All of lore.kernel.org
 help / color / mirror / Atom feed
From: navin patidar <navin.patidar@gmail.com>
To: gregkh@linuxfoundation.org
Cc: devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org,
	navin patidar <navin.patidar@gmail.com>
Subject: [PATCH 2/3] staging: rtl8188eu: remove header file ip.h
Date: Sun,  9 Feb 2014 14:10:45 +0530	[thread overview]
Message-ID: <1391935247-3797-2-git-send-email-navin.patidar@gmail.com> (raw)
In-Reply-To: <1391935247-3797-1-git-send-email-navin.patidar@gmail.com>

"ip.h" is included in four files but not being used, so
remove "include/ip.h" header file and inclusion of this header file.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
---
 drivers/staging/rtl8188eu/core/rtw_recv.c      |    1 -
 drivers/staging/rtl8188eu/core/rtw_xmit.c      |    1 -
 drivers/staging/rtl8188eu/hal/rtl8188eu_recv.c |    1 -
 drivers/staging/rtl8188eu/include/ip.h         |  126 ------------------------
 drivers/staging/rtl8188eu/os_dep/xmit_linux.c  |    1 -
 5 files changed, 130 deletions(-)
 delete mode 100644 drivers/staging/rtl8188eu/include/ip.h

diff --git a/drivers/staging/rtl8188eu/core/rtw_recv.c b/drivers/staging/rtl8188eu/core/rtw_recv.c
index 92fb12e..b49a246 100644
--- a/drivers/staging/rtl8188eu/core/rtw_recv.c
+++ b/drivers/staging/rtl8188eu/core/rtw_recv.c
@@ -23,7 +23,6 @@
 #include <drv_types.h>
 #include <recv_osdep.h>
 #include <mlme_osdep.h>
-#include <ip.h>
 #include <ethernet.h>
 #include <usb_ops.h>
 #include <wifi.h>
diff --git a/drivers/staging/rtl8188eu/core/rtw_xmit.c b/drivers/staging/rtl8188eu/core/rtw_xmit.c
index aa77270..ca7a25a 100644
--- a/drivers/staging/rtl8188eu/core/rtw_xmit.c
+++ b/drivers/staging/rtl8188eu/core/rtw_xmit.c
@@ -23,7 +23,6 @@
 #include <drv_types.h>
 #include <wifi.h>
 #include <osdep_intf.h>
-#include <ip.h>
 #include <usb_ops.h>
 #include <usb_osintf.h>
 
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188eu_recv.c b/drivers/staging/rtl8188eu/hal/rtl8188eu_recv.c
index 6e84f08..540c5ad 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188eu_recv.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188eu_recv.c
@@ -22,7 +22,6 @@
 #include <drv_types.h>
 #include <recv_osdep.h>
 #include <mlme_osdep.h>
-#include <ip.h>
 #include <ethernet.h>
 
