All of lore.kernel.org
 help / color / mirror / Atom feed
From: navin patidar <navin.patidar@gmail.com>
To: gregkh@linuxfoundation.org
Cc: devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org,
	navin patidar <navin.patidar@gmail.com>
Subject: [PATCH 1/3] staging: rtl8188eu: remove header file if_ether.h
Date: Sun,  9 Feb 2014 14:10:44 +0530	[thread overview]
Message-ID: <1391935247-3797-1-git-send-email-navin.patidar@gmail.com> (raw)

"if_ether.h" is included in three files but not being used, so
remove "include/if_ether.h" header file and inclusion of this header file.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
---
 drivers/staging/rtl8188eu/core/rtw_recv.c      |    1 -
 drivers/staging/rtl8188eu/hal/rtl8188eu_recv.c |    1 -
 drivers/staging/rtl8188eu/include/if_ether.h   |  111 ------------------------
 drivers/staging/rtl8188eu/os_dep/xmit_linux.c  |    1 -
 4 files changed, 114 deletions(-)
 delete mode 100644 drivers/staging/rtl8188eu/include/if_ether.h

diff --git a/drivers/staging/rtl8188eu/core/rtw_recv.c b/drivers/staging/rtl8188eu/core/rtw_recv.c
index 8490d51..92fb12e 100644
--- a/drivers/staging/rtl8188eu/core/rtw_recv.c
+++ b/drivers/staging/rtl8188eu/core/rtw_recv.c
@@ -24,7 +24,6 @@
 #include <recv_osdep.h>
 #include <mlme_osdep.h>
 #include <ip.h>
-#include <if_ether.h>
 #include <ethernet.h>
 #include <usb_ops.h>
 #include <wifi.h>
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188eu_recv.c b/drivers/staging/rtl8188eu/hal/rtl8188eu_recv.c
index 17c94f4..6e84f08 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188eu_recv.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188eu_recv.c
@@ -23,7 +23,6 @@
 #include <recv_osdep.h>
 #include <mlme_osdep.h>
 #include <ip.h>
-#include <if_ether.h>
 #include <ethernet.h>
 
