UUID-E
WPS: * Primary Device Type
WPS: * RF Bands (1)
WPS: * Association State
WPS: * Configuration Error (0)
WPS: * Device Password ID (0)
WPS: * Device Name
P2P: * P2P IE header
P2P: * Capability dev=21 group=00
P2P: * Listen Channel: Regulatory Class 81 Channel 1
nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
nl80211: Scan extra IEs - hexdump(len=101): xxx
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: Scan trigger
nl80211: Event message available
nl80211: New scan results available
wlan0: Event SCAN_RESULTS (3) received
nl80211: Received scan results (19 BSSes)
wlan0: BSS: Start scan result update 2
when wlan0 goes to connected or I just turn off the wifi, underruns go
away, I'll check first what rtl8192ce's nl80211 interface implementation
does when asked to perform a scan.
thank you again for your suggestions,
Olivier
next prev parent reply other threads:[~2014-01-24 5:32 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-15 6:37 [ISSUE] rtl8192ce appears to interfere with ALSA playback Olivier Langlois
2014-01-15 17:01 ` Larry Finger
2014-01-16 5:25 ` Olivier Langlois
2014-01-16 5:55 ` James Cameron
2014-01-23 8:13 ` Olivier Langlois
2014-01-23 8:13 ` Olivier Langlois
2014-01-23 8:51 ` [alsa-devel] " Takashi Iwai
2014-01-23 8:51 ` Takashi Iwai
2014-01-23 16:15 ` LANGLOIS Olivier PIS -EXT
2014-01-23 16:15 ` [alsa-devel] " LANGLOIS Olivier PIS -EXT
2014-01-23 16:21 ` LANGLOIS Olivier PIS -EXT
2014-01-23 16:28 ` Takashi Iwai
2014-01-23 16:36 ` LANGLOIS Olivier PIS -EXT
2014-01-23 16:40 ` Takashi Iwai
2014-01-23 16:50 ` LANGLOIS Olivier PIS -EXT
2014-01-23 16:52 ` Takashi Iwai
[not found] ` <89F8E4011FD7234ABFE48744E300CBC206BCE732-mYYER/oPuzr5ytm4Ncodt1/tZ8AoKt9cLnY5E4hWTkheoWH0uzbU5w@public.gmane.org>
2014-01-23 16:29 ` [alsa-devel] " Takashi Iwai
2014-01-23 16:29 ` Takashi Iwai
[not found] ` <s5h1tzyu0em.wl%tiwai-l3A5Bk7waGM@public.gmane.org>
2014-01-24 5:32 ` Olivier Langlois [this message]
2014-01-24 5:32 ` Olivier Langlois
2014-01-27 6:32 ` Olivier Langlois
2014-01-27 6:54 ` James Cameron
2014-01-27 7:08 ` Olivier Langlois
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1390541559.2436.125.camel@Wailaba2 \
--to=olivier-vxav575h0jr+kjtevdpghg@public.gmane.org \
--cc=alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org \
--cc=daniel-cYrQPVfZoowdnm+yROfE0A@public.gmane.org \
--cc=linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=olivier.pis.langlois-XS9+L/t3R/8JfuP8PSSGd1aTQe2KTcn/@public.gmane.org \
--cc=quozl-2X9k7bc8m7Mdnm+yROfE0A@public.gmane.org \
--cc=tiwai-l3A5Bk7waGM@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.