 #include <usb_ops.h>
diff --git a/drivers/staging/rtl8188eu/include/ip.h b/drivers/staging/rtl8188eu/include/ip.h
deleted file mode 100644
index 9fdac6d..0000000
--- a/drivers/staging/rtl8188eu/include/ip.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- *
- ******************************************************************************/
-#ifndef _LINUX_IP_H
-#define _LINUX_IP_H
-
-/* SOL_IP socket options */
-
-#define IPTOS_TOS_MASK		0x1E
-#define IPTOS_TOS(tos)		((tos)&IPTOS_TOS_MASK)
-#define	IPTOS_LOWDELAY		0x10
-#define	IPTOS_THROUGHPUT	0x08
-#define	IPTOS_RELIABILITY	0x04
-#define	IPTOS_MINCOST		0x02
-
-#define IPTOS_PREC_MASK		0xE0
-#define IPTOS_PREC(tos)		((tos)&IPTOS_PREC_MASK)
-#define IPTOS_PREC_NETCONTROL           0xe0
-#define IPTOS_PREC_INTERNETCONTROL      0xc0
-#define IPTOS_PREC_CRITIC_ECP           0xa0
-#define IPTOS_PREC_FLASHOVERRIDE        0x80
-#define IPTOS_PREC_FLASH                0x60
-#define IPTOS_PREC_IMMEDIATE            0x40
-#define IPTOS_PREC_PRIORITY             0x20
-#define IPTOS_PREC_ROUTINE              0x00
-
-
-/* IP options */
-#define IPOPT_COPY		0x80
-#define IPOPT_CLASS_MASK	0x60
-#define IPOPT_NUMBER_MASK	0x1f
-
-#define	IPOPT_COPIED(o)		((o)&IPOPT_COPY)
-#define	IPOPT_CLASS(o)		((o)&IPOPT_CLASS_MASK)
-#define	IPOPT_NUMBER(o)		((o)&IPOPT_NUMBER_MASK)
-
-#define	IPOPT_CONTROL		0x00
-#define	IPOPT_RESERVED1		0x20
-#define	IPOPT_MEASUREMENT	0x40
-#define	IPOPT_RESERVED2		0x60
-
-#define IPOPT_END	(0 | IPOPT_CONTROL)
-#define IPOPT_NOOP	(1 | IPOPT_CONTROL)
-#define IPOPT_SEC	(2 | IPOPT_CONTROL | IPOPT_COPY)
-#define IPOPT_LSRR	(3 | IPOPT_CONTROL | IPOPT_COPY)
-#define IPOPT_TIMESTAMP	(4 | IPOPT_MEASUREMENT)
-#define IPOPT_RR	(7 | IPOPT_CONTROL)
-#define IPOPT_SID	(8 | IPOPT_CONTROL | IPOPT_COPY)
-#define IPOPT_SSRR	(9 | IPOPT_CONTROL | IPOPT_COPY)
-#define IPOPT_RA	(20 | IPOPT_CONTROL | IPOPT_COPY)
-
-#define IPVERSION	4
-#define MAXTTL		255
-#define IPDEFTTL	64
-#define IPOPT_OPTVAL 0
-#define IPOPT_OLEN   1
-#define IPOPT_OFFSET 2
-#define IPOPT_MINOFF 4
-#define MAX_IPOPTLEN 40
-#define IPOPT_NOP IPOPT_NOOP
-#define IPOPT_EOL IPOPT_END
-#define IPOPT_TS  IPOPT_TIMESTAMP
-
-#define	IPOPT_TS_TSONLY		0	/* timestamps only */
-#define	IPOPT_TS_TSANDADDR	1	/* timestamps and addresses */
-#define	IPOPT_TS_PRESPEC	3	/* specified modules only */
-
-struct ip_options {
-	__u32		faddr;			/* Saved first hop address */
-	unsigned char	optlen;
-	unsigned char srr;
-	unsigned char rr;
-	unsigned char ts;
-	unsigned char	is_setbyuser:1,	/* Set by setsockopt?		*/
-			is_data:1,	/* Options in __data, rather than skb*/
-			is_strictroute:1,/* Strict source route		*/
-			srr_is_hit:1,	/* Packet destn addr was ours */
-			is_changed:1,	/* IP checksum more not valid	*/
-			rr_needaddr:1,	/* Need to record addr of out dev*/
-			ts_needtime:1,	/* Need to record timestamp	*/
-			ts_needaddr:1;	/* Need to record addr of out dev  */
-	unsigned char router_alert;
-	unsigned char __pad1;
-	unsigned char __pad2;
-	unsigned char __data[0];
-};
-
-#define optlength(opt) (sizeof(struct ip_options) + opt->optlen)
-
-struct iphdr {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8	ihl:4,
-		version:4;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-	__u8	version:4,
-		ihl:4;
-#endif
-	__u8	tos;
-	__u16	tot_len;
-	__u16	id;
-	__u16	frag_off;
-	__u8	ttl;
-	__u8	protocol;
-	__u16	check;
-	__u32	saddr;
-	__u32	daddr;
-	/*The options start here. */
-};
-
-#endif	/* _LINUX_IP_H */
diff --git a/drivers/staging/rtl8188eu/os_dep/xmit_linux.c b/drivers/staging/rtl8188eu/os_dep/xmit_linux.c
index 24a8407..8097903 100644
--- a/drivers/staging/rtl8188eu/os_dep/xmit_linux.c
+++ b/drivers/staging/rtl8188eu/os_dep/xmit_linux.c
@@ -23,7 +23,6 @@
 #include <osdep_service.h>
 #include <drv_types.h>
 
-#include <ip.h>
 #include <wifi.h>
 #include <mlme_osdep.h>
 #include <xmit_osdep.h>
-- 
1.7.10.4


  reply	other threads:[~2014-02-09  8:41 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-09  8:40 [PATCH 1/3] staging: rtl8188eu: remove header file if_ether.h navin patidar
2014-02-09  8:40 ` navin patidar [this message]
2014-02-09  8:40 ` [PATCH 3/3] staging: rtl8188eu: remove header file ethernet.h navin patidar
2014-02-11 20:33   ` Greg KH
2014-02-12 16:12     ` navin patidar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1391935247-3797-2-git-send-email-navin.patidar@gmail.com \
    --to=navin.patidar@gmail.com \
    --cc=devel@driverdev.osuosl.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.