 #include <usb_ops.h>
diff --git a/drivers/staging/rtl8188eu/include/if_ether.h b/drivers/staging/rtl8188eu/include/if_ether.h
deleted file mode 100644
index db15771..0000000
--- a/drivers/staging/rtl8188eu/include/if_ether.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- *
- ******************************************************************************/
-
-#ifndef _LINUX_IF_ETHER_H
-#define _LINUX_IF_ETHER_H
-
-/*
- *	IEEE 802.3 Ethernet magic constants.  The frame sizes omit the preamble
- *	and FCS/CRC (frame check sequence).
- */
-
-#define ETH_ALEN	6		/* Octets in one ethernet addr	 */
-#define ETH_HLEN	14		/* Total octets in header.	 */
-#define ETH_ZLEN	60		/* Min. octets in frame sans FCS */
-#define ETH_DATA_LEN	1500		/* Max. octets in payload	 */
-#define ETH_FRAME_LEN	1514		/* Max. octets in frame sans FCS */
-
-/*
- *	These are the defined Ethernet Protocol ID's.
- */
-
-#define ETH_P_LOOP	0x0060		/* Ethernet Loopback packet	*/
-#define ETH_P_PUP	0x0200		/* Xerox PUP packet		*/
-#define ETH_P_PUPAT	0x0201		/* Xerox PUP Addr Trans packet	*/
-#define ETH_P_IP	0x0800		/* Internet Protocol packet	*/
-#define ETH_P_X25	0x0805		/* CCITT X.25			*/
-#define ETH_P_ARP	0x0806		/* Address Resolution packet	*/
-#define	ETH_P_BPQ	0x08FF		/* G8BPQ AX.25 Ethernet Packet  */
-#define ETH_P_IEEEPUP	0x0a00		/* Xerox IEEE802.3 PUP packet   */
-#define ETH_P_IEEEPUPAT	0x0a01		/* Xerox IEEE802.3 PUP		*/
-#define ETH_P_DEC       0x6000          /* DEC Assigned proto           */
-#define ETH_P_DNA_DL    0x6001          /* DEC DNA Dump/Load            */
-#define ETH_P_DNA_RC    0x6002          /* DEC DNA Remote Console       */
-#define ETH_P_DNA_RT    0x6003          /* DEC DNA Routing              */
-#define ETH_P_LAT       0x6004          /* DEC LAT                      */
-#define ETH_P_DIAG      0x6005          /* DEC Diagnostics              */
-#define ETH_P_CUST      0x6006          /* DEC Customer use             */
-#define ETH_P_SCA       0x6007          /* DEC Systems Comms Arch       */
-#define ETH_P_RARP      0x8035		/* Reverse Addr Res packet	*/
-#define ETH_P_ATALK	0x809B		/* Appletalk DDP		*/
-#define ETH_P_AARP	0x80F3		/* Appletalk AARP		*/
-#define ETH_P_8021Q	0x8100          /* 802.1Q VLAN Extended Header  */
-#define ETH_P_IPX	0x8137		/* IPX over DIX			*/
-#define ETH_P_IPV6	0x86DD		/* IPv6 over bluebook		*/
-#define ETH_P_PPP_DISC	0x8863		/* PPPoE discovery messages     */
-#define ETH_P_PPP_SES	0x8864		/* PPPoE session messages	*/
-#define ETH_P_ATMMPOA	0x884c		/* MultiProtocol Over ATM	*/
-#define ETH_P_ATMFATE	0x8884		/* Frame-based ATM Transport
-					 * over Ethernet
-					 */
-
-/*
- *	Non DIX types. Won't clash for 1500 types.
- */
-
-#define ETH_P_802_3	0x0001		/* Dummy type for 802.3 frames  */
-#define ETH_P_AX25	0x0002		/* Dummy protocol id for AX.25  */
-#define ETH_P_ALL	0x0003		/* Every packet (be careful!!!) */
-#define ETH_P_802_2	0x0004		/* 802.2 frames			*/
-#define ETH_P_SNAP	0x0005		/* Internal only		*/
-#define ETH_P_DDCMP     0x0006          /* DEC DDCMP: Internal only     */
-#define ETH_P_WAN_PPP   0x0007          /* Dummy type for WAN PPP frames*/
-#define ETH_P_PPP_MP    0x0008          /* Dummy type for PPP MP frames */
-#define ETH_P_LOCALTALK 0x0009		/* Localtalk pseudo type	*/
-#define ETH_P_PPPTALK	0x0010		/* Dummy type for Atalk over PPP*/
-#define ETH_P_TR_802_2	0x0011		/* 802.2 frames			*/
-#define ETH_P_MOBITEX	0x0015		/* Mobitex (kaz@cafe.net)	*/
-#define ETH_P_CONTROL	0x0016		/* Card specific control frames */
-#define ETH_P_IRDA	0x0017		/* Linux-IrDA			*/
-#define ETH_P_ECONET	0x0018		/* Acorn Econet			*/
-
-/*
- *	This is an Ethernet frame header.
- */
-
-struct ethhdr {
-	unsigned char	h_dest[ETH_ALEN];	/* destination eth addr	*/
-	unsigned char	h_source[ETH_ALEN];	/* source ether addr	*/
-	unsigned short	h_proto;		/* packet type ID field	*/
-};
-
-struct _vlan {
-	unsigned short       h_vlan_TCI;	/*  Encap prio and VLAN ID */
-	unsigned short       h_vlan_encapsulated_proto;
-};
-
-#define get_vlan_id(pvlan)				\
-	((ntohs((unsigned short)pvlan->h_vlan_TCI)) & 0xfff)
-#define get_vlan_priority(pvlan)			\
-	((ntohs((unsigned short)pvlan->h_vlan_TCI))>>13)
-#define get_vlan_encap_proto(pvlan)			\
-	 (ntohs((unsigned short)pvlan->h_vlan_encapsulated_proto))
-
-#endif	/* _LINUX_IF_ETHER_H */
diff --git a/drivers/staging/rtl8188eu/os_dep/xmit_linux.c b/drivers/staging/rtl8188eu/os_dep/xmit_linux.c
index 9005971..24a8407 100644
--- a/drivers/staging/rtl8188eu/os_dep/xmit_linux.c
+++ b/drivers/staging/rtl8188eu/os_dep/xmit_linux.c
@@ -23,7 +23,6 @@
 #include <osdep_service.h>
 #include <drv_types.h>
 
-#include <if_ether.h>
 #include <ip.h>
 #include <wifi.h>
 #include <mlme_osdep.h>
-- 
1.7.10.4


             reply	other threads:[~2014-02-09  8:41 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-09  8:40 navin patidar [this message]
2014-02-09  8:40 ` [PATCH 2/3] staging: rtl8188eu: remove header file ip.h navin patidar
2014-02-09  8:40 ` [PATCH 3/3] staging: rtl8188eu: remove header file ethernet.h navin patidar
2014-02-11 20:33   ` Greg KH
2014-02-12 16:12     ` navin patidar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1391935247-3797-1-git-send-email-navin.patidar@gmail.com \
    --to=navin.patidar@gmail.com \
    --cc=devel@driverdev.osuosl.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.